We propose the implementation of a Josephson radiation comb generator based on an extended Josephson junction subject to a time dependent magnetic field. The junction critical current shows known diffraction patterns and determines the position of the critical nodes when it vanishes. When the magnetic flux passes through one of such critical nodes, the superconducting phase must undergo a π-jump to minimize the Josephson energy. Correspondingly, a voltage pulse is generated at the extremes of the junction. Under periodic driving, this allows us to produce a comb-like voltage pulses sequence. In the frequency domain, it is possible to generate up to hundreds of harmonics of the fundamental driving frequency, thus mimicking the frequency comb used in optics and metrology. We discuss several implementations through a rectangular, cylindrical, and annular junction geometries, allowing us to generate different radiation spectra and to produce an output power up to 10 pW at 50 GHz for a driving frequency of 100 MHz.We propose the implementation of a Josephson radiation comb generator based on an extended Josephson junction subject to a time dependent magnetic field. The junction critical current shows known diffraction patterns and determines the position of the critical nodes when it vanishes. When the magnetic flux passes through one of such critical nodes, the superconducting phase must undergo a π-jump to minimize the Josephson energy. Correspondingly, a voltage pulse is generated at the extremes of the junction. Under periodic driving, this allows us to produce a comb-like voltage pulses sequence. In the frequency domain, it is possible to generate up to hundreds of harmonics of the fundamental driving frequency, thus mimicking the frequency comb used in optics and metrology. We discuss several implementations through a rectangular, cylindrical, and annular junction geometries, allowing us to generate different radiation spectra and to produce an output power up to 10 pW at 50 GHz for a driving frequency of 100 MHz.

arXiv:1502.07122Journal of Applied PhysicsSep 15, 20159 citations

Atomic Josephson Junctions

ScienceAug 3, 20010 citations

Tuning Josephson Junctions

ScienceApr 13, 20010 citations

Quasi-continuous dc voltage standard using sinusoidal and pulse-driven Josephson junction arrays

D. Georgakopoulos, Ilya F. Budovsky, Samuel P. Benz

Abstract Josephson voltage standards (JVSs) provide a primary realization of the volt, the unit of electromotive force. They generate direct current (dc) voltages up to 10 V and show agreement better than 1 nV V−1 at 10 V. For JVSs based on Josephson junction arrays (JJAs) that are driven by sinusoidal radiofrequency (RF) power, commonly referred to as continuous wave-driven JJAs (CWD JJAs), the minimum voltage that can be generated is limited to the voltage across one Josephson junction (JJ) for practical devices. To achieve this resolution, they may require a perfect JJA chip. JVSs based on a pulse-driven (PD) JJA require high performance electronics (i.e. high bandwidth, low distortion and jitter, pulse shaping filters and large memory) to achieve their minimum and maximum voltage. We have combined two CWD JJAs and two PD JJAs driven by two microwave inputs to one chip to generate quasi-continuous dc voltages up to the sum of the full-scale voltages of both JJAs that are robust to the imperfections of the JJs and have relaxed requirements on the RF electronics driving the JJA, compared to the existing CWD JVSs and PD JVSs, respectively. By use of the JJA chip at the National Measurement Institute Australia, we demonstrate its feasibility to generate voltages up to 1 V. Preliminary evaluation of the system shows that the voltage uncertainty can be 11 nV (k = 2) or better and the theoretical resolution is better than 1 nV from 0 V to 1 V. The main requirement is that all the JJs must have quantum locking ranges with respect to the power and frequency of the RF bias and for the PD JJAs to have a constant voltage over a range of dc bias current. Although this development is not a replacement for existing state-of-the-art JVSs, we anticipate that it will be an alternative fit-for-purpose solution for metrological applications under non-ideal operating conditions or when the components of the state-of-the-art solutions are not available.Abstract Josephson voltage standards (JVSs) provide a primary realization of the volt, the unit of electromotive force. They generate direct current (dc) voltages up to 10 V and show agreement better than 1 nV V−1 at 10 V. For JVSs based on Josephson junction arrays (JJAs) that are driven by sinusoidal radiofrequency (RF) power, commonly referred to as continuous wave-driven JJAs (CWD JJAs), the minimum voltage that can be generated is limited to the voltage across one Josephson junction (JJ) for practical devices. To achieve this resolution, they may require a perfect JJA chip. JVSs based on a pulse-driven (PD) JJA require high performance electronics (i.e. high bandwidth, low distortion and jitter, pulse shaping filters and large memory) to achieve their minimum and maximum voltage. We have combined two CWD JJAs and two PD JJAs driven by two microwave inputs to one chip to generate quasi-continuous dc voltages up to the sum of the full-scale voltages of both JJAs that are robust to the imperfections of the JJs and have relaxed requirements on the RF electronics driving the JJA, compared to the existing CWD JVSs and PD JVSs, respectively. By use of the JJA chip at the National Measurement Institute Australia, we demonstrate its feasibility to generate voltages up to 1 V. Preliminary evaluation of the system shows that the voltage uncertainty can be 11 nV (k = 2) or better and the theoretical resolution is better than 1 nV from 0 V to 1 V. The main requirement is that all the JJs must have quantum locking ranges with respect to the power and frequency of the RF bias and for the PD JJAs to have a constant voltage over a range of dc bias current. Although this development is not a replacement for existing state-of-the-art JVSs, we anticipate that it will be an alternative fit-for-purpose solution for metrological applications under non-ideal operating conditions or when the components of the state-of-the-art solutions are not available.

