Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Chip-scale atomic magnetometer

Peter D. D. Schwindt, Svenja A. Knappe, Vishal Shah, Leo W. Hollberg, John E. Kitching, Li‐Anne Liew, John Moreland

Published Dec 17, 2004• 482 citations
Publisher

Abstract

Using the techniques of microelectromechanical systems, we have constructed a small low-power magnetic sensor based on alkali atoms. We use a coherent population trapping resonance to probe the interaction of the atoms’ magnetic moment with a magnetic field, and we detect changes in the magnetic flux density with a sensitivity of 50pTHz−1∕2 at 10Hz. The magnetic sensor has a size of 12mm3 and dissipates 195mW of power. Further improvements in size, power dissipation, and magnetic field sensitivity are immediately foreseeable, and such a device could provide a hand-held battery-operated magnetometer with an atom shot-noise limited sensitivity of 0.05pTHz−1∕2.

DOI
10.1063/1.1839274

Related papers

Microfabricated Atomic Magnetometer

Peter D. D. Schwindt, Svenja A. Knappe, Vishal Shah +4 more

Using the techniques of microelectromechanical systems, we are developing chip-scale atomic sensors based on laser excitation of alkali atoms. Recently, we demonstrated a magnetometer physics package based on coherent population trapping that had a sensitivity of 50 pT/Hzfrac12at 10 Hz, had a volume of 12 mm3, and used 195 mW of power as presented by Schwindt et al. (2004). To improve the sensitivity and reduce the power consumption of the magnetometer, we are evaluating other methods of interrogating the atoms for use in microfabricated devices. One of these methods uses frequency modulated nonlinear magneto-optical rotation (FM NMOR). We demonstrate that an FM NMOR magnetometer can be made to self-oscillate, offering simple construction and low power consumption

Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ...•Mar 22, 2006•1 citation

Chip-Scale Magnetic Measurements

The ability to measure tiny magnetic fields with good sensitivity can be found in many applications, from biological imaging to prospecting for buried treasure. However, the most sensitive magnetometers that operate in ambient conditions tend to be power-hungry, bulky, and heavy. Shrinking the size to just several millimeters and the power consumption to hundreds of milliwatts, Schwindt et al. have fabricated a sensitive magnetometer using microelectromechanical technology. A cloud of rubidium atoms trapped in a micromachined vapor cell is used to sense the magnetic field. The magnetic field splits the energy levels of rubidium atoms, and the extent of the splitting depends on the strength of the magnetic field. Changes in the magnetic field are then detected and tracked optically by the relative absorption changes of a laser light tuned to the split energy levels. It could be that in the not-too-distant future we could be using handheld battery-operated magnetometers. — ISO

Science•Jan 13, 2005•0 citations

Chip-Scale Ultra-Low Field Atomic Magnetometer Based on Coherent Population Trapping

Hyun-Gue Hong, Sang Eon Park, Sang-Bum Lee +5 more

We report a chip-scale atomic magnetometer based on coherent population trapping, which can operate near zero magnetic field. By exploiting the asymmetric population among magnetic sublevels in the hyperfine ground state of cesium, we observe that the resonance signal acquires sensitivity to magnetic field in spite of degeneracy. A dispersive signal for magnetic field discrimination is obtained near-zero-field as well as for finite fields (tens of micro-tesla) in a chip-scale device of 0.94 cm3 volume. This shows that it can be readily used in low magnetic field environments, which have been inaccessible so far in miniaturized atomic magnetometers based on coherent population trapping. The measured noise floor of 300 pT/Hz1/2 at the zero-field condition is comparable to that of the conventional finite-field measurement obtained under the same conditions. This work suggests a way to implement integrated atomic magnetometers with a wide operating range.

Sensors•Feb 22, 2021•19 citations

CPT Magnetometer with Atomic Energy Level Modulation

Liu Guo-Bin, Runchang Du, Liu Chao-Yang +1 more

We propose and experimentally investigate a coherent population trapping state based magnetometer prototype with 87 Rb atoms. Through modulating Zeeman sublevels with an ac magnetic field, not only a phase sensitive detection scheme suitable for miniature magnetometer is realized, but also the detection resolution of magnetic field intensity could be improved by a factor of two. Our study result indicates that it is a promising low power consumption miniature sensitive low magnetic field sensor offering spatially resolved measurement at the sub-millimetre level.

Chinese Physics Letters•Feb 1, 2008•16 citations

Chip-Scale Atomic Devices Based on Microfabricated Alkali Vapor Cells

John E. Kitching, Svenja A. Knappe, John Moreland +8 more

We describe recent progress in the development of millimeter-scale instruments based on alkali atom vapor cells implemented with microfabrication techniques. Because of their small size and correspondingly low power requirements, these "chip-scale" atomic clocks and magnetometers have the potential to bring atomically precise instrumentation to portable, battery-operated systems such as GPS receivers, remote sensors and wireless communication devices. In addition, wafer-level processing and assembly potentially allows for very low cost per instrument if high volumes are produced.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2007•1 citation

Research progress on high-sensitivity chip-scale atomic magnetometers

Hao Liu, liu lin, Xiaodong Han +1 more

As one of the fundamental properties of matter, magnetic fields have extensive application value in fields such as military, medical, and industrial sectors. High-sensitivity magnetic field measurement technology is crucial for exploring the physical world, ensuring national security, and promoting industrial development. Traditional magnetic sensors based on classical physics principles, such as fluxgate and Hall effect sensors, have become increasingly difficult to meet growing demands in terms of sensitivity, volume, and power consumption. In contrast, atomic magnetometers based on quantum effects utilize the interaction between atomic spins and external magnetic fields for measurement, offering advantages such as high sensitivity, no requirement for cryogenic cooling, and the capability for absolute measurement, making them a novel type of magnetic sensor that has received significant attention in recent years. In particular, the development of chip-scale atomic magnetometers, through technologies such as Micro-Electro-Mechanical Systems (MEMS), has significantly reduced the volume and power consumption of atomic magnetometers, enabling them to demonstrate tremendous application potential in fields such as ocean exploration, biomedical applications, and geological exploration. This paper will review the technological advances of high-sensitivity chip-scale atomic magnetometers, with a focus on discussing the latest achievements in their miniaturization and small-scale research.

