© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

IEEE Transactions on Applied Superconductivity

Applications of mm-wave SIS mixers to middle atmosphere monitoring systems

Hideo Suzuki, Takeshi Imamura, Naoki Yokoyama, Minoru Suzuki, Hideo Ogawa, K. Kawabata, Yasuo Fukui

Published Jun 1, 1995• 3 citations

Abstract

We have already developed a low-noise 100 GHz band (98-115 GHz) SIS mixer using Nb/AlOx/Nb junction technology. The mixer has a noise temperature of 17 K when used as a double sideband (DSB) heterodyne receiver. The SIS receiver has been in use in the 4 m radio telescope at Nagoya University for five years. As a further application of the SIS mixer, we developed middle-atmosphere ozone monitoring system using an SIS mixer for the first time. The system can measure ozone mixing ratio every 5 minutes. The integration time is less than 1/10 of the time needed in a conventional system using Schottky barrier diode (SBD) mixers. We have also begun developing developing a 200 GHz band (210-280 GHz) SIS mixer for radio astronomy and for monitoring other minor constituents such as ClO. The preliminary experiment showed that the mixer has a rather low noise temperature of 60 K (DSB).>

DOI: 10.1109/77.403296

Related papers

A 200-300 GHz single sideband SIS mixer for radio astronomy

Alexandre Karpov, J. Blondel, Dominique Billon-Pierron +1 more

We present an ultra broadband low noise single sideband (SSB) SIS mixer developed for 200-300 GHz radio astronomy receivers. The mixer uses two Nb/AlO/sub x//Nb junctions. Image band rejection by 20 dB is provided in the entire 200-300 GHz band using a mechanical tuning of the single noncontacting backshort in the mixer. The SIS receiver SSB noise temperature is close to 50 K in the main part of the band. A speed-up of the observations at radio telescopes by a factor 2-3 is expected with the new receiver.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•2 citations

Low-noise THz-range Nb based SIS Receivers for Radio Astronomy

Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko +4 more

This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Nov 8, 2020•7 citations

1-THz low-noise SIS mixer with a double-dipole antenna

S. V. Shitov, A. V. Markov, Brian D. Jackson +4 more

A quasi-optical mixer containing two Nb/Al/AlO x /Nb superconducting tunnel junctions integrated into a NbTiN/SiO 2 /Al microstrip line is studied experimentally in the 800–1000 GHz frequency range. The mixer is developed as an optional front end of the heterodyne receiver operating in frequency band 3 or 4 and incorporated into the HIFI module of the Herschel space-borne telescope. The double-dipole antenna of the mixer is made of NbTiN and Al films; the quarter-wavelength reflector, of a Nb film. The mixer is optimized for the IF band of 4–8 GHz. The double-sideband noise temperature T RX measured at 935 GHz is 250 K at a mixer temperature of 2 K and an IF of 1.5 GHz. Within 850–1000 GHz, T RX remains below 350 K. The antenna pattern is symmetrical with a sidelobe level below −16 dB.

Technical Physics•Sep 1, 2002•5 citations

A 100 - 115 GHz SIS receiver for radio astronomy

Hideo Ogawa

A 110 GHz superconductor insulator superconductor (SIS) tunnel junction receiver has been developed and used in regular astronomical observations on the 4m radio telescope at the Department of Astrophysics, Nagoya University. The SIS junction consists of a sandwich structure of Nb/AlOx/Nb, and is cooled to 4.2K with a closed cycle He-gas refrigerator. The receiver exhibits a best double side band noise temperature of 17±2 K at 110GHz. The receiver has a good response over this input frequency range of 98-115 GHz.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Oct 1, 1991•4 citations

A three photon noise SIS heterodyne receiver at submillimeter wavelength

Alexandre Karpov, J. Blondel, M. Voß +1 more

An ultra-low noise single sideband SIS receiver has been prepared for radio astronomy at the sub millimeter wavelength /spl lambda//spl ap/0.85 mm. The minimum single sideband receiver noise temperature of 48 K corresponds to 3 h/spl omega//k or equivalent number of 3 photon of noise. The minimum single sideband SIS mixer noise temperature is about 20 K, close to 1.2 h/spl omega//k, or one photon of noise. The Nb/AlOx/Nb junctions with a Josephson critical current density of 9 KA/cm/sup 2/ and with the area of about 0.9 /spl mu/m/sup 2/ were used. The receiver has been tested at the 30 meter IRAM radio telescope in the winter seasons of 1997 and 1998. The observations at the radio telescope are speeded up by a factor of two to three with the new receiver.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•30 citations

A 547 GHz SIS receiver employing a submicron Nb junction with an integrated matching circuit

