Controlling the position of individual quantum dots (QDs) by means of overgrowing a prepatterned substrate is a prospering research topic. In combination with an accurate alignment procedure, single site-controlled quantum dots (SCQDs) can be precisely retrieved after overgrowth and even integrated in optical resonator devices. This is an essential step towards the parallel fabrication of spatial resonant QD-resonator systems that can be used as efficient single photon sources or to study cavity quantum electrodynamics (cQED) effects. In this contribution, cQED-effects of SCQDs into micropillar cavities are demonstrated. In order to demonstrate cQED effects we performed temperature tuning of a single SCQD spectrally located on the high energy side of the fundamental resonator mode with a quality factor of ~1700 and a pillar diameter of 1 mum. It is concluded that the results are promising with respect to the application of site-controlled QDs in quantum light sources.
Controlling the position of individual quantum dots (QDs) by means of overgrowing a prepatterned substrate is a prospering research topic. In combination with an accurate alignment procedure, single site-controlled quantum dots (SCQDs) can be precisely retrieved after overgrowth and even integrated in optical resonator devices. This is an essential step towards the parallel fabrication of spatial resonant QD-resonator systems that can be used as efficient single photon sources or to study cavity quantum electrodynamics (cQED) effects. In this contribution, cQED-effects of SCQDs into micropillar cavities are demonstrated. In order to demonstrate cQED effects we performed temperature tuning of a single SCQD spectrally located on the high energy side of the fundamental resonator mode with a quality factor of ~1700 and a pillar diameter of 1 mum. It is concluded that the results are promising with respect to the application of site-controlled QDs in quantum light sources.
A cavity quantum electrodynamics (cQED) system consisting of a confined single photon and a single quantum emitter serves as a fundamental block for quantum optics and photonic quantum technologies. The canonical optical mode employed in the conventional cavity quantum electrodynamics features a uniform polarization distribution, leading to the scalar light-matter interaction in most existing experiments. Despite the rapid progress in the generation of structured light with spatially varied polarizations, the structured light-matter interaction, especially at the single quanta level, is highly intriguing yet largely unexplored. Here, we present the structured light-matter interaction at the single-photon level in a semiconductor cavity quantum electrodynamics system. Four distinct structured cavity modes that are spectrally close to each other are constructed in a micropillar cavity. By spatially locating a single epitaxial quantum dot (QD) at the periphery of a semiconductor micropillar cavity and spectrally tuning the QD emission wavelength into the resonances of the structured cavity modes, cavity-enhanced single-photon emissions with spin-locked chiral orbital angular momentum (OAM) and engineerable spin-orbit entanglements are achieved within a single wavelength-scale device. Our work opens an unexplored paradigm of structured quantum light-matter interactions and may further advance chiral quantum optics and high-dimensional photonic quantum technology.
Abstract Hybrid quantum interfaces that combine the fast, deterministic single-photon emission of semiconductor quantum dots (QDs) with the long-lived quantum memories of atomic vapors represent a promising route towards scalable quantum networks and distributed quantum computing. However, the realization of such interfaces is fundamentally limited by the stringent spectral matching required between the narrow optical transitions of atomic systems and the intrinsically variable emission of QDs. Moreover, achieving bright QD emission requires integration into an efficient light-collecting structure. In this work, we present a systematic investigation of three tuning mechanisms for cavity-enhanced QDs embedded in micropillar cavities: thermal tuning, in situ laser processing, and nitrogen gas deposition. We experimentally evaluated the applicability of each method and characterized their tuning ranges and precisions. All three methods enable reliable and precise wavelength shifts, even for QDs in larger micropillars. These results provide practical strategies for achieving spectral resonance between QD emitters and atomic vapor lines, paving the way for tunable solid-state-atomic hybrid platforms for photon storage, synchronization, and interfacing in hybrid quantum systems.
The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved
This thesis is devoted to theoretically study the systems of single quantum dots (QDs) embedded in various photonic nanostructures, in close relation with experimental data. The word single is essential: due to their nanometer size, QDs have mainly been studied as ensembles. It is only recently that the experimental progress, in particular in the domain of QDs growth, has allowed to address single QDs. This helped to observe that the confined states in a QD resemble those of an atom, leading in turn to the macro-atom picture for QDs. It opened the path to the study of cavity quantum electrodynamics (CQED) in the solid state, as the analogous of a system of an atom in an electromagnetic cavity. However, already at the level of the QD (i.e. without a solid state cavity), the macro-atom picture has been proven to be oversimplified. Various effects related to the solid state environment of the QD have been experimentally and theoretically evidenced, like the influence of acoustic and optical phonons. These are channels of decoherence for the otherwise well isolated and confined QD levels. When adding the cavity, these effects are possibly enhanced, which can lead to very large deviations from the CQED ideal picture. Therefore the clear understanding of these effects is of essential importance, especially in view of the application of solid state systems to quantum information science. In Chapter 2, we address the radiation-matter coupling between two QDs in a nanocavity. This field of research combines the high quality of light resonators to the nonlinearities of the semiconductor material. It is promising in view of manipulating and transferring single long-lived excitations, an essential goal for quantum information science. Then, we study the deviations of a QD from the idealized macroatom picture. First, in Chapter 3, we include the influence of acoustic phonons on the light emitted by a QD-cavity system. We show that the QD modified susceptibility leads to the qualitative explanation of the cavity feeding effects, which is one of the most striking deviations of the QD-cavity system from the ideal CQED picture. In addition to phonons are extended two-dimensional states populated by the non resonant pumping laser in the QD's wetting layer (WL). In Chapters 4 and 5 we build a Monte-Carlo model of the excitation-decay mechanism in a QD-cavity system. We use it to describe the influence of WL states on the dynamics of the QD, leading in turn to a non-CQED behavior. This approach is particularly successful in the case of large QD-cavity detuning, where it predicts both time-dependent and spectral characteristics of the emitted light. Finally, in Chapter 6, we discuss our conclusions, emphasizing in particular that the knowledge of the actual solid state environment of the QD leads to a better control over the parameters allowing to reach the CQED regime. We also discuss the possible extensions of this work, in particular in relation to the analysis of the stimulated emission regime.
