Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Circuits and Systems I Regular Papers

A Network-Efficient Nonbinary QC-LDPC Decoder Architecture

Chuan Zhang, Keshab K. Parhi

Published Jan 17, 2012• 12 citations
Publisher

Abstract

Nonbinary low-density parity-check (LDPC) codes are of great interest due to their better performance cover binary ones when the code length is moderate. However, the cost of decoder implementation for these LDPC codes is still very high. In this paper, a low-complexity VLSI architecture for nonbinary LDPC decoders is presented. By exploiting the intrinsic shifting and symmetry properties of nonbinary quasi-cyclic LDPC (QC-LDPC) codes, significant reduction of memory size and routing complexity can be achieved. These unique features lead to two network-efficient decoder architectures for Class-I and Class-II nonbinary QC-LDPC codes, respectively. Comparison results with the state-of-the-art designs show that for the code example of the 64-ary (1260, 630) rate-0.5 Class-I code, the proposed scheme can save up to 70.6% hardware required by switch network, which demonstrates the efficiency of the proposed technique. The proposed design for the 32-ary (992, 496) rate-0.5 Class-II code can achieve a 93.8% switch network complexity reduction compared with conventional approaches. Furthermore, with the help of a generator for possible solution sequences, both forward and backward steps can be eliminated to offer processing convenience of check node unit (CNU) blocks. Results show the proposed 32-ary (992, 496) rate-0.5 Class-II decoder can achieve 4.47 Mb/s decoding throughput at a clock speed of 150 MHz.

DOI
10.1109/tcsi.2011.2177001

Related papers

Efficient network for non-binary QC-LDPC decoder

Chuan Zhang, Jin Sha

This paper presents approaches to develop efficient network for non-binary quasi-cyclic LDPC (QC-LDPC) decoders. By exploiting the intrinsic shifting and symmetry properties of the check matrices, significant reduction of memory size and routing complexity can be achieved. Two different efficient network architectures for Class-I and Class-II non-binary QC-LDPC decoders have been proposed, respectively. Comparison results have shown that for the code of the 64-ary (1260, 630) rate-0.5 Class-I code, the proposed scheme can save more than 70.6% hardware required by shuffle network than the state-of-the-art designs. The proposed decoder example for the 32-ary (992, 496) rate-0.5 Class-II code can achieve a 93.8% shuffle network reduction compared with the conventional ones. Meanwhile, based on the similarity of Class-I and Class-II codes, similar shuffle network is further developed to incorporate both classes of codes at a very low cost.

arXiv:1111.0703•IEEE International Symposium on Circuits and Systems proceedings•May 1, 2012•1 citation

Performance Analysis and Implementation for Nonbinary Quasi-Cyclic LDPC Decoder Architecture

Tony Tsang

Non-binary low-density parity check (NB-LDPC) codes are an extension of binary LDPC codes with significantly better performance.Although various kinds of low-complexity iterative decoding algorithms have been proposed, there is a big challenge for VLSI implementation of NBLDPC decoders due to its high complexity and long latency.In this brief, highly efficient check node processing scheme, which the processing delay greatly reduced, including Min-Max decoding algorithm and check node unit are proposed.Compare with previous works, less than 52% could be reduced for the latency of check node unit.In addition, the efficiency of the presented techniques is design to demonstrate for the (620, 310) NB-QC-LDPC decoder.

International Journal of Wireless & Mobile Networks•Aug 31, 2014•0 citations

Efficient Decoder Design for Nonbinary Quasicyclic LDPC Codes

Jun Ting Lin, Jin Sha, Zhongfeng Wang +1 more

This paper addresses decoder design for nonbinary quasicyclic low-density parity-check (QC-LDPC) codes. First, a novel decoding algorithm is proposed to eliminate the multiplications over Galois field for check node processing. Then, a partially parallel architecture for check node processing units and an optimized architecture for variable node processing units are developed based on the new decoding algorithm. Thereafter, an efficient decoder structure dedicated to a promising class of high-performance nonbinary QC-LDPC codes is presented for the first time. Moreover, an ASIC implementation for a (620, 310) nonbinary QC-LDPC code decoder over GF(32) is designed to demonstrate the efficiency of the presented techniques.

