Cyclic liftings are proposed to lower the error floor of low-density parity-check (LDPC) codes. The liftings are designed to eliminate dominant trapping sets of the base code by removing the short cycles which form the trapping sets. We derive a necessary and sufficient condition for the cyclic permutations assigned to the edges of a cycle $c$ of length $\ell(c)$ in the base graph such that the inverse image of $c$ in the lifted graph consists of only cycles of length strictly larger than $\ell(c)$ . The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions, encoder and decoder structure, and in some cases, the code rate. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.Cyclic liftings are proposed to lower the error floor of low-density parity-check (LDPC) codes. The liftings are designed to eliminate dominant trapping sets of the base code by removing the short cycles which form the trapping sets. We derive a necessary and sufficient condition for the cyclic permutations assigned to the edges of a cycle $c$ of length $\ell(c)$ in the base graph such that the inverse image of $c$ in the lifted graph consists of only cycles of length strictly larger than $\ell(c)$. The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions, encoder and decoder structure, and in some cases, the code rate. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.

arXiv:1002.4311Feb 23, 20100 citations

Lowering the error floor of LDPC codes using cyclic liftings

Reza Asvadi, Amir H. Banihashemi, Mahmoud Ahmadian‐Attari

Cyclic liftings are proposed to lower the error floor of low-density parity-check (LDPC) codes. The liftings are designed to eliminate dominant trapping sets of the base code by removing the short cycles which form the trapping sets. We derive a necessary and sufficient condition for the cyclic permutations assigned to the edges of a cycle c of length ℓ(c) in the base graph such that the inverse image of c in the lifted graph consists of only cycles of length strictly larger than ℓ(c). The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.Cyclic liftings are proposed to lower the error floor of low-density parity-check (LDPC) codes. The liftings are designed to eliminate dominant trapping sets of the base code by removing the short cycles which form the trapping sets. We derive a necessary and sufficient condition for the cyclic permutations assigned to the edges of a cycle c of length ℓ(c) in the base graph such that the inverse image of c in the lifted graph consists of only cycles of length strictly larger than ℓ(c). The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.

IEEE International Symposium on Information Theory (ISIT)Jun 1, 201013 citations

Design of Finite-Length Irregular Protograph Codes with Low Error Floors over the Binary-Input AWGN Channel Using Cyclic Liftings

Reza Asvadi, Amir H. Banihashemi, Mahmoud Ahmadian‐Attari

We propose a technique to design finite-length irregular low-density parity-check (LDPC) codes over the binary-input additive white Gaussian noise (AWGN) channel with good performance in both the waterfall and the error floor region. The design process starts from a protograph which embodies a desirable degree distribution. This protograph is then lifted cyclically to a certain block length of interest. The lift is designed carefully to maximize the components of the approximate cycle extrinsic message degree (ACE) spectrum of the code's Tanner graph in a greedy fashion. As a consequence, the designed code would perform well in the error floor region. Moreover, the proposed construction results in quasi-cyclic codes which are attractive in practice due to simple encoder and decoder implementation. Simulation results are provided to demonstrate the effectiveness of the proposed construction in comparison with similar existing constructions.We propose a technique to design finite-length irregular low-density parity-check (LDPC) codes over the binary-input additive white Gaussian noise (AWGN) channel with good performance in both the waterfall and the error floor region. The design process starts from a protograph which embodies a desirable degree distribution. This protograph is then lifted cyclically to a certain block length of interest. The lift is designed carefully to maximize the components of the approximate cycle extrinsic message degree (ACE) spectrum of the code's Tanner graph in a greedy fashion. As a consequence, the designed code would perform well in the error floor region. Moreover, the proposed construction results in quasi-cyclic codes which are attractive in practice due to simple encoder and decoder implementation. Simulation results are provided to demonstrate the effectiveness of the proposed construction in comparison with similar existing constructions.

arXiv:1102.0424IEEE Transactions on CommunicationsMar 13, 201224 citations

On the Construction of LDPC Codes Free of Small Trapping Sets by Controlling Cycles

