It is shown that dominant trapping sets of regular low-density parity-check (LDPC) codes, so-called absorption sets, undergo a two-phased dynamic behavior in the iterative message-passing decoding algorithm. Using a linear dynamic model for the iteration behavior of these sets, it is shown that they undergo an initial geometric growth phase which stabilizes in a final bit-flipping behavior where the algorithm reaches a fixed point. This analysis is shown to lead to very accurate numerical calculations of the error floor bit error rates down to error rates that are inaccessible by simulation. The topology of the dominant absorption sets of an example code, the IEEE 802.3an (2048,1723) regular LDPC code, are identified and tabulated using topological relationships in combination with search algorithms.
It is shown that dominant trapping sets of regular low-density parity-check (LDPC) codes, so-called absorption sets, undergo a two-phased dynamic behavior in the iterative message-passing decoding algorithm. Using a linear dynamic model for the iteration behavior of these sets, it is shown that they undergo an initial geometric growth phase which stabilizes in a final bit-flipping behavior where the algorithm reaches a fixed point. This analysis is shown to lead to very accurate numerical calculations of the error floor bit error rates down to error rates that are inaccessible by simulation. The topology of the dominant absorption sets of an example code, the IEEE 802.3an (2048,1723) regular LDPC code, are identified and tabulated using topological relationships in combination with search algorithms.
It is shown that dominant trapping sets of regular LDPC codes, so called absorption sets, undergo a two-phased dynamic behavior in the iterative message-passing decoding algorithm. Using a linear dynamic model for the iteration behavior of these sets, it is shown that they undergo an initial geometric growth phase which stabilizes in a final bit-flipping behavior where the algorithm reaches a fixed point. This analysis is shown to lead to very accurate numerical calculations of the error floor bit error rates down to error rates that are inaccessible by simulation. The topology of the dominant absorption sets of an example code, the IEEE 802.3an (2048,1723) regular LDPC code, are identified and tabulated using topological relationships in combination with search algorithms.
It is shown that dominant trapping sets of regular LDPC codes, so called absorption sets, undergo a two-phase dynamic behavior in the iterative message-passing (MP) decoding algorithm. Using a linear dynamic model for the iteration behavior of these sets, it is shown that they undergo an initial geometric growth phase which stabilizes in a final bit-flipping behavior where the algorithm reaches a fixed point. This analysis is shown to lead to very accurate numerical calculations of the error floor bit error rates down to error rates that are inaccessible by simulation. The topology of the dominant absorption sets of an example code, the IEEE 802.3 an (2048, 1723) regular LDPC code, is identified and tabulated using topological relationships in combination with search algorithms.
The goal of error control coding is to encode information in such a way, that in the event that errors occur during transmission over a noisy communication channel or during storage in an unreliable memory, the receiver can correct the errors and recover the original transmitted information. Low-density parity-check (LDPC) codes are a kind of high performance linear block code, which are already used in many recent communication systems. Information rates guaranteed by these codes approach the theoretical Shannon capacity limit. In addition, LDPC codes are now widely used in practice and included in many communication standards. Therefore study of these codes is very important and practical approaches to their design and decoding techniques are of great interest. There exist very good decoding algorithms for LDPC codes with respect to different channel models. However, LDPC codes suffer from the infamous error floor problem at high signal-to-noise ratios. This problem is attributed to the trapping sets by Richardson. It is shown that the dominant trapping sets of regular LDPC codes, so called absorption sets, undergo a two-phase dynamic behavior in the iterative message-passing decoding algorithm. We present a linear dynamic model for the iteration behavior of these sets. It can be seen that they undergo an initial geometric growth phase which stabilizes in a final bit-flipping behavior where the algorithm reaches a fixed point. Our analysis is shown to lead to very accurate numerical calculations of the error floor bit error rates down to error rates that are inaccessible by simulation. The topologies of the dominant absorption sets of two example codes, the IEEE 802.3an [2048,1723] regular (6,32) LDPC code and the Tanner [155,64,20] regular (3,5) LDPC code, are identified and tabulated by using topological features in combination with search algorithms, respectively. To make our analysis more complete, we provide more solid evidence showing that trapping sets are equivalent to absorption sets. In other words, we argue that absorption sets characterize all failure mechanisms. Some insights from our linear analysis can be borrowed to approach this problem. Another insight that this formula provides to us is the means to reduce the error floor, which is another important part of what we hoped to achieve by developing the formula in the first place. By allowing the log-likelihood ratios (LLRs) utilized by the message-passing decoding to grow bigger in precision length, the absorption sets as a trouble-causing structure will be successfully corrected. Therefore, the absorption sets, generically born with the code design, will no longer threaten the error correcting performance as long as the messages have enough room and time to grow. This translates to greater LLR clipping thresholds and more iterations, both of which are preset at the decoder. However, the actual settings are dependent on how much the subgraph of the dominant absorption set resembles that of a non-zero minimum-weight codeword, therefore the settings are empirical. In general more likeness in their topologies, the more effort it costs to correct the absorption set.
