Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Josephson junction array driven by modulated optical combs

Chiharu Urano, Nobu‐Hisa Kaneko, Masaaki Maezawa, Taro Itatani, Shogo Kiryu

Published Jun 1, 2008• 2 citations
Publisher

Abstract

We have performed an experiment to drive an over-damped Josephson junction array (JJA) with modulated current pulse trains, which are generated by a modulated optical comb (an ultra-short pulse laser). The intensities of optical pulse trains are modulated using a pulse pattern generator. We quantitatively verified that the output voltages of the JJA were consistent with the modulation signals.

DOI
10.1109/cpem.2008.4574969

Related papers

Pulse driven Josephson voltage standard using modulated optical comb

Chiharu Urano, Nobu‐Hisa Kaneko, Masaaki Maezawa +2 more

We have performed an experiment to drive an overdamped superconductor-insulator-normal-insulator-superconductor (SINIS) Josephson junction array (JJA) with modulated current pulse trains, which are generated by modulated ultra short optical pulses. Averaged voltage outputs of the JJA have been systematically measured for various modulation patterns as a function of the bias voltage of an optical modulator. Quantized voltage steps has been clearly observed in accordance with modulation patterns under certain condition of the bias voltage of the optical modulator.

Journal of Physics Conference Series•Feb 1, 2008•7 citations

A new coding technique in serial data transmission and demodulation with Josephson junctions array

Chiharu Urano, Michitaka Maruyama, Nobu‐Hisa Kaneko +9 more

We have developed a coding technique to drive an overdamped Josephson junction array (JJA) using modulated optical pulses for voltage standard applications. Our system is composed of a multi-channel pulse pattern generator (PPG), a LiNbO 3 (LN) modulator with an electrical multiplexer (MUX), a photodiode (PD), and an over-damped JJA cooled with 4 K GM cryocooler. The modulated optical pulses are transmitted via an optical fiber to a PD that is installed close to the JJA on a cold stage, and they are then converted into an electrical current pulse train in order to drive the JJA. To avoid a problem in our LN modulator system, i.e., the duty-ratio dependence of the output pulse waveform, pseudo signals that maintain the duty ratio at approximately 50% are inserted in the original bit stream. We demonstraited that this technique is applicable for arbitrary return-to-zero (RZ) binary bit streams.

Journal of Physics Conference Series•Jun 1, 2010•6 citations

Operation of Josephson Junctions With Current Pulses Generated by Triggering a Cold Photo Detector With an Optical Comb

Chiharu Urano, Nobu‐Hisa Kaneko, Masaaki Maezawa +5 more

We report the experimental results on a Josephson junction array (JJA) driven by current pulse trains generated by triggering a photo detector located in a cryostat with an optical comb. The key components in the experimental system are a mode locked fiber laser, a metal-semiconductor-metal (MSM) photoconductive switch, and an overdamped JJA. Optical pulse trains generated at room temperature are transmitted via an optical fiber to the MSM-photo detector installed at 4.2 K, and then converted into electric current pulse trains to drive the overdamped JJA. Quantized voltage steps have been verified at multiples of 10 muV, which agrees with the repetition rate of the pulse laser and the number of Josephson junctions in the JJA.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•8 citations

Driving a Josephson Junction Array with a Mode-Locked Laser and a Photodiode

J. Nissilä, Thomas Fordell, Oliver Kieler +1 more

This paper describes development of a new technique to drive Josephson junction arrays (JJA). We have designed and built an optical pulse generator (up to 12 GHz pulse rate) based on a mode-locked laser to feed an ultra-fast photodiode which again can drive current pulses to a JJA. Our preliminary experiments show that precise direct current (dc) voltages can be realized with a JJA with 5000 junctions. The work ultimately aims at development of an arbitrary pulse pattern generator allowing generation of precise arbitrary voltage waveforms.

