© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

IEE Proceedings - Circuits Devices and Systems

Sub and superluminal propagation through stratified media

V. S. C. Manga Rao, S. Dutta Gupta

Published Jan 1, 2005• 2 citations

Abstract

Pulse propagation through 1-dimensional stratified media is studied. The general features of pulse propagation in relation to the delay or advancement of the pulse are discussed. It is shown that in a lossless system with spatial symmetry the reflected and the transmitted pulses have the same delay or advancement. The phase times and the explicit output pulse profiles for an input Gaussian pulse are calculated. While recalling recent results for a variety of systems (resonant absorbers or heterogeneous medium in a Fabry-Perot cavity, a slab of negative index medium, a left-handed/right-handed periodic structure, etc.), new results involving coupled waveguides and a high finesse cavity containing an electromagnetically induced transparency (EIT) medium are presented. Calculations clearly show that for pulses with a carrier tuned at the resonance of the stratified media, one generally has subluminal propagation. Alternatively, in stop gaps or away from the resonances one ends up with superluminal transit. In the case of the EIT cavity it is shown that the large dispersion offered by the intracavity medium can lead to substantial superluminality (ng≃−106) with peak transmission as high as 20%. This is in sharp contrast to large signal attenuation for usual superluminal transit. Note also that EIT, to the best of the authors knowledge, has so far been used to achieve only slow light.

DOI: 10.1049/ip-cds:20045044

Related papers

A common model for superluminal propagation in absorbing atomic media and lossy metastructures

Pedro Chamorro‐Posada, Francisco Javier Fraile-Pelaez

We analyse the superluminal propagation of narrow-band pulses at resonances in dissipative media. The output waveform is an attenuated, undistorted, time-advanced version of the input which can be interpreted as the result of the interference of two scaled replicas of the input having a positive relative delay. The proposed analysis applies both to the propagation in a passive bulk medium at an electronic resonance and in a dielectric waveguide coupled to a lossy micro-ring resonator. This latter case provides a clear insight of the underlying physical phenomena.

arXiv:0805.4240•May 28, 2008•1 citation

Control of superluminal transit through a heterogeneous medium

M. Kulkarni, N. Seshadri, V. S. C. Manga Rao +1 more

We consider pulse propagation through a two component composite medium (metal inclusions in a dielectric host) with or without cavity mirrors. We show that a very thin slab of such a medium, under conditions of localized plasmon resonance, can lead to significant superluminality with detectable levels of the transmitted pulse. A cavity containing the heterogeneous medium is shown to lead to subluminal-to-superluminal transmission depending on the volume fraction of the metal inclusions. The predictions of the phase time calculations are verified by explicit calculations of the transmitted pulse shapes. We also demonstrate the independence of phase time on system width and the volume fraction under specific conditions.

arXiv:0711.4159•Journal of Modern Optics•Mar 1, 2004•10 citations

Luminal pulse velocity in a superluminal medium

Heisuke Amano, Makoto Tomita

To investigate the physical meaning of pulse peak in fast and slow light media, we investigated propagation of differently shaped pulses experimentally, controlling the sharpness of the pulse peak. Symmetric behavior with respect to fast and slow light was observed in traditional Gaussian pulses; that is, propagated pulses were advanced or delayed, respectively, whereas the pulse shape remained unchanged. This symmetry broke down when the pulse peak was sharpened; in the fast light medium, the sharp pulse peak propagated with luminal velocity, and the transmitted pulse deformed into a characteristic asymmetric profile. In contrast, in the slow light medium, a time-delayed smooth peak appeared with a bending point at $t=0$. This symmetry breaking with respect to fast and slow light is a universal characteristic of pulse propagation in causal dispersive systems. The sharp pulse peak can be recognized as a bending nonanalytical point and may be capable of transferring information.

