A decoding algorithm for linear codes that uses the minimum weight words of the dual code as parity checks is defined. This algorithm is able to correct beyond the half minimum distance and has the capability of including soft-decision decoding. Results on applying this algorithm to quadratic residue (QR) codes, BCH codes, and the Golay codes (with and without soft-decision decoding) are presented.
A decoding algorithm for linear codes that uses the minimum weight words of the dual code as parity checks is defined. This algorithm is able to correct beyond the half minimum distance and has the capability of including soft-decision decoding. Results on applying this algorithm to quadratic residue (QR) codes, BCH codes, and the Golay codes (with and without soft-decision decoding) are presented.
Iterative decoding methods have gained interest, initiated by the results of the so-called "turbo" codes. The theoretical description of this decoding, however, seems to be difficult. Therefore, we study the iterative decoding of block codes. First, we discuss the iterative decoding algorithms developed by Gallager (1962), Battail et al. (1979), and Hagenauer et al. (1996). Based on their results, we propose a decoding algorithm which only uses parity check vectors of minimum weight. We give the relation of this iterative decoding to one-step majority-logic decoding, and interpret it as gradient optimization. It is shown that the used parity check set defines the region where the iterative decoding decides on a particular codeword. We make plausible that, in almost all cases, the iterative decoding converges to a codeword after some iterations. We derive a computationally efficient implementation using the minimal trellis representing the used parity check set. Simulations illustrate that our algorithm gives results close to soft decision maximum likelihood (SDML) decoding for many code classes like BCH codes. Reed-Muller codes, quadratic residue codes, double circulant codes, and cyclic finite geometry codes. We also present simulation results for product codes and parallel concatenated codes based on block codes.
A non-soft decision decoding algorithm for binary linear block codes transmitted over AWGN channel is presented. Unlike soft decision decoding algorithms, the proposed algorithm does not computing weighted Hamming distances. Based on the majority of code word candidates from the hard decision decoding output, the proposed algorithm improves error-correcting performance by 1 dB of coding gain compared to that of hard decision decoding algorithms. Also, a schematic block diagram for finding the codeword of majority is developed. Furthermore, a comparison of hardware complexity is made between the computation of weighted Hamming distances and the finding of majority code word.
We present a new soft-decision majority decoding algorithm for Reed-Muller codes RM(r,m). First, the reliabilities of 2/sup m/ transmitted symbols are recalculated into the reliabilities of 2/sup m-r/ parity checks that represent each information bit. In turn, information bits are obtained by the weighted majority that gives more weight to more reliable parity checks. It is proven that for long low-rate codes RM(r,m), our soft-decision algorithm outperforms its conventional hard-decision counterpart by 10 log/sub 10/(/spl pi//2)/spl ap/2 dB at any given output error probability. For fixed code rate R and m/spl rarr//spl infin/, our algorithm increases almost 2/sup r/2/ times the correcting capability of soft-decision bounded distance decoding.
This dissertation deals with maximum-likelihood soft-decision decoding as well as suboptimal soft-decision decoding of linear block codes. We present three new decoding algorithms: $MA\sp*D,\ H\sp*,$ and Directed Search. The first algorithm, $MA\sp*D,$ is an instance of Algorithm $A\sp*$ that conducts heuristic search through a code tree of the transmitted code when the decoding problem is transformed into a problem of graph-search through a code tree. $MA\sp*D$ takes into consideration more properties of the code and is considerably more efficient than the original $A\sp*$ decoding algorithm presented by Han, Hartmann, and Chen in 1993. The second algorithm, $H\sp*,$ is a new decoding algorithm that determines the value of every component of a minimum-cost codeword by estimating the cost of the minimum-cost codeword, which has a fixed value at one of the k most reliable, linearly independent bit positions. The suboptimal version of this algorithm is combined with other decoding algorithms to reduce the search space during the decoding process. The third algorithm, Directed Search, is designed to enhance the performance of soft-decision decoding by searching in continuous space. This approach explores the search space between a given vector and the received vector and finds the codeword closest to the received vector in the space explored. We also present a novel and efficient hybrid decoding algorithm for (n, k) linear block codes. It hybridizes $MA\sp*D,\ H\sp*,$ and Directed Search algorithms, utilizing their strengths to make the decoding more efficient. Simulation results for this hybrid algorithm are presented for the (104,52) binary-extended quadratic residue code and for the (128,64), the (256, 131), and the (256, 139) binary-extended BCH codes. This hybrid algorithm can efficiently decode the (104,52) binary extended quadratic residue code and the (128,64) code for any signal-to-noise ratio and has near-optimal to optimal performance. Previously, no practical decoder could decode these two codes with such a performance for all signal-to-noise ratio ranges.
Binary cyclic codes achieve good error correction performance and allow the implementation of very simpleencoder and decoder circuits. Among them, BCH codesrepresent a very important class of t-error correcting codes, with known structural properties and error correction capability. Decoding of binary cyclic codes is often accomplished through hard-decision decoders, although it is recognized that softdecision decoding algorithms can produce significant coding gain with respect to hard-decision techniques. Several approaches have been proposed to implement iterative soft-decision decoding of binary cyclic codes. We study the technique based on “extended parity-check matrices”, and show that such method is not suitable for high rates or long codes. We propose a new approach, based on “reduced parity-check matrices” and “spread parity-check matrices”, that can achieve better correction performance in many practical cases, without increasing the complexity.