It is well-known that the performance of low-density parity-check codes is compromised by the emergence of an error floor, which is caused by so-called trapping sets. By identifying the dominant trapping sets, this error floor can be estimated analytically using a linear model. In this paper, this linear approach is improved to make the analysis more accurate. Then, guided by the error probability formula, a simple but effective method to improve the code performance in the error floor region is proposed, by introducing a boosting factor to the log-likelihood ratios returned from unsatisfied check nodes during the early decoding stages. It is shown that the effect of the dominant trapping sets can thus be reduced. The dominance of trapping sets can be further reduced by extending the computational range of the LLRs at the decoder. To illustrate these ideas, a short regular LDPC code constructed by Tanner, as well as the IEEE 802.3 LDPC code, are studied.
This paper presents an efficient algorithm for finding the dominant trapping sets of a low-density parity-check (LDPC) code. The algorithm can be used to estimate the error floor of LDPC codes or to be part of the apparatus to design LDPC codes with low error floors. For regular codes, the algorithm is initiated with a set of short cycles as the input. For irregular codes, in addition to short cycles, variable nodes with low degree and cycles with low approximate cycle extrinsic message degree (ACE) are also used as the initial inputs. The initial inputs are then expanded recursively to dominant trapping sets of increasing size. At the core of the algorithm lies the analysis of the graphical structure of dominant trapping sets and the relationship of such structures to short cycles, low-degree variable nodes and cycles with low ACE. The algorithm is universal in the sense that it can be used for an arbitrary graph and that it can be tailored to find other graphical objects, such as absorbing sets and Zyablov-Pinsker (ZP) trapping sets, known to dominate the performance of LDPC codes in the error floor region over different channels and for different iterative decoding algorithms. Simulation results on several LDPC codes demonstrate the accuracy and efficiency of the proposed algorithm. In particular, the algorithm is significantly faster than the existing search algorithms for dominant trapping sets.
The class of low-density parity-check (LDPC) codes is attractive, since such codes can be decoded using practical message-passing algorithms, and their performance is known to approach the Shannon limits for suitably large block lengths. For the intermediate block lengths relevant in applications, however, many LDPC codes exhibit a so-called “error floor,” corresponding to a significant flattening in the curve that relates signal-to-noise ratio (SNR) to the bit-error rate (BER) level. Previous work has linked this behavior to combinatorial substructures within the Tanner graph associated with an LDPC code, known as (fully) absorbing sets. These fully absorbing sets correspond to a particular type of near-codewords or trapping sets that are stable under bit-flipping operations, and exert the dominant effect on the low BER behavior of structured LDPC codes. This paper provides a detailed theoretical analysis of these (fully) absorbing sets for the class ofCp,γarray-based LDPC codes, including the characterization of all minimal (fully) absorbing sets for the array-based LDPC codes forγ=2,3,4, and moreover, it provides the development of techniques to enumerate them exactly. Theoretical results of this type provide a foundation for predicting and extrapolating the error floor behavior of LDPC codes.