Cavity quantum electrodynamic (cQED) systems have attracted extensive research interest in the past decades as the main driving force of quantum optics. First experimental demonstrations focused on the enhancement of spontaneous emission and optical nonlinearities related to a single quantum emitter confined in a microcavity. Major technological effort was needed to enter the strong coupling regime of single emitter cQED to study for instance the non-harmonicity of resulting Jaynes-Cummings ladder and to perform quantum non-demolition measurements at the heart of quantum optics. Corresponding milestone experiments paved the way towards the realization of a wide variety of non-classical light sources bringing the concept of photonic quantum networks to a practical level. cQED systems can be realized using atomic, superconducting and semiconductor platforms. In view of future applications in the quantum information technology, the solid state platform of microcavities with embedded quantum emitters is the most attractive one as it promises low-cost mass production as well as interoperability with the integrated electronic circuit technology of today. Therefore, quantum dot (QD)-microcavity systems are very attractive for further investigations in this field. Indeed, even though cQED effects have been studied for many years now, there are still fundamental aspects remaining to be explored. One example is the exploration of a strongly coupled cQED system under coherent optical excitation which is one of the primary goals of this work. The work presented in this thesis aims at a deeper understanding of cQED effects in semiconductor based implementations of this central topic of quantum optics. It includes comprehensive spatially-resolved studies of the QD-micropillar system in the both weak and strong coupling regime. For this purpose an advanced 90 degree excitation and detection scheme, suitable for efficient wavelength-independent driving of the coupled exciton (X) and cavity mode (C) system, was implemented. This flexible and powerful technique enables access to the three-dimensional emission characteristics of QD-micropillars providing important new insight into cQED effects which is the central aspect of the first part of this thesis. The performed studies show for instance a pronounced anticorrelation (correlation) of the directional emission characteristics down to the single emitter level in the weak (strong) coupling regime demonstrating directly their fundamentally different nature. Related investigations of the lasing regime present a straightforward characterization method to demonstrate lasing action in high-Beta microlasers without the need for time consuming studies employing photon statistics. The second part of the thesis addresses another very important yet unexplored fundamental aspect of cQED. The main focus is on coherently-driven strongly-coupled QD-microcavity systems. Of particular interest is the regime where the coherent excitation dresses the X-C polariton at high excitation powers. This regime is found at the crossover from a quantum (Jaynes Cummings) to a semi-classical (Mollow Triplet-like) system and can be observed between the limiting cases of an anharmonic and a harmonic ladder solely by varying the excitation strength. An indispensable condition for the first observation of this transitory regime is driving the system through the matter (X) component, which distinguishes this work from previous studies. Counterintuitively, significant cavity losses with respect to the coupling strength are required to create the highly coherent state of the laser-dressed polariton. Moreover, this work pioneers in resonance fluorescence (RF) studies of strongly-coupled QD-microcavity systems and reveals that strong X-C coupling suppresses the RF substantially. Additionally, injection pulling of a single polariton is observed for the first time in the QD-microcavity system, which links this classical effect of injection locking, which is also found in macroscopic lasers, to the quantum regime. Complementary studies on long range off-resonant X-C coupling, mutual coupling of two QD Xs as well as temperature stability of the coherent coupling regime deepen the fundamental understanding of the strong light-matter interaction in semiconductor systems.
Though QD arrays have initially been mostly studied in an attempt to improve semiconductor lasers, much attention has been recently devoted to the revolutionary prospects opened by the unique properties of single QDs. These artificial atoms allow to mimic in solid-state systems some of the quantum optics experiments performed on atoms since the early 80’s. Recent demonstrations of coherent control experiments on QDs illustrate this fruitful analogy [10]. We will focus here our discussion on the impact of QDs on two other fields, solid-state cavity quantum electrodynamics (CQED) and the generation of quantum states of light. A single QD can be used to emit triggered single photon pulses and photon pairs, whereas its narrow emission spectrum permits to implement microcavities very efficiently to tailor its emission properties. By combining both kind of effects, it is possible to control simultaneously the number of emitted photons as well as their quantum state and to build a solid-state singlemode source of single photons (singlemode S4P) as proposed [11] and demonstrated recently by our group [12]. This novel device represents the ultimate step in a field which has been extremely active in the last 15 years, spontaneous emission (SE) control in optoelectronic devices using confined electronic and/or photonic systems [13]. Before reviewing the development of this single mode S4P, based on a single QD in a pillar microcavity, we will briefly discuss its potential applications in the field of quantum information processing and quantum communications (QIPC).