IEEE Transactions on Circuits and Systems I Regular Papers•May 1, 2010•69 citations

Reduced-Complexity Decoder Architecture for Non-Binary LDPC Codes

Xinmiao Zhang, Fang Cai

Non-binary low-density parity-check (NB-LDPC) codes can achieve better error-correcting performance than binary LDPC codes when the code length is moderate at the cost of higher decoding complexity. The high complexity is mainly caused by the complicated computations in the check node processing and the large memory requirement. In this paper, a novel check node processing scheme and corresponding VLSI architectures are proposed for the Min-max NB-LDPC decoding algorithm. The proposed scheme first sorts out a limited number of the most reliable variable-to-check (v-to-c) messages, then the check-to-variable (c-to-v) messages to all connected variable nodes are derived independently from the sorted messages without noticeable performance loss. Compared to the previous iterative forward-backward check node processing, the proposed scheme not only significantly reduced the computation complexity, but eliminated the memory required for storing the intermediate messages generated from the forward and backward processes. Inspired by this novel c-to-v message computation method, we propose to store the most reliable v-to-c messages as “compressed” c-to-v messages. The c-to-v messages will be recovered from the compressed format when needed. Accordingly, the memory requirement of the overall decoder can be substantially reduced. Compared to the previous Min-max decoder architecture, the proposed design for a (837, 726) code overGF(25) can achieve the same throughput with only 46% of the area.

IEEE Transactions on Very Large Scale Integration (VLSI) Systems•May 12, 2010•83 citations

Low-Complexity High-Speed Decoder Design for Quasi-Cyclic LDPC Codes

Zhongfeng Wang, Zhiqiang Cui

This paper studies low-complexity high-speed decoder architectures for quasi-cyclic low density parity check (QC-LDPC) codes. Algorithmic transformation and architectural level optimization are incorporated to reduce the critical path. Enhanced partially parallel decoding architectures are proposed to linearly increase the throughput of conventional partially parallel decoders through introducing a small percentage of extra hardware. Based on the proposed architectures, a (8176, 7154) Euclidian geometry-based QC-LDPC code decoder is implemented on Xilinx field programmable gate array (FPGA) Virtex-II 6000, where an efficient nonuniform quantization scheme is employed to reduce the size of memories storing soft messages. FPGA implementation results show that the proposed decoder can achieve a maximum (source data) decoding throughput of 172 Mb/s at 15 iterations

IEEE Transactions on Very Large Scale Integration (VLSI) Systems•Jan 1, 2007•155 citations

A study of the Design of Non-binary LDPC Decoder

Liu Fei, Haitao Li

This paper addresses decoder design for nonbinary quasicyclic LDPC(QC-LDPC) codes based on the extended min-sum(EMS) algorithm.It is necessary to perform quantities of recursive computation among the message vector,and only one single step operations is utilized to complete the check node update,which leads to larger decoder latency.In this paper,the novel non-binary LDPC decoder architecture is proposed to overcome this problem.Based on the rules of forward-backward algorithm,we utilize three single step operations to complete the check node update and optimize the check node update step operation.The hardware resource consumption for check node update increases slightly,but the cycle required is reduced to 1/3 of general decoder structure.The variable node update unit with fully parallel computation is presented without forward-backward,which removes recursive computation among the message vector and is of low complexity and latency.Moreover,an FPGA implementation for a(480,360) nonbinary QC-LDPC code decoder over GF(16) is designed to demonstrate the efficiency of the presented techniques.Simulation results show that the proposed design scheme can triple throughput of the decoder at the cost of less hardware resource consumption.