Physical Review A•Dec 23, 2015•2 citations

Time-frequency dynamics of superluminal pulse transition to the subluminal regime

Ahmed H. Dorrah, Abhinav Ramakrishnan, Mo Mojahedi

Spectral reshaping and nonuniform phase delay associated with an electromagnetic pulse propagating in a temporally dispersive medium may lead to interesting observations in which the group velocity becomes superluminal or even negative. In such cases, the finite bandwidth of the superluminal region implies the inevitable existence of a cutoff distance beyond which a superluminal pulse becomes subluminal. In this paper, we derive a closed-form analytic expression to estimate this cutoff distance in abnormal dispersive media with gain. Moreover, the method of steepest descent is used to track the time-frequency dynamics associated with the evolution of the center of mass of a superluminal pulse to the subluminal regime. This evolution takes place at longer propagation depths as a result of the subluminal components affecting the behavior of the pulse. Finally, the analysis presents the fundamental limitations of superluminal propagation in light of factors such as the medium depth, pulse width, and the medium dispersion strength.

Physical Review E•Mar 24, 2015•7 citations

Pulse propagation through a dispersive intracavity medium

H. Yum, Youngjoon Jang, M. S. Shahriar

In this paper, we study theoretically the behavior of a pulse as it propagates through an intracavity fast-light medium. The method of using a transfer function to determine a pulse after it passes through a cavity is well known. However, this approach cannot be used to determine the behavior of the pulse inside the cavity. To circumvent this constraint, we use an approach that starts by finding a self-consistent solution for a monochromatic field of infinite spatial and temporal extents, and determine its amplitudes before, inside, and after the cavity. We then construct a Gaussian input pulse by adding a set of these waves, properly phased and weighted, to represent a moving pulse before the cavity. Adding these waves at various time intervals then yields the complete spatial profile everywhere, including before, inside and after the cavity. We first confirm the prediction of this model by analyzing the behavior of a pulse passing through an empty cavity, and comparing the prediction of the output with the one produced by the transfer function method. We then apply the technique to a cavity containing a fast-light medium. The resulting model allows us to visualize the behavior of the pulse as it propagates superluminally inside the cavity, and interferes with itself through multiple bounces. For a vanishing group index, an interference pattern is formed immediately after the pulse enters the cavity, with an output pulse emerging with no time delay or distortion. The results obtained here illustrates the physical mechanism behind pulse propagation through a white light cavity, a process we have proposed earlier for realizing a high bandwidth, long delay data buffering system

arXiv:1012.4483•Dec 20, 2010•1 citation

Superluminal pulse propagation through one-dimensional photonic crystals with a dispersive defect

Nian-hua Liu, Shi-Yao Zhu, Hong Chen +1 more

The propagation of a pulse through one-dimensional photonic crystals that contain a dispersive and absorptive defect layer doped with two-level atoms is discussed. The dynamical evolution of the pulse inside the photonic crystal is presented. Superluminal negative group velocity (the peak appears at the exit end before it reaches the input end) is discovered. Although the group velocity is larger than c and even negative, the velocity of energy propagation never exceeds the vacuum light speed. The appearance of the superluminal advance or subluminal delay of the pulse peak inside the photonic crystal or at the exit end is due to the wave interference from Bragg reflections.

Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics•Mar 25, 2002•170 citations

Pulse propagation through 1-dimensional stratified media is studied. The general features of pulse propagation in relation to the delay or advancement of the pulse are discussed. It is shown that in a lossless system with spatial symmetry the reflected and the transmitted pulses have the same delay or advancement. The phase times and the explicit output pulse profiles for an input Gaussian pulse are calculated. While recalling recent results for a variety of systems (resonant absorbers or heterogeneous medium in a Fabry-Perot cavity, a slab of negative index medium, a left-handed/right-handed periodic structure, etc.), new results involving coupled waveguides and a high finesse cavity containing an electromagnetically induced transparency (EIT) medium are presented. Calculations clearly show that for pulses with a carrier tuned at the resonance of the stratified media, one generally has subluminal propagation. Alternatively, in stop gaps or away from the resonances one ends up with superluminal transit. In the case of the EIT cavity it is shown that the large dispersion offered by the intracavity medium can lead to substantial superluminality (ng≃−106) with peak transmission as high as 20%. This is in sharp contrast to large signal attenuation for usual superluminal transit. Note also that EIT, to the best of the authors knowledge, has so far been used to achieve only slow light.

We analyse the superluminal propagation of narrow-band pulses at resonances in dissipative media. The output waveform is an attenuated, undistorted, time-advanced version of the input which can be interpreted as the result of the interference of two scaled replicas of the input having a positive relative delay. The proposed analysis applies both to the propagation in a passive bulk medium at an electronic resonance and in a dielectric waveguide coupled to a lossy micro-ring resonator. This latter case provides a clear insight of the underlying physical phenomena.

