Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Fortschritte der Physik

Macroscopic quantum behavior of superconducting quantum interference devices

Maria Gabriella Castellano

Published Apr 24, 2003• 3 citations
Publisher

Abstract

Abstract Superconducting quantum interference devices (SQUIDs) are made by a superconducting loop interrupted by one or more Josephson junctions. They are described in terms of a macroscopic variable, the magnetic flux, which shows quantum effects such as tunnelling through a potential barrier. Besides making up the source of a quantum state, SQUIDs also provide the instruments necessary for its probing: as a fact, SQUID based magnetometers have a sensitivity approaching the quantum limit. In this paper I will review the working principle of these devices and illustrate the system of SQUIDs realized in my group to test the quantum behavior at a macroscopic level.

DOI
10.1002/prop.200310041

Related papers

Nanobridge superconducting quantum interference devices: Beyond the Josephson limit

Dibyendu Hazra

Nanoscale superconducting quantum interference devices (nano-SQUIDS) where the weak links are made from nanobridges, i.e., nanobridge SQUIDs (NBSs), are one of the most sensitive magnetometers for nanoscale magnetometry. Because of very strong nonlinearity in the nanobridge-electrode joints, the applied magnetic flux (${\mathrm{\ensuremath{\Phi}}}_{a}$)--critical current (${I}_{c}$) characteristics of NBSs differ very significantly from conventional tunnel-junction SQUIDs, especially when the nanobridges are long and/or the screening parameter is large. However, in most of the theoretical descriptions, NBSs have been treated as the conventional tunnel-junction SQUIDs, which are based on the dc Josephson effect. Here, I present a model demonstrating that for long nanobridges and/or large screening parameters the ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$ of a NBS can be explained by merely considering the fluxoid quantization in the NBS loop and the energy of the NBS; it is not necessary to take the Josephson effect into consideration. I also demonstrate that using the model, one can derive useful expressions such as the modulation depth and transfer function. I discuss the role of the kinetic inductance fraction ($\ensuremath{\kappa}$) in determining ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$. I compare the predictions of the present model with the experimental data already published by several groups.

arXiv:1809.09510•Physical review. B./Physical review. B•Apr 5, 2019•11 citations

Studies of Quantum Transitions of Magnetic Flux in a RF Squid Qubit

Luigi Longobardi

At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.

•Oct 22, 2010•0 citations

Applications of superconducting electronics to quantum optics and quantum metrology

Ling Yun Hao

SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.  We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.

Advances in Automobile Engineering•Jan 1, 2021•0 citations

Nonlocal superconducting quantum interference device

Taewan Noh, Andrew Kindseth, Venkat Chandrasekhar

Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.

arXiv:2011.06667•Physical review. B./Physical review. B•Aug 4, 2021•12 citations

Qubits

Editor: J. E. Mooij

Quantum mechanics and superconductivity are intimately connected on many levels. Quantum mechanics is needed to understand why a metal is a metal. The BCS condensate of Cooper pairs would not exist without quantum mechanics, nor could Cooper pairs tunnel through the barriers of Josephson junctions. The name SQUID is the abbreviation of superconducting quantum interference device. Yet another level of quantumness has been added in the last two decades. It turns out to be possible to design and fabricate superconducting objects that have macroscopic dimensions and properties, but behave as if they are single quantum particles. Amplitude and phase of the superconducting wavefunction act as conjugate quantum variables. Practical devices and circuits make use of Josephson junctions to reach the parameter values that are needed, but there is a clear distinction from the Josephson electronics circuits in the other chapters of this book. The latter may, in this context, well be referred to as being classical.

CRC Press eBooks•Nov 11, 2011•4 citations

Quantum detector based on a superposition of macroscopic states in a phase qubit

V. I. Shnyrkov, Сергей Иванович Мельник

A quantum detector whose working principle is based on magnetic-field modulation of a circulating supercurrent in the quantum ground state of a macroscopic superconducting loop with a Josephson junction. Under the influence of an external magnetic flux equal to Φ0∕2 (or Φ0), two (or three) classical states are coupled to each other by quantum tunneling through a potential barrier, and therefore the detector is a two-level (or three-level) system. In the low-temperature region and under the condition of very weak damping, the mean value of the circulating supercurrent reflects the character of the variation of the quantum superposition of macroscopic states, which is sensitive to the symmetry of the potential. The variations of the current are amplified and detected in a measurement scheme similar to the signal registration in a nonhysteretic rf SQUID. It is shown by a numerical analysis that in comparison with a qubit detector based on an SIS junction, a detector with an ScS junction is faster and has much larger amplitudes of energy splitting at the same parameters. The results presented for double- and triple-well potentials clearly indicate that a qubit with an ScS junction can act as a detector with a sensitivity determined by the quantum noise of the amplifier.