Conference on Precision Electromagnetic Measurements•Jul 1, 2018•3 citations

Driving a low critical current Josephson junction array with a mode-locked laser

J. Nissilä, Fordell, Thomas, Katja Kohopää +11 more

We report proof-of-concept experiments on an optically driven Josephson voltage standard based on a mode-locked laser (MLL), a time-division multiplexer, and a cryogenic ultrafast photodiode driving an overdamped Josephson junction array (JJA). Our optical pulse pattern generator (PPG) concept builds on the capability of MLLs to produce trains of picosecond-wide optical pulses with little amplitude and temporal spread. Our present setup enables multiplication of the original 2.3 GHz pulse repetition frequency by a factor of 8. A commercial photodiode converts the optical pulses into about 25 ps wide electrical pulses in liquid helium several cm from the JJA. Using a custom-made MLL, we can drive a JJA with a low critical current of 360 μA at multiple Shapiro steps. We have performed experiments with pulse pairs whose time interval can be set freely without distorting the shapes of individual pulses. Experimental results are in qualitative agreement with theoretical simulations, and they demonstrate, e.g., crossover in the Shapiro step pattern when the time interval between the pulses is approximately equal to the inverse of the characteristic frequency of the JJA. However, there are quantitative discrepancies, which motivate an improved integration of photodiodes and JJAs to improve both the understanding and fidelity of Josephson Arbitrary Waveform Synthesizers. Considering future quantum technologies in a wider perspective, our optical approach is a potential enabler for fast and energy-efficient pulse drive without an expensive high-bandwidth electrical PPG and without high-bandwidth electrical cables that yield too high thermal conductance between cryogenic and room temperatures.

•Jan 1, 2021•12 citations

Driving a low critical current Josephson junction array with a mode-locked laser

J. Nissilä, T. Fordell, K. Kohopää +11 more

We report proof-of-concept experiments on an optically driven Josephson voltage standard based on a mode-locked laser (MLL), a time-division multiplexer, and a cryogenic ultrafast photodiode driving an overdamped Josephson junction array (JJA). Our optical pulse pattern generator (PPG) concept builds on the capability of MLLs to produce trains of picosecond-wide optical pulses with little amplitude and temporal spread. Our present setup enables multiplication of the original 2.3 GHz pulse repetition frequency by a factor of 8. A commercial photodiode converts the optical pulses into about 25 ps wide electrical pulses in liquid helium several cm from the JJA. Using a custom-made MLL, we can drive a JJA with a low critical current of 360 μA at multiple Shapiro steps. We have performed experiments with pulse pairs whose time interval can be set freely without distorting the shapes of individual pulses. Experimental results are in qualitative agreement with theoretical simulations, and they demonstrate, e.g., crossover in the Shapiro step pattern when the time interval between the pulses is approximately equal to the inverse of the characteristic frequency of the JJA. However, there are quantitative discrepancies, which motivate an improved integration of photodiodes and JJAs to improve both the understanding and fidelity of Josephson Arbitrary Waveform Synthesizers. Considering future quantum technologies in a wider perspective, our optical approach is a potential enabler for fast and energy-efficient pulse drive without an expensive high-bandwidth electrical PPG and without high-bandwidth electrical cables that yield too high thermal conductance between cryogenic and room temperatures.

