Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Photon Number-Resolved Detection With Sequentially Connected Nanowires

Matthew Bell, A.V. Antipov, Boris S. Karasik, Andrei V. Sergeev, Vladimir Mitin, A. Verevkin

Published Jun 1, 2007• 20 citations
Publisher

Abstract

Sequentially connected superconducting nanowires, such as nanopatterned meanders, are very promising candidates for single-photon detectors capable to resolve a number of photons in the pulse. In such devices, the photon number-resolved (PNR) mode is possible due to independent detection of electromagnetic quanta by different regions of the meander. Every photon creates a resistive region in the superconductive meander and the total resistance is expected to be proportional to the number of photons absorbed. While the PNR mode can be realized with available single-photon detectors based on NbN nanowires, up to now it has not been observed experimentally. Here we show that the PNR mode in NbN requires the proper impedance matching between readout circuitry and nanowire-based detector. We discuss possible design of the readout circuitry for PNR detection. Results of modeling show that a high impedance amplifier placed in close proximity to the superconducting nanostructure can provide effective readout for the NbN nanowire-based detector operating in PNR mode.

DOI
10.1109/tasc.2007.898616

Related papers

Resolving Photon Numbers Using a Superconducting Nanowire with Impedance-Matching Taper

Di Zhu, Marco Colangelo, Changchen Chen +4 more

Time- and number-resolved photon detection is crucial for quantum information processing. Existing photon-number-resolving (PNR) detectors usually suffer from limited timing and dark-count performance or require complex fabrication and operation. Here, we demonstrate a PNR detector at telecommunication wavelengths based on a single superconducting nanowire with an integrated impedance-matching taper. The taper provides a kΩ load impedance to the nanowire, making the detector's output amplitude sensitive to the number of photon-induced hotspots. The prototyping device was able to resolve up to four absorbed photons with 16.1 ps timing jitter and <2 c.p.s. device dark count rate. Its exceptional distinction between single- and two-photon responses is ideal for high-fidelity coincidence counting and allowed us to directly observe bunching of photon pairs from a single output port of a Hong-Ou-Mandel interferometer. This detector architecture may provide a practical solution to applications that require high timing resolution and few-photon discrimination.

arXiv:1911.09485•Nano Letters•Apr 9, 2020•103 citations

Physics and application of photon number resolving detectors based on superconducting parallel nanowires

Francesco Marsili, David Bitauld, Alessandro Gaggero +4 more

The parallel nanowire detector (PND) is a photon number resolving (PNR) detector that uses spatial multiplexing on a subwavelength scale to provide a single electrical output proportional to the photon number. The basic structure of the PND is the parallel connection of several NbN superconducting nanowires (≈100 nm wide, a few nm thick), folded in a meander pattern. PNDs were fabricated on 3–4 nm thick NbN films grown on MgO ( T S = 400 °C) substrates by reactive magnetron sputtering in an Ar/N 2 gas mixture. The device performance was characterized in terms of speed and sensitivity. PNDs showed a counting rate of 80 MHz and a pulse duration as low as 660 ps full-width at half-maximum (FWHM). Building the histograms of the photoresponse peak, no multiplication noise buildup is observable. Electrical and optical equivalent models of the device were developed in order to study its working principle, define design guidelines and develop an algorithm to estimate the photon number statistics of an unknown light. In particular, the modeling provides novel insight into the physical limit to the detection efficiency and to the reset time of these detectors. The PND significantly outperforms existing PNR detectors in terms of simplicity, sensitivity, speed and multiplication noise.

arXiv:0902.4824•New Journal of Physics•Apr 30, 2009•68 citations

New advanced generation of superconducting NbN-nanowire single-photon detectors capable of photon number resolving

Alexander A. Korneev, Alexander V. Divochiy, Michael A. Tarkhov +9 more

We present our latest generation of ultrafast superconducting NbN single-photon detectors (SSPD) capable of photon-number resolving (PNR). We have developed, fabricated and tested a multi-sectional design of NbN nanowire structures. The novel SSPD structures consist of several meander sections connected in parallel, each having a resistor connected in series. The novel SSPDs combine 10 μm × 10 μm active areas with a low kinetic inductance and PNR capability. That resulted in a significantly reduced photoresponse pulse duration, allowing for GHz counting rates. The detector's response magnitude is directly proportional to the number of incident photons, which makes this feature easy to use. We present experimental data on the performances of the PNR SSPDs. The PNR SSPDs are perfectly suited for fibreless free-space telecommunications, as well as for ultrafast quantum cryptography and quantum computing.