We consider pulse propagation through a two component composite medium (metal inclusions in a dielectric host) with or without cavity mirrors. We show that a very thin slab of such a medium, under conditions of localized plasmon resonance, can lead to significant superluminality with detectable levels of the transmitted pulse. A cavity containing the heterogeneous medium is shown to lead to subluminal-to-superluminal transmission depending on the volume fraction of the metal inclusions. The predictions of the phase time calculations are verified by explicit calculations of the transmitted pulse shapes. We also demonstrate the independence of phase time on system width and the volume fraction under specific conditions.

To investigate the physical meaning of pulse peak in fast and slow light media, we investigated propagation of differently shaped pulses experimentally, controlling the sharpness of the pulse peak. Symmetric behavior with respect to fast and slow light was observed in traditional Gaussian pulses; that is, propagated pulses were advanced or delayed, respectively, whereas the pulse shape remained unchanged. This symmetry broke down when the pulse peak was sharpened; in the fast light medium, the sharp pulse peak propagated with luminal velocity, and the transmitted pulse deformed into a characteristic asymmetric profile. In contrast, in the slow light medium, a time-delayed smooth peak appeared with a bending point at

t=0

. This symmetry breaking with respect to fast and slow light is a universal characteristic of pulse propagation in causal dispersive systems. The sharp pulse peak can be recognized as a bending nonanalytical point and may be capable of transferring information.

Spectral reshaping and nonuniform phase delay associated with an electromagnetic pulse propagating in a temporally dispersive medium may lead to interesting observations in which the group velocity becomes superluminal or even negative. In such cases, the finite bandwidth of the superluminal region implies the inevitable existence of a cutoff distance beyond which a superluminal pulse becomes subluminal. In this paper, we derive a closed-form analytic expression to estimate this cutoff distance in abnormal dispersive media with gain. Moreover, the method of steepest descent is used to track the time-frequency dynamics associated with the evolution of the center of mass of a superluminal pulse to the subluminal regime. This evolution takes place at longer propagation depths as a result of the subluminal components affecting the behavior of the pulse. Finally, the analysis presents the fundamental limitations of superluminal propagation in light of factors such as the medium depth, pulse width, and the medium dispersion strength.

In this paper, we study theoretically the behavior of a pulse as it propagates through an intracavity fast-light medium. The method of using a transfer function to determine a pulse after it passes through a cavity is well known. However, this approach cannot be used to determine the behavior of the pulse inside the cavity. To circumvent this constraint, we use an approach that starts by finding a self-consistent solution for a monochromatic field of infinite spatial and temporal extents, and determine its amplitudes before, inside, and after the cavity. We then construct a Gaussian input pulse by adding a set of these waves, properly phased and weighted, to represent a moving pulse before the cavity. Adding these waves at various time intervals then yields the complete spatial profile everywhere, including before, inside and after the cavity. We first confirm the prediction of this model by analyzing the behavior of a pulse passing through an empty cavity, and comparing the prediction of the output with the one produced by the transfer function method. We then apply the technique to a cavity containing a fast-light medium. The resulting model allows us to visualize the behavior of the pulse as it propagates superluminally inside the cavity, and interferes with itself through multiple bounces. For a vanishing group index, an interference pattern is formed immediately after the pulse enters the cavity, with an output pulse emerging with no time delay or distortion. The results obtained here illustrates the physical mechanism behind pulse propagation through a white light cavity, a process we have proposed earlier for realizing a high bandwidth, long delay data buffering system

The propagation of a pulse through one-dimensional photonic crystals that contain a dispersive and absorptive defect layer doped with two-level atoms is discussed. The dynamical evolution of the pulse inside the photonic crystal is presented. Superluminal negative group velocity (the peak appears at the exit end before it reaches the input end) is discovered. Although the group velocity is larger than c and even negative, the velocity of energy propagation never exceeds the vacuum light speed. The appearance of the superluminal advance or subluminal delay of the pulse peak inside the photonic crystal or at the exit end is due to the wave interference from Bragg reflections.