NeuroQuantology

Quasi-synaptic Effect to Control the Cold Matter Transfer

Guennadi A. Kouzaev, KARL J. SAND

Published Dec 18, 2007• 1 citation

Abstract

In this paper an electronically controlled cold atom transfer is considered. Two atom streams are guided by wires carrying the DC and RF currents. The trapping areas can touch each other under certain critical values of these currents. At the touching point the atoms are transferred from one wire to another that reminiscent the synaptic effect in the brain. The discovered effect is applicable in quantum interferometry and controlled atom transfer.

DOI: 10.14704/nq.2008.6.1.152

Related papers

INTER-WIRE TRANSFER OF COLD DRESSED ATOMS

Guennadi A. Kouzaev, KARL J. SAND

In this paper, the quantum "synaptic" effect is studied that arises between two cold atom streams guided by cylindrical crossed wires carrying static (DC) and radio-frequency (RF) currents. The potential barrier between the two orthogonal atom streams is controlled electronically and atoms can be transferred from one wire to another under certain critical values of the wires' RF and DC currents and the biasing field. The results are interesting in the study of quantum interferometry and quantum registering of cold atoms.

Modern Physics Letters BOct 30, 20075 citations

Quantum synapse for cold atoms

Guennadi A. Kouzaev, KARL J. SAND

In this paper, the quantum synaptic effect is studied that arisen in the system of two crossed wires excited by the static (DC) and radio-frequency (RF) currents. The potential barrier between the two orthogonal atom streams is controlled electronically and the atoms can be transferred from one wire to another under certain critical values of the RF and DC currents. The results are interesting in the study of quantum interferometry and quantum registering of cold atoms.

arXiv:quant-ph/0703189Mar 20, 20071 citation

Two-Wire Waveguide and Interferometer for Cold Atoms

Edward A. Hinds, Chris J. Vale, M. G. Boshier

A versatile miniature de Broglie waveguide is formed by two parallel current-carrying wires in the presence of a uniform bias field. We derive a variety of analytical expressions to describe the guide and present a quantum theory to show that it offers a remarkable range of possibilities for atom manipulation on the submicron scale. These include controlled and coherent splitting of the wave function as well as cooling, trapping, and guiding. In particular, we discuss a novel microscopic atom interferometer with the potential to be exceedingly sensitive.

arXiv:physics/0009096Physical Review LettersFeb 19, 2001141 citations

Guiding Neutral Atoms with a Wire

Johannes Hecker Denschlag, Donatella Cassettari, Jörg Schmiedmayer

We demonstrate guiding of cold neutral atoms along a current carrying wire. Atoms either move in Kepler-like orbits around the wire or are guided in a potential tube on the side of the wire which is created by applying an additional homogeneous bias field. These atom guides are very versatile and promising for applications in atom optics.

arXiv:quant-ph/9809076Physical Review LettersMar 8, 1999185 citations

Controlling Cold Atoms using Nanofabricated Surfaces: Atom Chips

R. Folman, P. Krüger, Donatella Cassettari +3 more

Atoms can be trapped and guided using nanofabricated wires on surfaces, achieving the scales required by quantum information proposals. These atom chips form the basis for robust and widespread applications of cold atoms ranging from atom optics to fundamental questions in mesoscopic physics, and possibly quantum information systems.

arXiv:quant-ph/9912106Physical Review LettersMay 15, 2000391 citations

On the Design and Simulation of Electromagnetic Traps and Guides for Ultra-Cold Matter