Low Temperature Physics•Jan 1, 2007•10 citations
Abstract Superconducting quantum interference devices (SQUIDs) are made by a superconducting loop interrupted by one or more Josephson junctions. They are described in terms of a macroscopic variable, the magnetic flux, which shows quantum effects such as tunnelling through a potential barrier. Besides making up the source of a quantum state, SQUIDs also provide the instruments necessary for its probing: as a fact, SQUID based magnetometers have a sensitivity approaching the quantum limit. In this paper I will review the working principle of these devices and illustrate the system of SQUIDs realized in my group to test the quantum behavior at a macroscopic level.
Nanoscale superconducting quantum interference devices (nano-SQUIDS) where the weak links are made from nanobridges, i.e., nanobridge SQUIDs (NBSs), are one of the most sensitive magnetometers for nanoscale magnetometry. Because of very strong nonlinearity in the nanobridge-electrode joints, the applied magnetic flux (${\mathrm{\ensuremath{\Phi}}}_{a}$)--critical current (Ic{I}_{c}Ic​) characteristics of NBSs differ very significantly from conventional tunnel-junction SQUIDs, especially when the nanobridges are long and/or the screening parameter is large. However, in most of the theoretical descriptions, NBSs have been treated as the conventional tunnel-junction SQUIDs, which are based on the dc Josephson effect. Here, I present a model demonstrating that for long nanobridges and/or large screening parameters the ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$ of a NBS can be explained by merely considering the fluxoid quantization in the NBS loop and the energy of the NBS; it is not necessary to take the Josephson effect into consideration. I also demonstrate that using the model, one can derive useful expressions such as the modulation depth and transfer function. I discuss the role of the kinetic inductance fraction ($\ensuremath{\kappa}$) in determining ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$. I compare the predictions of the present model with the experimental data already published by several groups.
At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.
SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.  We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.
Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.
Quantum mechanics and superconductivity are intimately connected on many levels. Quantum mechanics is needed to understand why a metal is a metal. The BCS condensate of Cooper pairs would not exist without quantum mechanics, nor could Cooper pairs tunnel through the barriers of Josephson junctions. The name SQUID is the abbreviation of superconducting quantum interference device. Yet another level of quantumness has been added in the last two decades. It turns out to be possible to design and fabricate superconducting objects that have macroscopic dimensions and properties, but behave as if they are single quantum particles. Amplitude and phase of the superconducting wavefunction act as conjugate quantum variables. Practical devices and circuits make use of Josephson junctions to reach the parameter values that are needed, but there is a clear distinction from the Josephson electronics circuits in the other chapters of this book. The latter may, in this context, well be referred to as being classical.
A quantum detector whose working principle is based on magnetic-field modulation of a circulating supercurrent in the quantum ground state of a macroscopic superconducting loop with a Josephson junction. Under the influence of an external magnetic flux equal to Φ0∕2 (or Φ0), two (or three) classical states are coupled to each other by quantum tunneling through a potential barrier, and therefore the detector is a two-level (or three-level) system. In the low-temperature region and under the condition of very weak damping, the mean value of the circulating supercurrent reflects the character of the variation of the quantum superposition of macroscopic states, which is sensitive to the symmetry of the potential. The variations of the current are amplified and detected in a measurement scheme similar to the signal registration in a nonhysteretic rf SQUID. It is shown by a numerical analysis that in comparison with a qubit detector based on an SIS junction, a detector with an ScS junction is faster and has much larger amplitudes of energy splitting at the same parameters. The results presented for double- and triple-well potentials clearly indicate that a qubit with an ScS junction can act as a detector with a sensitivity determined by the quantum noise of the amplifier.