Signal Processing•Jan 1, 2012•0 citations
Nonbinary low-density parity-check (LDPC) codes are of great interest due to their better performance cover binary ones when the code length is moderate. However, the cost of decoder implementation for these LDPC codes is still very high. In this paper, a low-complexity VLSI architecture for nonbinary LDPC decoders is presented. By exploiting the intrinsic shifting and symmetry properties of nonbinary quasi-cyclic LDPC (QC-LDPC) codes, significant reduction of memory size and routing complexity can be achieved. These unique features lead to two network-efficient decoder architectures for Class-I and Class-II nonbinary QC-LDPC codes, respectively. Comparison results with the state-of-the-art designs show that for the code example of the 64-ary (1260, 630) rate-0.5 Class-I code, the proposed scheme can save up to 70.6% hardware required by switch network, which demonstrates the efficiency of the proposed technique. The proposed design for the 32-ary (992, 496) rate-0.5 Class-II code can achieve a 93.8% switch network complexity reduction compared with conventional approaches. Furthermore, with the help of a generator for possible solution sequences, both forward and backward steps can be eliminated to offer processing convenience of check node unit (CNU) blocks. Results show the proposed 32-ary (992, 496) rate-0.5 Class-II decoder can achieve 4.47 Mb/s decoding throughput at a clock speed of 150 MHz.
This paper presents approaches to develop efficient network for non-binary quasi-cyclic LDPC (QC-LDPC) decoders. By exploiting the intrinsic shifting and symmetry properties of the check matrices, significant reduction of memory size and routing complexity can be achieved. Two different efficient network architectures for Class-I and Class-II non-binary QC-LDPC decoders have been proposed, respectively. Comparison results have shown that for the code of the 64-ary (1260, 630) rate-0.5 Class-I code, the proposed scheme can save more than 70.6% hardware required by shuffle network than the state-of-the-art designs. The proposed decoder example for the 32-ary (992, 496) rate-0.5 Class-II code can achieve a 93.8% shuffle network reduction compared with the conventional ones. Meanwhile, based on the similarity of Class-I and Class-II codes, similar shuffle network is further developed to incorporate both classes of codes at a very low cost.
Non-binary low-density parity check (NB-LDPC) codes are an extension of binary LDPC codes with significantly better performance.Although various kinds of low-complexity iterative decoding algorithms have been proposed, there is a big challenge for VLSI implementation of NBLDPC decoders due to its high complexity and long latency.In this brief, highly efficient check node processing scheme, which the processing delay greatly reduced, including Min-Max decoding algorithm and check node unit are proposed.Compare with previous works, less than 52% could be reduced for the latency of check node unit.In addition, the efficiency of the presented techniques is design to demonstrate for the (620, 310) NB-QC-LDPC decoder.
This paper addresses decoder design for nonbinary quasicyclic low-density parity-check (QC-LDPC) codes. First, a novel decoding algorithm is proposed to eliminate the multiplications over Galois field for check node processing. Then, a partially parallel architecture for check node processing units and an optimized architecture for variable node processing units are developed based on the new decoding algorithm. Thereafter, an efficient decoder structure dedicated to a promising class of high-performance nonbinary QC-LDPC codes is presented for the first time. Moreover, an ASIC implementation for a (620, 310) nonbinary QC-LDPC code decoder over GF(32) is designed to demonstrate the efficiency of the presented techniques.
Non-binary low-density parity-check (NB-LDPC) codes can achieve better error-correcting performance than binary LDPC codes when the code length is moderate at the cost of higher decoding complexity. The high complexity is mainly caused by the complicated computations in the check node processing and the large memory requirement. In this paper, a novel check node processing scheme and corresponding VLSI architectures are proposed for the Min-max NB-LDPC decoding algorithm. The proposed scheme first sorts out a limited number of the most reliable variable-to-check (v-to-c) messages, then the check-to-variable (c-to-v) messages to all connected variable nodes are derived independently from the sorted messages without noticeable performance loss. Compared to the previous iterative forward-backward check node processing, the proposed scheme not only significantly reduced the computation complexity, but eliminated the memory required for storing the intermediate messages generated from the forward and backward processes. Inspired by this novel c-to-v message computation method, we propose to store the most reliable v-to-c messages as “compressed” c-to-v messages. The c-to-v messages will be recovered from the compressed format when needed. Accordingly, the memory requirement of the overall decoder can be substantially reduced. Compared to the previous Min-max decoder architecture, the proposed design for a (837, 726) code overGF(25) can achieve the same throughput with only 46% of the area.
This paper studies low-complexity high-speed decoder architectures for quasi-cyclic low density parity check (QC-LDPC) codes. Algorithmic transformation and architectural level optimization are incorporated to reduce the critical path. Enhanced partially parallel decoding architectures are proposed to linearly increase the throughput of conventional partially parallel decoders through introducing a small percentage of extra hardware. Based on the proposed architectures, a (8176, 7154) Euclidian geometry-based QC-LDPC code decoder is implemented on Xilinx field programmable gate array (FPGA) Virtex-II 6000, where an efficient nonuniform quantization scheme is employed to reduce the size of memories storing soft messages. FPGA implementation results show that the proposed decoder can achieve a maximum (source data) decoding throughput of 172 Mb/s at 15 iterations
This paper addresses decoder design for nonbinary quasicyclic LDPC(QC-LDPC) codes based on the extended min-sum(EMS) algorithm.It is necessary to perform quantities of recursive computation among the message vector,and only one single step operations is utilized to complete the check node update,which leads to larger decoder latency.In this paper,the novel non-binary LDPC decoder architecture is proposed to overcome this problem.Based on the rules of forward-backward algorithm,we utilize three single step operations to complete the check node update and optimize the check node update step operation.The hardware resource consumption for check node update increases slightly,but the cycle required is reduced to 1/3 of general decoder structure.The variable node update unit with fully parallel computation is presented without forward-backward,which removes recursive computation among the message vector and is of low complexity and latency.Moreover,an FPGA implementation for a(480,360) nonbinary QC-LDPC code decoder over GF(16) is designed to demonstrate the efficiency of the presented techniques.Simulation results show that the proposed design scheme can triple throughput of the decoder at the cost of less hardware resource consumption.