KARL J. SAND

The objective of this thesis is the design and simulation of new electromagnetic traps and guides for ultra-cold matter. The traps and guides are intended for future experiments with small amounts of alkali atoms to study the quantum-mechanical effects of condensation and coupling between trapped drops of cold matter.\n\nThe main results are with the development and simulation of new wire traps and guides based on the dressing effect realised in strong DC magnetic and RF fields of certain frequencies. Some designs are proposed using only trapping by the DC magnetic field.\n\nThe principal methodology used in the thesis is to first develop the necessary theory and design formulas to make an initial design, followed by analytical and numerical simulation of the effective trapping potential. This may be followed by optimization of the geometry and the DC driving currents to enhance the trapping performance of the structure.\n\nA wire carrying both DC and RF currents is surrounded by a cylindrical minimum potential manifold and can be used as a guide for cold atoms. Bias rings are necessary around the wire to avoid a potential minimum of zero and to move the resulting circular potential minimum up and down along the wire. The minimum potential surfaces around two crossed or two parallel wires touch each other for certain critical values of the DC currents in the two wires. The DC currents must be in opposite directions in two parallel wires. Equations are derived in Chapter 2 for the distance to the circular minimum potential manifold for a single wire, for two crossed wires and for two parallel wires. It is then explained how prospective cold atom transfer between two crossed wires can be achieved by changing the magnitudes of the RF currents in the bias rings around the wires. Electrically controlled atom transfer between two parallel wires does not seem to be practical.\n\nA four-wire cell trap made from two crossing pairs of parallel wires has been designed and optimized using a simple Matlab script. It can be used to trap both strong- and weak-field-seeking atoms and may possibly be used to study collision and entanglement between the two types of atoms. With only DC excitation the trap becomes a trap for weak-field-seeking atoms. It then unfortunately has a potential minimum of zero at its centre. A similar 3 x 3 wire dual-well trap has also been designed and optimized in Matlab. It is prospective for the study of entanglement of BEC matter placed in the two wells. A quite low potential barrier in the direction normal to the wireplanes when the two wells are merged could however entail that the trap is inadequate for this purpose or that additional bias fields are necessary.\n\nSeveral multi-wire cell-grids that may find use as part of a quantum register are also described. The cell-grids can be stacked in threedimensions and can trap both strong- and weak-field-seeking atoms. The optimization, also here performed in Matlab, showed weaknesses due to a lack of complexity. A different and better optimization technique is most likely necessary to improve the optimization further.\n\nScaling to micrometre and nanometre size is demonstrated in Chapter 3. When scaling to micrometre size thermally induced spin-flip transitions should be considered. Scaling to nanometre size demands that both thermally induced spin-flips and the effect of the Casimir-Polder force must be taken into account. The effect of the Casimir-Polder force is minimized by the use of carbon nanotubes as conductors. The minimum feasible trapping distance is expected to be no less than 100 nm from the surface of a carbon nanotube.\n\nA four micro-wire cell and a 3 x 3 micro-wire structure, both adapted for future realization on a micro-machined substrate, are given as examples of micrometre size structures. Several nanometre size structures are also demonstrated. It is shown that prospective atom transfer between two crossed nanotubes can be done essentially in the same way as for two crossed wires.\n\nA four-nanotube cell and several nanotube cell-grids are also exemplified. The depth of the trapping potential is found to be proportional to the RF frequency. If the RF frequency is increased then the DC current level must also increase to maintain the same DC current to angular frequency ratio. The depth of the trap is accordingly also proportional to the DC current level in the conductors. The depth of the trap is thus ultimately limited by the maximum conductor current.\n\nA quadrupolar trap similar to the well known Ioffe-Pritchard trap is studied in Chapter 4 with combined DC and RF current excitation of the bias rings. A non-uniform potential minimum is found around the local maximum at the centre of the trap, but this does not prevent the trap from being used to trap weak-field-seeking atoms. The potential maximum at the centre of the quadrupolar trap is more than sufficient for trapping strongfield- seeking atoms. The quadrupolar trap can therefore be used to trap both strong- and weak-field-seeking atoms if the DC bar currents are large enough. Simulations also indicate that the bias rings can be placed relatively closely together to compress clouds of cold atoms into successively smaller traps. As the gap distances become very small the B-field becomes very strong between the bias rings and there is a risk of dielectric breakdown.\n\nA metallic cylinder atom guide consisting of a cylinder with a small hole and an external wire is described analytically in Chapter 5 and simulation results from Amperes are compared favourably with the results of calculations in Matlab. It is found that there can only be a B-field zero at the centre of the hole in the cylinder when there is a second field zero further inside the cylinder. The barrier between the two field zeros typically increases in width with increasing cylinder radius and in height with decreasing cylinder radius for a given cylinder current (DC). The smallest cylinder had the highest barrier between the field zeros, but also required the highest DC current in the external wire. Bias rings around the guide must be centred on the hole in the cylinder and the DC ring currents and the spacing between the bias rings must be scaled by the same factor as the ring radius to maintain the same shape and height of the trapping potential along the centre of the hole. The cylinder guide looks promising as a hermetic guide for cold matter. Bias rings are required both to pump atoms along the guide and to remove the zero in the B-field inside the hole.

Jan 1, 20101 citation