Pascal Febvre, William R. McGrath, P. D. Batelaan +4 more

A heterodyne receiver using an SIS (superconductor-insulator-superconductor) waveguide mixer with two mechanical tuners has been built and characterized over the frequency range of 460 GHz to 630 GHz. This receiver is designed for radioastronomy applications. The mixer uses high-current-density, 0.25- mu m/sup 2/, Nb/AlO/sub x//Nb SIS tunnel junctions with integrated superconductive RF circuits to tune the junction capacitance. A DSB (double sideband) receiver noise temperature as low as 200+or-17 K has been obtained at 540 GHz. In addition, negative differential resistance has been observed in the DC I-V (current-voltage) curve at 487-491 GHz.>

IEEE MTT-S International Microwave Symposium digest•Dec 30, 2002•4 citations

We have already developed a low-noise 100 GHz band (98-115 GHz) SIS mixer using Nb/AlOx/Nb junction technology. The mixer has a noise temperature of 17 K when used as a double sideband (DSB) heterodyne receiver. The SIS receiver has been in use in the 4 m radio telescope at Nagoya University for five years. As a further application of the SIS mixer, we developed middle-atmosphere ozone monitoring system using an SIS mixer for the first time. The system can measure ozone mixing ratio every 5 minutes. The integration time is less than 1/10 of the time needed in a conventional system using Schottky barrier diode (SBD) mixers. We have also begun developing developing a 200 GHz band (210-280 GHz) SIS mixer for radio astronomy and for monitoring other minor constituents such as ClO. The preliminary experiment showed that the mixer has a rather low noise temperature of 60 K (DSB).>

We present an ultra broadband low noise single sideband (SSB) SIS mixer developed for 200-300 GHz radio astronomy receivers. The mixer uses two Nb/AlO/sub x//Nb junctions. Image band rejection by 20 dB is provided in the entire 200-300 GHz band using a mechanical tuning of the single noncontacting backshort in the mixer. The SIS receiver SSB noise temperature is close to 50 K in the main part of the band. A speed-up of the observations at radio telescopes by a factor 2-3 is expected with the new receiver.

This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.

A quasi-optical mixer containing two Nb/Al/AlO x /Nb superconducting tunnel junctions integrated into a NbTiN/SiO 2 /Al microstrip line is studied experimentally in the 800–1000 GHz frequency range. The mixer is developed as an optional front end of the heterodyne receiver operating in frequency band 3 or 4 and incorporated into the HIFI module of the Herschel space-borne telescope. The double-dipole antenna of the mixer is made of NbTiN and Al films; the quarter-wavelength reflector, of a Nb film. The mixer is optimized for the IF band of 4–8 GHz. The double-sideband noise temperature T RX measured at 935 GHz is 250 K at a mixer temperature of 2 K and an IF of 1.5 GHz. Within 850–1000 GHz, T RX remains below 350 K. The antenna pattern is symmetrical with a sidelobe level below −16 dB.

A 110 GHz superconductor insulator superconductor (SIS) tunnel junction receiver has been developed and used in regular astronomical observations on the 4m radio telescope at the Department of Astrophysics, Nagoya University. The SIS junction consists of a sandwich structure of Nb/AlOx/Nb, and is cooled to 4.2K with a closed cycle He-gas refrigerator. The receiver exhibits a best double side band noise temperature of 17±2 K at 110GHz. The receiver has a good response over this input frequency range of 98-115 GHz.

An ultra-low noise single sideband SIS receiver has been prepared for radio astronomy at the sub millimeter wavelength /spl lambda//spl ap/0.85 mm. The minimum single sideband receiver noise temperature of 48 K corresponds to 3 h/spl omega//k or equivalent number of 3 photon of noise. The minimum single sideband SIS mixer noise temperature is about 20 K, close to 1.2 h/spl omega//k, or one photon of noise. The Nb/AlOx/Nb junctions with a Josephson critical current density of 9 KA/cm/sup 2/ and with the area of about 0.9 /spl mu/m/sup 2/ were used. The receiver has been tested at the 30 meter IRAM radio telescope in the winter seasons of 1997 and 1998. The observations at the radio telescope are speeded up by a factor of two to three with the new receiver.

A heterodyne receiver using an SIS (superconductor-insulator-superconductor) waveguide mixer with two mechanical tuners has been built and characterized over the frequency range of 460 GHz to 630 GHz. This receiver is designed for radioastronomy applications. The mixer uses high-current-density, 0.25- mu m/sup 2/, Nb/AlO/sub x//Nb SIS tunnel junctions with integrated superconductive RF circuits to tune the junction capacitance. A DSB (double sideband) receiver noise temperature as low as 200+or-17 K has been obtained at 540 GHz. In addition, negative differential resistance has been observed in the DC I-V (current-voltage) curve at 487-491 GHz.>