arXiv:2009.12352•Applied Physics Letters•Jul 19, 2021•14 citations
We have performed an experiment to drive an over-damped Josephson junction array (JJA) with modulated current pulse trains, which are generated by a modulated optical comb (an ultra-short pulse laser). The intensities of optical pulse trains are modulated using a pulse pattern generator. We quantitatively verified that the output voltages of the JJA were consistent with the modulation signals.
We have performed an experiment to drive an overdamped superconductor-insulator-normal-insulator-superconductor (SINIS) Josephson junction array (JJA) with modulated current pulse trains, which are generated by modulated ultra short optical pulses. Averaged voltage outputs of the JJA have been systematically measured for various modulation patterns as a function of the bias voltage of an optical modulator. Quantized voltage steps has been clearly observed in accordance with modulation patterns under certain condition of the bias voltage of the optical modulator.
We have developed a coding technique to drive an overdamped Josephson junction array (JJA) using modulated optical pulses for voltage standard applications. Our system is composed of a multi-channel pulse pattern generator (PPG), a LiNbO 3 (LN) modulator with an electrical multiplexer (MUX), a photodiode (PD), and an over-damped JJA cooled with 4 K GM cryocooler. The modulated optical pulses are transmitted via an optical fiber to a PD that is installed close to the JJA on a cold stage, and they are then converted into an electrical current pulse train in order to drive the JJA. To avoid a problem in our LN modulator system, i.e., the duty-ratio dependence of the output pulse waveform, pseudo signals that maintain the duty ratio at approximately 50% are inserted in the original bit stream. We demonstraited that this technique is applicable for arbitrary return-to-zero (RZ) binary bit streams.
We report the experimental results on a Josephson junction array (JJA) driven by current pulse trains generated by triggering a photo detector located in a cryostat with an optical comb. The key components in the experimental system are a mode locked fiber laser, a metal-semiconductor-metal (MSM) photoconductive switch, and an overdamped JJA. Optical pulse trains generated at room temperature are transmitted via an optical fiber to the MSM-photo detector installed at 4.2 K, and then converted into electric current pulse trains to drive the overdamped JJA. Quantized voltage steps have been verified at multiples of 10 muV, which agrees with the repetition rate of the pulse laser and the number of Josephson junctions in the JJA.
This paper describes development of a new technique to drive Josephson junction arrays (JJA). We have designed and built an optical pulse generator (up to 12 GHz pulse rate) based on a mode-locked laser to feed an ultra-fast photodiode which again can drive current pulses to a JJA. Our preliminary experiments show that precise direct current (dc) voltages can be realized with a JJA with 5000 junctions. The work ultimately aims at development of an arbitrary pulse pattern generator allowing generation of precise arbitrary voltage waveforms.
We report proof-of-concept experiments on an optically driven Josephson voltage standard based on a mode-locked laser (MLL), a time-division multiplexer, and a cryogenic ultrafast photodiode driving an overdamped Josephson junction array (JJA). Our optical pulse pattern generator (PPG) concept builds on the capability of MLLs to produce trains of picosecond-wide optical pulses with little amplitude and temporal spread. Our present setup enables multiplication of the original 2.3 GHz pulse repetition frequency by a factor of 8. A commercial photodiode converts the optical pulses into about 25 ps wide electrical pulses in liquid helium several cm from the JJA. Using a custom-made MLL, we can drive a JJA with a low critical current of 360 μA at multiple Shapiro steps. We have performed experiments with pulse pairs whose time interval can be set freely without distorting the shapes of individual pulses. Experimental results are in qualitative agreement with theoretical simulations, and they demonstrate, e.g., crossover in the Shapiro step pattern when the time interval between the pulses is approximately equal to the inverse of the characteristic frequency of the JJA. However, there are quantitative discrepancies, which motivate an improved integration of photodiodes and JJAs to improve both the understanding and fidelity of Josephson Arbitrary Waveform Synthesizers. Considering future quantum technologies in a wider perspective, our optical approach is a potential enabler for fast and energy-efficient pulse drive without an expensive high-bandwidth electrical PPG and without high-bandwidth electrical cables that yield too high thermal conductance between cryogenic and room temperatures.
We report proof-of-concept experiments on an optically driven Josephson voltage standard based on a mode-locked laser (MLL), a time-division multiplexer, and a cryogenic ultrafast photodiode driving an overdamped Josephson junction array (JJA). Our optical pulse pattern generator (PPG) concept builds on the capability of MLLs to produce trains of picosecond-wide optical pulses with little amplitude and temporal spread. Our present setup enables multiplication of the original 2.3 GHz pulse repetition frequency by a factor of 8. A commercial photodiode converts the optical pulses into about 25 ps wide electrical pulses in liquid helium several cm from the JJA. Using a custom-made MLL, we can drive a JJA with a low critical current of 360 μA at multiple Shapiro steps. We have performed experiments with pulse pairs whose time interval can be set freely without distorting the shapes of individual pulses. Experimental results are in qualitative agreement with theoretical simulations, and they demonstrate, e.g., crossover in the Shapiro step pattern when the time interval between the pulses is approximately equal to the inverse of the characteristic frequency of the JJA. However, there are quantitative discrepancies, which motivate an improved integration of photodiodes and JJAs to improve both the understanding and fidelity of Josephson Arbitrary Waveform Synthesizers. Considering future quantum technologies in a wider perspective, our optical approach is a potential enabler for fast and energy-efficient pulse drive without an expensive high-bandwidth electrical PPG and without high-bandwidth electrical cables that yield too high thermal conductance between cryogenic and room temperatures.