Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Telecommunication fiber link for the remote characterization of a magnesium optical frequency standard

Osama Terra, Gesine Grosche, Wolfgang A. Ertmer, Thorsten Feldmann, J. Friebe, Thomas Legero, B. Lipphardt, André Pape, Katharina Predehl, Ernst Maria Rasel, Matthias Riedmann, Uwe Sterr, Temmo Wübbena, H. Schnatz

Published Aug 20, 2009• 5 citations
Publisher

Abstract

We have characterized the 24Mg optical frequency standard at the Institute of Quantum Optics (IQ), Hanover, using a clock laser at the Physikalisch-Technische Bundesanstalt (PTB), Braunschweig, via a noise compensated 73 km fiber link and present preliminary results for the stability of the Mg standard. The stability of the clock laser (λ = 657 nm) is transferred with a femtosecond frequency comb to a telecommunication laser at λ = 1542 nm. The signal is then transmitted from PTB through the fiber link to IQ. A second comb at IQ (the remote end) is used to compare the transmitted laser frequency with that of the Mg clock laser λ = 914 nm. The frequency ratio of the clock lasers νMg/νCa shows a relative instability < 10-14 at 1 s. The upper limit for the contribution of the fiber link to the frequency instability is measured by connecting another optical fiber following the same 73 km route at Hanover computer center. The comparison performed at PTB between the local and the transmitted signal after a round trip length of 146 km showed a relative uncertainty below 1 x 10-19 and a short term instability σy(τ)= 3.3 x 10-15 / (τ/s).

DOI
10.1117/12.825228

Related papers

Phase-coherent comparison of two optical frequency standards over 146 km using a telecommunication fiber link

Osama Terra, Gesine Grosche, Katharina Predehl +5 more

We have explored the performance of two “dark fibers” of a commercial telecommunication fiber link for a remote comparison of optical clocks. The two fibers, linking the Leibniz University of Hanover (LUH) with the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, are connected in Hanover to form a total fiber length of 146 km. At PTB the performance of an optical frequency standard operating at 456 THz was imprinted to a cw transfer laser at 194 THz, and its frequency was transmitted over the fiber. In order to detect and compensate phase noise related to the optical fiber link we have built a low-noise optical fiber interferometer and investigated noise sources that affect the overall performance of the optical link. The frequency stability at the remote end has been measured using the clock laser of PTB’s Yb+ frequency standard operating at 344 THz. We show that the frequency of a frequency-stabilized fiber laser can be transmitted over a total fiber length of 146 km with a relative frequency uncertainty below 1×10−19, and short term frequency instability given by the fractional Allan deviation of σ y (τ)=3.3×10−15/(τ/s).

arXiv:0906.3476•Applied Physics B•Jul 29, 2009•61 citations

Phase-coherent frequency comparison of optical clocks using a telecommunication fiber link

H. Schnatz, Osama Terra, Katharina Predehl +16 more

We have explored the performance of two ldquodark fibersrdquo of a commercial telecommunication fiber link for a remote comparison of optical clocks. These fibers establish a network in Germany that will eventually link optical frequency standards at PTB with those at the Institute of Quantum Optics (IQ) at the Leibniz University of Hanover, and the Max Planck Institutes in Erlangen (MPL) and Garching (MPQ). We demonstrate for the first time that within several minutes a phase coherent comparison of clock lasers at the few 10-15level can also be accomplished when the lasers are more than 100 km apart. Based on the performance of the fiber link to the IQ we estimate the expected stability for the link from PTB to MPQ via MPL that bridges a distance of approximately 900 km.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2009•9 citations

Phase-coherent frequency comparison of optical clocks using a telecommunication fiber link

H. Schnatz, Osama Terra, Katharina Predehl +16 more

We have explored the performance of 2 "dark fibers" of a commercial telecommunication fiber link for a remote comparison of optical clocks. These fibers establish a network in Germany that will eventually link optical frequency standards at PTB with those at the Institute of Quantum Optics (IQ) at the Leibniz University of Hanover, and the Max Planck Institutes in Erlangen (MPL) and Garching (MPQ). We demonstrate for the first time that within several minutes a phase coherent comparison of clock lasers at the few 10(-15) level can also be accomplished when the lasers are more than 100 km apart. Based on the performance of the fiber link to the IQ, we estimate the expected stability for the link from PTB to MPQ via MPL that bridges a distance of approximately 900 km.

IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control•Jan 1, 2010•19 citations

Characterization of a 450 km baseline GPS carrier-phase link using an optical fiber link

Stefan Droste, Christian Grebing, Julia Leute +6 more

A global positioning system (GPS) carrier-phase frequency transfer link along a baseline of 450 km has been established and is characterized by comparing it to a phase-stabilized optical fiber link of 920 km length, established between the two endpoints, the Max-Planck-Institut für Quantenoptik in Garching and the Physikalisch-Technische Bundesanstalt in Braunschweig. The characterization is accomplished by comparing two active hydrogen masers operated at both institutes. The masers serve as local oscillators and cancel out when the double differences are calculated, such that they do not constitute a limitation for the GPS link characterization. We achieve a frequency instability of in 30 s and for long averaging times. Frequency comparison results obtained via both links show no deviation larger than the statistical uncertainty of . These results can also be interpreted as a successful cross-check of the measurement uncertainty of a truly remote end fiber link.

arXiv:1505.02144•New Journal of Physics•Aug 26, 2015•29 citations

A 1880 km Long Interferometric Optical Fibre Link PTB-MPQ-PTB for Chronometric Levelling with a Transportable Optical Clock

Alexander Kühl, Gulnara A. Vishnyakova, Thomas Waterholter +3 more

Chronometrie levelling [1-3] is a technique of deriving gravitational potential differences from clock frequency comparisons allowing the determination of height differences. Interferometric optical fibre links (IFL) [4] enable chronometric levelling between distant labs housing optical clocks [5]. An IFL is a phase stabilized telecom fibre link connection establishing a fixed optical phase relationship between two locations up to ~1000 km apart [6]. To perform a chronometric levelling campaign between the stationary optical clocks of the Physikalisch-Technische Bundesanstalt (PTB) and PTB's transportable Strontium clock [7] placed at the Max Planck Institute of Quantum Optics (MPQ) we have established a new 940 km long IFL between the two locations. At both link ends the frequencies of the clock lasers are compared to the 1,5 pm link transfer laser via fs-combs. To enable chronometric levelling experiments at the level of 10 cm height resolution, we aim a fractional frequency uncertainty of the frequency transfer of-18for averaging times of ~40 ks. To monitor the frequency transfer over the complete 940 km long fibre link the signal is sent back from the receiving end to the sender on a second fibre, which allows an out-of-loop characterization using data of the 1880 km loop. We study two different link setups, cf. Fig. 1a: i) a single-span loop configuration with the option to tap off the signal at MPQ with a passive frequency extraction unit [8]. This setup requires monitoring at the sending end only and allows us to investigate an ultralong IFL, even longer than the previous record [9]. And ii) an antiparallel configuration of two concatenated, individually stabilized interferometric fibre links. This setup offers lower instabilities due to a decreased delay-limit [10] but requires setting up and maintaining a stabilization system at both link ends. To compensate the attenuation of the fibres we used fibre Brillouin amplifier modules (FBAM) developed inhouse providing a typical gain of > 40 dB.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•1 citation

Study of optical frequency transfer via fiber

Jie Liu, Jing Gao, Guanjun Xu +6 more

Optical clocks are considered as promising candidates for redefining the second in the International System of Units. Compared with microwave clocks, optical clocks are powerful tools for the fundamental research such as the constancy of the fundamental constants, the validity of Einstein’s theory of general relativity, and the predictions of quantum electrodynamics. Recently two research groups have demonstrated the optical clocks with an unprecedented precision level of 10-18, which is two orders better than the present primary frequency standard. Using two Sr optical clocks and three Cs fountain clocks, SYRTE group has demonstrated the definition of second with optical clocks.#br#For redefining the second with optical clocks in the future, the optical clocks from the remote laboratories should have a high precision and the frequency of the optical clocks need to be transferred over a long distance, with extremely high precision. Unfortunately the conventional means of frequency transfer such as two-way satellite time and frequency transfer can reach a 10-16 level in one day which is far below the requirement for an optical clocks. Various methods have been developed to transfer optical frequency signal via optical fibers. Especially a research group from Germany has achieved a frequency transfer stability of 10-19 level in hundreds of seconds with a fiber length of 1840 km.#br#We demonstrate the recent development of optical frequency transfer over a 70-km fiber spool at National Time Service Center. The measurement shows that the compensation for the fiber noise is close to the limitation induced by the fiber delay for the Fourier frequency from 1 Hz to 250 Hz. The transfer stability (Allan deviation) of the fiber link is 1.2×10-15 in 1 s averaging time, and 1.4×10-18 in 10000 s. A preliminary test of the optical frequency transfer over a 100-km spooled fiber is achieved with a stability of roughly one order worse than the 71 km result, 5×10-15 in 1 s.#br#We demonstrate a new scheme of remote compensation for optical frequency transfer via fibers against conventional local compensation method. This new scheme has the advantage of great simplification of the local site, which can find applications in massive extension of star network. The key feature is that we transfer the mixture of the round-trip signal and local reference to the remote user’s end via an auxiliary fiber. At remote site, the fiber noise is measured and compensated by AOM2 accordingly.#br#Transfer stabilities of 13×10-15 in 1 s averaging time and 4.8×10-18 in 10000 s are achieved with the remote fiber noise compensation via a 25 km fiber spool. The demonstrated transfer stability is comparable to that obtained by the local fiber noise compensation method.#br#The future star fiber network of optical frequency transfer can benefit from this method, because the simpler local setup is required and even can be shared in the central site for multitudinous remote users.