Xiongfei Tao, Yufei Li, Yonghe Liu +1 more

Low-density parity-check (LDPC) codes exhibit excellent error correcting capability. However, small trapping sets in the Tanner graph are harmful to the iterative decoding algorithm. In this letter, we present a method of constructing (3, n) girth-eight quasi-cyclic LDPC codes with low error floor by removing the small trapping sets from the Tanner graph. To address this issue, we analyze the relationship between eight-cycles and small trapping sets of Tanner graphs based on fully connected base graphs without parallel edges. We find that if some eight-cycles are not found in the Tanner graphs, any elementary trapping set in the range of a ≤ 8 and b ≤ 3 is removed naturally. We also derive a lower bound on the permutation size for the construction of such codes. The experimental simulation shows a favorable error rate performance with lower error floor over additive white Gaussian noise channels.Low-density parity-check (LDPC) codes exhibit excellent error correcting capability. However, small trapping sets in the Tanner graph are harmful to the iterative decoding algorithm. In this letter, we present a method of constructing (3, n) girth-eight quasi-cyclic LDPC codes with low error floor by removing the small trapping sets from the Tanner graph. To address this issue, we analyze the relationship between eight-cycles and small trapping sets of Tanner graphs based on fully connected base graphs without parallel edges. We find that if some eight-cycles are not found in the Tanner graphs, any elementary trapping set in the range of a ≤ 8 and b ≤ 3 is removed naturally. We also derive a lower bound on the permutation size for the construction of such codes. The experimental simulation shows a favorable error rate performance with lower error floor over additive white Gaussian noise channels.

IEEE Communications LettersMar 8, 201730 citations

Design of irregular quasi-cyclic protograph codes with low error floors

Reza Asvadi, Amir H. Banihashemi, Mahmoud Ahmadian‐Attari

We propose a technique to design finite-length irregular low-density parity-check (LDPC) codes over the binary-input additive white Gaussian noise (AWGN) channel with good performance in both the waterfall and the error floor region. The design process starts from a protograph which embodies a desirable degree distribution. This protograph is then lifted cyclically to a certain block length of interest. The lift is designed carefully to satisfy a certain approximate cycle extrinsic message degree (ACE) spectrum. The target ACE spectrum is one with extremal properties, implying a good error floor performance for the designed code. The proposed construction results in quasi-cyclic codes which are attractive in practice due to simple encoder and decoder implementation. Simulation results are provided to demonstrate the effectiveness of the proposed construction in comparison with similar existing constructions.We propose a technique to design finite-length irregular low-density parity-check (LDPC) codes over the binary-input additive white Gaussian noise (AWGN) channel with good performance in both the waterfall and the error floor region. The design process starts from a protograph which embodies a desirable degree distribution. This protograph is then lifted cyclically to a certain block length of interest. The lift is designed carefully to satisfy a certain approximate cycle extrinsic message degree (ACE) spectrum. The target ACE spectrum is one with extremal properties, implying a good error floor performance for the designed code. The proposed construction results in quasi-cyclic codes which are attractive in practice due to simple encoder and decoder implementation. Simulation results are provided to demonstrate the effectiveness of the proposed construction in comparison with similar existing constructions.

IEEE International Symposium on Information Theory (ISIT)Jul 1, 20117 citations

Designing LDPC Codes without small trapping sets by using Tanner Graph Covers

Miloš Ivković, Shashi Kiran Chilappagari, Bane V. Vasic

We present a method for lowering the error floor of low-density parity check (LDPC) codes. It is based on Tanner graph covers that do not have trapping sets from the original code. The advantages of the method are that it is universal, as it can be applied to any LDPC code/channel model/decoding algorithm and it improves performance at the expense of increasing the code length, without losing the code regularity, without changing the decoding algorithm, and, under certain conditions, without lowering the code rate. We illustrate the method by modifying Tanner, MacKay and Margulis codes to improve performance on the binary symmetric channel (BSC) under the Gallager B decoding algorithm.We present a method for lowering the error floor of low-density parity check (LDPC) codes. It is based on Tanner graph covers that do not have trapping sets from the original code. The advantages of the method are that it is universal, as it can be applied to any LDPC code/channel model/decoding algorithm and it improves performance at the expense of increasing the code length, without losing the code regularity, without changing the decoding algorithm, and, under certain conditions, without lowering the code rate. We illustrate the method by modifying Tanner, MacKay and Margulis codes to improve performance on the binary symmetric channel (BSC) under the Gallager B decoding algorithm.

IEEE International Symposium on Information Theory (ISIT)Jun 1, 20075 citations

c

of length

\ell(c)

in the base graph such that the inverse image of

c

in the lifted graph consists of only cycles of length strictly larger than

\ell(c)

. The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions, encoder and decoder structure, and in some cases, the code rate. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.