Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cross Strait Quad-Regional Radio Science and Wireless Technology Conference (CSQRWC)

An early stopping criterion for LDPC decoding based on average weighted reliability measure

Tso-Cho Chen

Published Jul 1, 2012• 2 citations
Publisher

Abstract

An early stopping criterion for low-density parity-check decoding is proposed to reduce the number of decoding iterations. The proposed early stopping criterion is based on the average weighted reliability measure of the hard output of decoder to detect undecodable blocks in an early stage of the decoding process. Simulation results show that the proposed algorithm can achieve about 0.2–0.4 dB coding gain improvement on average while reducing up to about 50%–85% iteration for decoding at low to medium Eb/N0, compared with the existing method.

DOI
10.1109/csqrwc.2012.6294956

Related papers

A Weighted Belief Propagation Decoding Algorithm of LDPC Codes for Fast Convergence and Early Stopping

Tso-Cho Chen

A weighted belief propagation decoding algorithm for low-density parity-check decoding is proposed to accelerate the convergence of decoding and reduce the number of decoding iterations. We propose an early stopping criterion which is based on the average weighted reliability measure of the hard output of decoder to detect undecodable blocks in an early stage of the decoding process. In addition, an adaptive weighted iteration scheme is proposed to increase the convergence speed of belief propagation (BP) decoding and therefore improve the error performance. The evolution of the adaptive weighting factor with the number of decoding iterations is based on the relative entropy between two consecutive ”a posteriori” probabilities distribution at decoder output. Simulation results show that the proposed algorithm can achieve about 0.2-0.4 dB coding gain improvement on average while reducing up to about 50%-85% iterations for decoding at low to medium E(subscript b)/ N(subscript 0) , compared with the conventional BP based algorithms.

•Jul 1, 2012•0 citations

Low Complexity Stopping Criterion for LDPC Code Decoders

Frank Kienle, Norbert Wehn

Low density parity check (LDPC) codes are amongst the most powerful codes known today. They are decoded iteratively by a message-passing algorithm. For this, an inherent stopping criterion exists for decodable blocks based on parity checks. For undecodable blocks, typically, a fixed number of iterations are carried out before the decoding procedure is terminated, which is a waste of energy and time. We present a stopping criterion which detects undecodable blocks in an early stage of the decoding process. The novel stopping criterion works for floating and fixed point implementations. It greatly reduces the average number of required iterations without any loss in communication performance.

IEEE Vehicular Technology Conference•Dec 10, 2005•67 citations

An efficient early stopping analog decoder for LDPC codes

Yuan Gao, Yujie Lin, Bowen Zeng +2 more

The analog implementation of error control decoders is a competitive methodology compared with the digital implementation in power efficiency and throughput. In order to detect uncorrectable frames and early stop the iterative decoding of low-density parity check (LDPC) analog decoders, a probability stopping block using probabilities of satisfied checks is proposed. Simulation results show that the proposed criterion can greatly reduce the average number of iterations at low SNR, and has better tradeoff between complexity and performance than other stopping criteria using extrinsic information.

International Conference on Computer Science and Network Technology (ICCSNT)•Dec 1, 2015•1 citation

A new stopping criterion for fast low-density parity-check decoders

Tian Xia, Hsiao‐Chun Wu, Scott C-H Huang

Nonbiliary low-density parity-check (LDPC) codes can lead to excellent error performance while the codewords are of short or moderate length. However, the high decoding complexity of nonbiliary LDPC codes inevitably depreciates their practical values. The computational bottleneck arises from the check node processing in the iterative message passing (MP) algorithms which terminate when either all parity checks are satisfied or the maximum iteration number is reached. We have observed that for undecodable blocks, the MP algorithms always run up to the maximum iteration limit and therefore cannot generate the correct codeword. Thus, it would be better to terminate the algorithms early so as to save the unnecessary computational time and reduce the extra power consumption when undecodable blocks are experienced. In this paper, we propose a new T-tolerance stopping criterion for LDPC decoders by exploiting the fact that the total a posteriori probability (APP) should increase as the iteration number grows. Simulation results demonstrate that our proposed new T-tolerance criterion can greatly reduce the average iteration number (complexity) while restricting the decoding performance degradation within 0.1 dB in low bit-energy-to-noise ratio scenarios.

Globecom•Dec 1, 2013•6 citations

New Stopping Criterion for Fast Low-Density Parity-Check Decoders

Tian Xia, Hsiao‐Chun Wu, Hong Jiang

Low-density parity-check (LDPC) codes are favorable in low bit-error-rate and high code-rate applications. However, the decoding complexity for LDPC codes is quite large, especially for nonbinary LDPC codes. In this paper, we propose a new T-tolerance stopping criterion for LDPC decoders by exploiting the fact that the total aposteriori probability (APP) should increase across iterations when message passing (MP) algorithms are employed. Simulation results demonstrate that our proposed new T-tolerance criterion can greatly reduce the average iteration number (complexity) while the decoding performance degradation is controlled within 0.1 dB in the low bit-energy-to-noise-spectral-density ratio (Eb/N0) scenarios.