Acta Physica Sinica•Jan 1, 2015•8 citations
We have characterized the 24Mg optical frequency standard at the Institute of Quantum Optics (IQ), Hanover, using a clock laser at the Physikalisch-Technische Bundesanstalt (PTB), Braunschweig, via a noise compensated 73 km fiber link and present preliminary results for the stability of the Mg standard. The stability of the clock laser (λ = 657 nm) is transferred with a femtosecond frequency comb to a telecommunication laser at λ = 1542 nm. The signal is then transmitted from PTB through the fiber link to IQ. A second comb at IQ (the remote end) is used to compare the transmitted laser frequency with that of the Mg clock laser λ = 914 nm. The frequency ratio of the clock lasers νMg/νCa shows a relative instability < 10-14 at 1 s. The upper limit for the contribution of the fiber link to the frequency instability is measured by connecting another optical fiber following the same 73 km route at Hanover computer center. The comparison performed at PTB between the local and the transmitted signal after a round trip length of 146 km showed a relative uncertainty below 1 x 10-19 and a short term instability σy(τ)= 3.3 x 10-15 / (τ/s).
We have explored the performance of two “dark fibers” of a commercial telecommunication fiber link for a remote comparison of optical clocks. The two fibers, linking the Leibniz University of Hanover (LUH) with the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, are connected in Hanover to form a total fiber length of 146 km. At PTB the performance of an optical frequency standard operating at 456 THz was imprinted to a cw transfer laser at 194 THz, and its frequency was transmitted over the fiber. In order to detect and compensate phase noise related to the optical fiber link we have built a low-noise optical fiber interferometer and investigated noise sources that affect the overall performance of the optical link. The frequency stability at the remote end has been measured using the clock laser of PTB’s Yb+ frequency standard operating at 344 THz. We show that the frequency of a frequency-stabilized fiber laser can be transmitted over a total fiber length of 146 km with a relative frequency uncertainty below 1×10−19, and short term frequency instability given by the fractional Allan deviation of σ y (τ)=3.3×10−15/(τ/s).
We have explored the performance of two ldquodark fibersrdquo of a commercial telecommunication fiber link for a remote comparison of optical clocks. These fibers establish a network in Germany that will eventually link optical frequency standards at PTB with those at the Institute of Quantum Optics (IQ) at the Leibniz University of Hanover, and the Max Planck Institutes in Erlangen (MPL) and Garching (MPQ). We demonstrate for the first time that within several minutes a phase coherent comparison of clock lasers at the few 10-15level can also be accomplished when the lasers are more than 100 km apart. Based on the performance of the fiber link to the IQ we estimate the expected stability for the link from PTB to MPQ via MPL that bridges a distance of approximately 900 km.
We have explored the performance of 2 "dark fibers" of a commercial telecommunication fiber link for a remote comparison of optical clocks. These fibers establish a network in Germany that will eventually link optical frequency standards at PTB with those at the Institute of Quantum Optics (IQ) at the Leibniz University of Hanover, and the Max Planck Institutes in Erlangen (MPL) and Garching (MPQ). We demonstrate for the first time that within several minutes a phase coherent comparison of clock lasers at the few 10(-15) level can also be accomplished when the lasers are more than 100 km apart. Based on the performance of the fiber link to the IQ, we estimate the expected stability for the link from PTB to MPQ via MPL that bridges a distance of approximately 900 km.
A global positioning system (GPS) carrier-phase frequency transfer link along a baseline of 450 km has been established and is characterized by comparing it to a phase-stabilized optical fiber link of 920 km length, established between the two endpoints, the Max-Planck-Institut für Quantenoptik in Garching and the Physikalisch-Technische Bundesanstalt in Braunschweig. The characterization is accomplished by comparing two active hydrogen masers operated at both institutes. The masers serve as local oscillators and cancel out when the double differences are calculated, such that they do not constitute a limitation for the GPS link characterization. We achieve a frequency instability of in 30 s and for long averaging times. Frequency comparison results obtained via both links show no deviation larger than the statistical uncertainty of . These results can also be interpreted as a successful cross-check of the measurement uncertainty of a truly remote end fiber link.