Journal of Physics Conference Series•Feb 1, 2008•4 citations

Superconducting nanowires connected in series for photon number resolving functionality

F. Mattioli, S. Jahanmirinejad, Zili Zhou +5 more

The experimental demonstration of a superconducting photon-number-resolving detector, based on the series connection of N superconducting nanowires, is presented. An integrated resistor is connected in parallel to each section of the device that provides in this way a single voltage-readout, proportional to the number of photons detected in distinct nanowires. As a proof of principle a four element detector has been fabricated from an NbN film on a GaAs substrate and fully characterized. Clearly separated output levels corresponding to the detection of n = 1 – 4 photons are observed achieving a single-photon system quantum efficiency of 2.6% at λ=1.3 μm. In order to demonstrate the potential scalability of the series-nanowire detector to a larger number of photons, we report our preliminary results in the characterization of detectors fabricated with 8 and 12 pixels. Clear evidence of n= 1-8 photon absorption in the 8-pixel detector has been achieved.

Journal of Physics Conference Series•May 12, 2014•5 citations

Superconducting parallel nanowire detector with photon number resolving functionality

Francesco Marsili, David Bitauld, Andrea Fiore +9 more

We present a new photon number resolving detector (PNR), the Parallel Nanowire Detector (PND), which uses spatial multiplexing on a subwavelength scale to provide a single electrical output proportional to the photon number. The basic structure of the PND is the parallel connection of several NbN superconducting nanowires (≈100 nm wide, few nm thick), folded in a meander pattern. Electrical and optical equivalents of the device were developed in order to gain insight on its working principle. PNDs were fabricated on 3–4 nm thick NbN films grown on sapphire (substrate temperature T S = 900°C) or MgO (T S = 400°C) substrates by reactive magnetron sputtering in an Ar/N2 gas mixture. The device performance was characterized in terms of speed and sensitivity. The photoresponse shows a full width at half maximum (FWHM) as low as 660 ps. PNDs showed counting performance at 80 MHz repetition rate. Building the histograms of the photoresponse peak, no multiplication noise buildup is observable and a one-photon quantum efficiency can be estimated to be η ∼ 3% (at 700 nm wavelength and 4.2 K temperature). The PND significantly outperforms existing PNR detectors in terms of simplicity, sensitivity, speed, and multiplication noise.

arXiv:0807.0526•Journal of Modern Optics•Nov 6, 2008•22 citations

Photon-number resolving detector based on a series array of superconducting nanowires

S. Jahanmirinejad, G. Frucci, F. Mattioli +4 more

We present the experimental demonstration of a superconducting photon number resolving detector. It is based on the series connection of N superconducting nanowires, each connected in parallel to an integrated resistor. The device provides a single voltage readout, proportional to the number of photons absorbed in distinct nanowires. Clearly separated output levels corresponding to the detection of n=1-4 photons are observed in a 4-element detector fabricated from an NbN film on GaAs substrate, with a single-photon system quantum efficiency of 2.6% at the wavelength of 1300nm. The series-nanowire structure is promising in view of its scalability to large photon numbers and high efficiencies.