IEEE Communications Letters•Aug 21, 2014•15 citations

Early stopping for LDPC decoding: convergence of mean magnitude (CMM)

Jin Li, Xiaohu You, Jing Li

A new early stopping criterion is proposed for low density parity check (LDPC) codes to reduce the number of decoding iterations while preserving a good decoding performance. The new criterion is based on the convergence of the mean magnitude (CMM) of the log-likelihood ratio messages at the output of each decoding iteration. Information-theoretic support and extensive simulations are provided to demonstrate the efficiency of the criterion

IEEE Communications Letters•Sep 1, 2006•67 citations
An early stopping criterion for low-density parity-check decoding is proposed to reduce the number of decoding iterations. The proposed early stopping criterion is based on the average weighted reliability measure of the hard output of decoder to detect undecodable blocks in an early stage of the decoding process. Simulation results show that the proposed algorithm can achieve about 0.2–0.4 dB coding gain improvement on average while reducing up to about 50%–85% iteration for decoding at low to medium Eb/N0, compared with the existing method.
A weighted belief propagation decoding algorithm for low-density parity-check decoding is proposed to accelerate the convergence of decoding and reduce the number of decoding iterations. We propose an early stopping criterion which is based on the average weighted reliability measure of the hard output of decoder to detect undecodable blocks in an early stage of the decoding process. In addition, an adaptive weighted iteration scheme is proposed to increase the convergence speed of belief propagation (BP) decoding and therefore improve the error performance. The evolution of the adaptive weighting factor with the number of decoding iterations is based on the relative entropy between two consecutive ”a posteriori” probabilities distribution at decoder output. Simulation results show that the proposed algorithm can achieve about 0.2-0.4 dB coding gain improvement on average while reducing up to about 50%-85% iterations for decoding at low to medium E(subscript b)/ N(subscript 0) , compared with the conventional BP based algorithms.
Low density parity check (LDPC) codes are amongst the most powerful codes known today. They are decoded iteratively by a message-passing algorithm. For this, an inherent stopping criterion exists for decodable blocks based on parity checks. For undecodable blocks, typically, a fixed number of iterations are carried out before the decoding procedure is terminated, which is a waste of energy and time. We present a stopping criterion which detects undecodable blocks in an early stage of the decoding process. The novel stopping criterion works for floating and fixed point implementations. It greatly reduces the average number of required iterations without any loss in communication performance.
The analog implementation of error control decoders is a competitive methodology compared with the digital implementation in power efficiency and throughput. In order to detect uncorrectable frames and early stop the iterative decoding of low-density parity check (LDPC) analog decoders, a probability stopping block using probabilities of satisfied checks is proposed. Simulation results show that the proposed criterion can greatly reduce the average number of iterations at low SNR, and has better tradeoff between complexity and performance than other stopping criteria using extrinsic information.
Nonbiliary low-density parity-check (LDPC) codes can lead to excellent error performance while the codewords are of short or moderate length. However, the high decoding complexity of nonbiliary LDPC codes inevitably depreciates their practical values. The computational bottleneck arises from the check node processing in the iterative message passing (MP) algorithms which terminate when either all parity checks are satisfied or the maximum iteration number is reached. We have observed that for undecodable blocks, the MP algorithms always run up to the maximum iteration limit and therefore cannot generate the correct codeword. Thus, it would be better to terminate the algorithms early so as to save the unnecessary computational time and reduce the extra power consumption when undecodable blocks are experienced. In this paper, we propose a new T-tolerance stopping criterion for LDPC decoders by exploiting the fact that the total a posteriori probability (APP) should increase as the iteration number grows. Simulation results demonstrate that our proposed new T-tolerance criterion can greatly reduce the average iteration number (complexity) while restricting the decoding performance degradation within 0.1 dB in low bit-energy-to-noise ratio scenarios.
Low-density parity-check (LDPC) codes are favorable in low bit-error-rate and high code-rate applications. However, the decoding complexity for LDPC codes is quite large, especially for nonbinary LDPC codes. In this paper, we propose a new T-tolerance stopping criterion for LDPC decoders by exploiting the fact that the total aposteriori probability (APP) should increase across iterations when message passing (MP) algorithms are employed. Simulation results demonstrate that our proposed new T-tolerance criterion can greatly reduce the average iteration number (complexity) while the decoding performance degradation is controlled within 0.1 dB in the low bit-energy-to-noise-spectral-density ratio (Eb/N0) scenarios.