Chronometrie levelling [1-3] is a technique of deriving gravitational potential differences from clock frequency comparisons allowing the determination of height differences. Interferometric optical fibre links (IFL) [4] enable chronometric levelling between distant labs housing optical clocks [5]. An IFL is a phase stabilized telecom fibre link connection establishing a fixed optical phase relationship between two locations up to ~1000 km apart [6]. To perform a chronometric levelling campaign between the stationary optical clocks of the Physikalisch-Technische Bundesanstalt (PTB) and PTB's transportable Strontium clock [7] placed at the Max Planck Institute of Quantum Optics (MPQ) we have established a new 940 km long IFL between the two locations. At both link ends the frequencies of the clock lasers are compared to the 1,5 pm link transfer laser via fs-combs. To enable chronometric levelling experiments at the level of 10 cm height resolution, we aim a fractional frequency uncertainty of the frequency transfer of-18for averaging times of ~40 ks. To monitor the frequency transfer over the complete 940 km long fibre link the signal is sent back from the receiving end to the sender on a second fibre, which allows an out-of-loop characterization using data of the 1880 km loop. We study two different link setups, cf. Fig. 1a: i) a single-span loop configuration with the option to tap off the signal at MPQ with a passive frequency extraction unit [8]. This setup requires monitoring at the sending end only and allows us to investigate an ultralong IFL, even longer than the previous record [9]. And ii) an antiparallel configuration of two concatenated, individually stabilized interferometric fibre links. This setup offers lower instabilities due to a decreased delay-limit [10] but requires setting up and maintaining a stabilization system at both link ends. To compensate the attenuation of the fibres we used fibre Brillouin amplifier modules (FBAM) developed inhouse providing a typical gain of > 40 dB.
Optical clocks are considered as promising candidates for redefining the second in the International System of Units. Compared with microwave clocks, optical clocks are powerful tools for the fundamental research such as the constancy of the fundamental constants, the validity of Einstein’s theory of general relativity, and the predictions of quantum electrodynamics. Recently two research groups have demonstrated the optical clocks with an unprecedented precision level of 10-18, which is two orders better than the present primary frequency standard. Using two Sr optical clocks and three Cs fountain clocks, SYRTE group has demonstrated the definition of second with optical clocks.#br#For redefining the second with optical clocks in the future, the optical clocks from the remote laboratories should have a high precision and the frequency of the optical clocks need to be transferred over a long distance, with extremely high precision. Unfortunately the conventional means of frequency transfer such as two-way satellite time and frequency transfer can reach a 10-16 level in one day which is far below the requirement for an optical clocks. Various methods have been developed to transfer optical frequency signal via optical fibers. Especially a research group from Germany has achieved a frequency transfer stability of 10-19 level in hundreds of seconds with a fiber length of 1840 km.#br#We demonstrate the recent development of optical frequency transfer over a 70-km fiber spool at National Time Service Center. The measurement shows that the compensation for the fiber noise is close to the limitation induced by the fiber delay for the Fourier frequency from 1 Hz to 250 Hz. The transfer stability (Allan deviation) of the fiber link is 1.2×10-15 in 1 s averaging time, and 1.4×10-18 in 10000 s. A preliminary test of the optical frequency transfer over a 100-km spooled fiber is achieved with a stability of roughly one order worse than the 71 km result, 5×10-15 in 1 s.#br#We demonstrate a new scheme of remote compensation for optical frequency transfer via fibers against conventional local compensation method. This new scheme has the advantage of great simplification of the local site, which can find applications in massive extension of star network. The key feature is that we transfer the mixture of the round-trip signal and local reference to the remote user’s end via an auxiliary fiber. At remote site, the fiber noise is measured and compensated by AOM2 accordingly.#br#Transfer stabilities of 13×10-15 in 1 s averaging time and 4.8×10-18 in 10000 s are achieved with the remote fiber noise compensation via a 25 km fiber spool. The demonstrated transfer stability is comparable to that obtained by the local fiber noise compensation method.#br#The future star fiber network of optical frequency transfer can benefit from this method, because the simpler local setup is required and even can be shared in the central site for multitudinous remote users.