arXiv:1203.5477•Applied Physics Letters•Aug 13, 2012•88 citations
Sequentially connected superconducting nanowires, such as nanopatterned meanders, are very promising candidates for single-photon detectors capable to resolve a number of photons in the pulse. In such devices, the photon number-resolved (PNR) mode is possible due to independent detection of electromagnetic quanta by different regions of the meander. Every photon creates a resistive region in the superconductive meander and the total resistance is expected to be proportional to the number of photons absorbed. While the PNR mode can be realized with available single-photon detectors based on NbN nanowires, up to now it has not been observed experimentally. Here we show that the PNR mode in NbN requires the proper impedance matching between readout circuitry and nanowire-based detector. We discuss possible design of the readout circuitry for PNR detection. Results of modeling show that a high impedance amplifier placed in close proximity to the superconducting nanostructure can provide effective readout for the NbN nanowire-based detector operating in PNR mode.
Time- and number-resolved photon detection is crucial for quantum information processing. Existing photon-number-resolving (PNR) detectors usually suffer from limited timing and dark-count performance or require complex fabrication and operation. Here, we demonstrate a PNR detector at telecommunication wavelengths based on a single superconducting nanowire with an integrated impedance-matching taper. The taper provides a kΩ load impedance to the nanowire, making the detector's output amplitude sensitive to the number of photon-induced hotspots. The prototyping device was able to resolve up to four absorbed photons with 16.1 ps timing jitter and <2 c.p.s. device dark count rate. Its exceptional distinction between single- and two-photon responses is ideal for high-fidelity coincidence counting and allowed us to directly observe bunching of photon pairs from a single output port of a Hong-Ou-Mandel interferometer. This detector architecture may provide a practical solution to applications that require high timing resolution and few-photon discrimination.
The parallel nanowire detector (PND) is a photon number resolving (PNR) detector that uses spatial multiplexing on a subwavelength scale to provide a single electrical output proportional to the photon number. The basic structure of the PND is the parallel connection of several NbN superconducting nanowires (≈100 nm wide, a few nm thick), folded in a meander pattern. PNDs were fabricated on 3–4 nm thick NbN films grown on MgO ( T S = 400 °C) substrates by reactive magnetron sputtering in an Ar/N 2 gas mixture. The device performance was characterized in terms of speed and sensitivity. PNDs showed a counting rate of 80 MHz and a pulse duration as low as 660 ps full-width at half-maximum (FWHM). Building the histograms of the photoresponse peak, no multiplication noise buildup is observable. Electrical and optical equivalent models of the device were developed in order to study its working principle, define design guidelines and develop an algorithm to estimate the photon number statistics of an unknown light. In particular, the modeling provides novel insight into the physical limit to the detection efficiency and to the reset time of these detectors. The PND significantly outperforms existing PNR detectors in terms of simplicity, sensitivity, speed and multiplication noise.
We present our latest generation of ultrafast superconducting NbN single-photon detectors (SSPD) capable of photon-number resolving (PNR). We have developed, fabricated and tested a multi-sectional design of NbN nanowire structures. The novel SSPD structures consist of several meander sections connected in parallel, each having a resistor connected in series. The novel SSPDs combine 10 μm × 10 μm active areas with a low kinetic inductance and PNR capability. That resulted in a significantly reduced photoresponse pulse duration, allowing for GHz counting rates. The detector's response magnitude is directly proportional to the number of incident photons, which makes this feature easy to use. We present experimental data on the performances of the PNR SSPDs. The PNR SSPDs are perfectly suited for fibreless free-space telecommunications, as well as for ultrafast quantum cryptography and quantum computing.
The experimental demonstration of a superconducting photon-number-resolving detector, based on the series connection of N superconducting nanowires, is presented. An integrated resistor is connected in parallel to each section of the device that provides in this way a single voltage-readout, proportional to the number of photons detected in distinct nanowires. As a proof of principle a four element detector has been fabricated from an NbN film on a GaAs substrate and fully characterized. Clearly separated output levels corresponding to the detection of n = 1 – 4 photons are observed achieving a single-photon system quantum efficiency of 2.6% at λ=1.3 μm. In order to demonstrate the potential scalability of the series-nanowire detector to a larger number of photons, we report our preliminary results in the characterization of detectors fabricated with 8 and 12 pixels. Clear evidence of n= 1-8 photon absorption in the 8-pixel detector has been achieved.
We present a new photon number resolving detector (PNR), the Parallel Nanowire Detector (PND), which uses spatial multiplexing on a subwavelength scale to provide a single electrical output proportional to the photon number. The basic structure of the PND is the parallel connection of several NbN superconducting nanowires (≈100 nm wide, few nm thick), folded in a meander pattern. Electrical and optical equivalents of the device were developed in order to gain insight on its working principle. PNDs were fabricated on 3–4 nm thick NbN films grown on sapphire (substrate temperature T S = 900°C) or MgO (T S = 400°C) substrates by reactive magnetron sputtering in an Ar/N2 gas mixture. The device performance was characterized in terms of speed and sensitivity. The photoresponse shows a full width at half maximum (FWHM) as low as 660 ps. PNDs showed counting performance at 80 MHz repetition rate. Building the histograms of the photoresponse peak, no multiplication noise buildup is observable and a one-photon quantum efficiency can be estimated to be η ∼ 3% (at 700 nm wavelength and 4.2 K temperature). The PND significantly outperforms existing PNR detectors in terms of simplicity, sensitivity, speed, and multiplication noise.
We present the experimental demonstration of a superconducting photon number resolving detector. It is based on the series connection of N superconducting nanowires, each connected in parallel to an integrated resistor. The device provides a single voltage readout, proportional to the number of photons absorbed in distinct nanowires. Clearly separated output levels corresponding to the detection of n=1-4 photons are observed in a 4-element detector fabricated from an NbN film on GaAs substrate, with a single-photon system quantum efficiency of 2.6% at the wavelength of 1300nm. The series-nanowire structure is promising in view of its scalability to large photon numbers and high efficiencies.