Measurement Science and TechnologyNov 9, 20221 citation

Superconductor and Josephson Junction

Hiu Yung Wong

Springer eBooksJan 1, 20250 citations

Detection of Low-Energy Fluxons From Discrete Long Josephson Junctions for Ballistic Computing

Han Cai, Liuqi Yu, Waltraut Wustmann +2 more

Single-flux quantum (SFQ) digital logic is typically energy efficient and fast, and logic that uses ballistic and reversible principles will provide a new platform for efficient computing. We are studying long Josephson junctions (LJJs), SFQs within them, and an SFQ detector, all intended for future ballistic logic gate experiments. Specifically, we launch low-energy SFQ into discrete LJJs, made from an array of 80 Josephson junctions (JJs) and connecting inductors. The component JJs have critical currents ( $I_{c}$ ) of only 7.5 $\mu \text{A}$ . Measurements of the discrete inductors from our LJJs indicate that the LJJ operates in the continuous regime of the Josephson transmission line, giving dynamics similar to continuous LJJs. The Josephson penetration depth is approximately 2.4 unit cells, and the rest energy of the SFQ in the LJJ is$\approx $47 zJ. While the SFQ launcher is fairly standard, the SFQ detector uses JJ critical currents of only$ \approx $16$ \mu \text{A}$. To understand the effects of noise in the circuit, we measured it in two systems: 1) at 4.2 K using a helium dunk probe; and 2) at 3.5 K in a cryogen-free refrigerator. Data show that SFQ detection events are synchronous with SFQ launch events in both systems. The additional jitter in one system over the other is predominantly attributed to noise in the detector. The traversal of the SFQ is consistent with ballistic propagation. This study shows the creation of low-energy SFQs in LJJs composed of discrete components and a method to detect these SFQs, as a step toward achieving ballistic reversible gates.Single-flux quantum (SFQ) digital logic is typically energy efficient and fast, and logic that uses ballistic and reversible principles will provide a new platform for efficient computing. We are studying long Josephson junctions (LJJs), SFQs within them, and an SFQ detector, all intended for future ballistic logic gate experiments. Specifically, we launch low-energy SFQ into discrete LJJs, made from an array of 80 Josephson junctions (JJs) and connecting inductors. The component JJs have critical currents ($I_{c}$) of only 7.5$\mu \text{A}$. Measurements of the discrete inductors from our LJJs indicate that the LJJ operates in the continuous regime of the Josephson transmission line, giving dynamics similar to continuous LJJs. The Josephson penetration depth is approximately 2.4 unit cells, and the rest energy of the SFQ in the LJJ is$\approx$47 zJ. While the SFQ launcher is fairly standard, the SFQ detector uses JJ critical currents of only$\approx$16$\mu \text{A}$. To understand the effects of noise in the circuit, we measured it in two systems: 1) at 4.2 K using a helium dunk probe; and 2) at 3.5 K in a cryogen-free refrigerator. Data show that SFQ detection events are synchronous with SFQ launch events in both systems. The additional jitter in one system over the other is predominantly attributed to noise in the detector. The traversal of the SFQ is consistent with ballistic propagation. This study shows the creation of low-energy SFQs in LJJs composed of discrete components and a method to detect these SFQs, as a step toward achieving ballistic reversible gates.

arXiv:2406.15671IEEE Transactions on Applied SuperconductivitySep 9, 20250 citations

I_{c}

) of only 7.5

\mu \text{A}

. Measurements of the discrete inductors from our LJJs indicate that the LJJ operates in the continuous regime of the Josephson transmission line, giving dynamics similar to continuous LJJs. The Josephson penetration depth is approximately 2.4 unit cells, and the rest energy of the SFQ in the LJJ is$\approx

47 zJ. While the SFQ launcher is fairly standard, the SFQ detector uses JJ critical currents of only

\approx

16

\mu \text{A}$. To understand the effects of noise in the circuit, we measured it in two systems: 1) at 4.2 K using a helium dunk probe; and 2) at 3.5 K in a cryogen-free refrigerator. Data show that SFQ detection events are synchronous with SFQ launch events in both systems. The additional jitter in one system over the other is predominantly attributed to noise in the detector. The traversal of the SFQ is consistent with ballistic propagation. This study shows the creation of low-energy SFQs in LJJs composed of discrete components and a method to detect these SFQs, as a step toward achieving ballistic reversible gates.