Sixth Symposium on Novel Optoelectronic Detection Technology and Applications•May 11, 2026•0 citations
Using the techniques of microelectromechanical systems, we have constructed a small low-power magnetic sensor based on alkali atoms. We use a coherent population trapping resonance to probe the interaction of the atoms’ magnetic moment with a magnetic field, and we detect changes in the magnetic flux density with a sensitivity of 50pTHz−1∕2 at 10Hz. The magnetic sensor has a size of 12mm3 and dissipates 195mW of power. Further improvements in size, power dissipation, and magnetic field sensitivity are immediately foreseeable, and such a device could provide a hand-held battery-operated magnetometer with an atom shot-noise limited sensitivity of 0.05pTHz−1∕2.
Using the techniques of microelectromechanical systems, we are developing chip-scale atomic sensors based on laser excitation of alkali atoms. Recently, we demonstrated a magnetometer physics package based on coherent population trapping that had a sensitivity of 50 pT/Hzfrac12at 10 Hz, had a volume of 12 mm3, and used 195 mW of power as presented by Schwindt et al. (2004). To improve the sensitivity and reduce the power consumption of the magnetometer, we are evaluating other methods of interrogating the atoms for use in microfabricated devices. One of these methods uses frequency modulated nonlinear magneto-optical rotation (FM NMOR). We demonstrate that an FM NMOR magnetometer can be made to self-oscillate, offering simple construction and low power consumption
The ability to measure tiny magnetic fields with good sensitivity can be found in many applications, from biological imaging to prospecting for buried treasure. However, the most sensitive magnetometers that operate in ambient conditions tend to be power-hungry, bulky, and heavy. Shrinking the size to just several millimeters and the power consumption to hundreds of milliwatts, Schwindt et al. have fabricated a sensitive magnetometer using microelectromechanical technology. A cloud of rubidium atoms trapped in a micromachined vapor cell is used to sense the magnetic field. The magnetic field splits the energy levels of rubidium atoms, and the extent of the splitting depends on the strength of the magnetic field. Changes in the magnetic field are then detected and tracked optically by the relative absorption changes of a laser light tuned to the split energy levels. It could be that in the not-too-distant future we could be using handheld battery-operated magnetometers. — ISO
We report a chip-scale atomic magnetometer based on coherent population trapping, which can operate near zero magnetic field. By exploiting the asymmetric population among magnetic sublevels in the hyperfine ground state of cesium, we observe that the resonance signal acquires sensitivity to magnetic field in spite of degeneracy. A dispersive signal for magnetic field discrimination is obtained near-zero-field as well as for finite fields (tens of micro-tesla) in a chip-scale device of 0.94 cm3 volume. This shows that it can be readily used in low magnetic field environments, which have been inaccessible so far in miniaturized atomic magnetometers based on coherent population trapping. The measured noise floor of 300 pT/Hz1/2 at the zero-field condition is comparable to that of the conventional finite-field measurement obtained under the same conditions. This work suggests a way to implement integrated atomic magnetometers with a wide operating range.
We propose and experimentally investigate a coherent population trapping state based magnetometer prototype with 87 Rb atoms. Through modulating Zeeman sublevels with an ac magnetic field, not only a phase sensitive detection scheme suitable for miniature magnetometer is realized, but also the detection resolution of magnetic field intensity could be improved by a factor of two. Our study result indicates that it is a promising low power consumption miniature sensitive low magnetic field sensor offering spatially resolved measurement at the sub-millimetre level.
We describe recent progress in the development of millimeter-scale instruments based on alkali atom vapor cells implemented with microfabrication techniques. Because of their small size and correspondingly low power requirements, these "chip-scale" atomic clocks and magnetometers have the potential to bring atomically precise instrumentation to portable, battery-operated systems such as GPS receivers, remote sensors and wireless communication devices. In addition, wafer-level processing and assembly potentially allows for very low cost per instrument if high volumes are produced.
As one of the fundamental properties of matter, magnetic fields have extensive application value in fields such as military, medical, and industrial sectors. High-sensitivity magnetic field measurement technology is crucial for exploring the physical world, ensuring national security, and promoting industrial development. Traditional magnetic sensors based on classical physics principles, such as fluxgate and Hall effect sensors, have become increasingly difficult to meet growing demands in terms of sensitivity, volume, and power consumption. In contrast, atomic magnetometers based on quantum effects utilize the interaction between atomic spins and external magnetic fields for measurement, offering advantages such as high sensitivity, no requirement for cryogenic cooling, and the capability for absolute measurement, making them a novel type of magnetic sensor that has received significant attention in recent years. In particular, the development of chip-scale atomic magnetometers, through technologies such as Micro-Electro-Mechanical Systems (MEMS), has significantly reduced the volume and power consumption of atomic magnetometers, enabling them to demonstrate tremendous application potential in fields such as ocean exploration, biomedical applications, and geological exploration. This paper will review the technological advances of high-sensitivity chip-scale atomic magnetometers, with a focus on discussing the latest achievements in their miniaturization and small-scale research.