Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Fast efficient Ca atomic resonance filter at 423 nm

Frederick G. Walther

Published Nov 15, 1992• 0 citations
Publisher

Abstract

An optically pumped active Ca atomic resonance filter is demonstrated, applicable to background-limited optical communications through scatter channels. In pump saturation, the filter should detect 50% of the incident 423-nm signal power with an internal photon gain of 6 and a response time of 10 micros, 2 orders of magnitude faster than a passive Ca filter. Response time of 100 micros has been demonstrated, limited by available pump power. The filter maintains the wide field of view and reduced solar background associated with atomic absorption at the Ca Fraunhofer line while permitting higher data rate communications.

DOI
10.1364/ol.17.001632

Related papers

Laser-pumped atomic vapor optical filters

T. M. Shay, Yun Chur Chung

Narrow-bandwidth optical sources are readily available. However, tunable narrow-bandwidth, wide field-of-view optical filters are not available. The laser-pumped atomic vapor optical filters presented here are in principle tunable narrow-bandwidth, wide field-of-view optical filters. These filters can simultaneously provide high resolution (0.001 nm), wide field-of-view (±90°), high quantum efficiency, and electrically tunable optical filtering. These devices are ideally suited for extracting weak narrow-bandwidth signals buried in strong nonresonant optical background radiation. Potential applications of these fitters include laser communications, laser radar, detection of Raman radiation, and atomic spectroscopy.

Conference on Lasers and Electro-Optics•Jan 1, 1986•2 citations

Atomic resonance filters

Jerry A. Gelbwachs

The atomic resonance filter (ARF) is an ultranarrowband (Q approximately 10/sup 5/-10/sup 6/), large-acceptance-angle, isotropic optical filter. These features make the device ideally suited for applications in which weak laser signals are detected against a continuum background. The filter properties arise from the physical processes of absorption, emission, and internal energy conversion in atomic vapors. The characteristics of the ARF are described and the underlying physics that governs the operation is discussed. Representative examples of passive, active, and IR filters are presented. A metastable ARF that offers improved solar background-limited performance by filtering signals at Fraunhofer wavelengths is described.>

IEEE Journal of Quantum Electronics•Jul 1, 1988•88 citations

4227-nm atomic filter with superior solar background rejection

Jerry A. Gelbwachs

A novel atomic resonance filter with powerful solar background rejection is proposed. The filter wavelength matches the g Fraunhofer line at 422.7 nm. Atomic filtering occurs within the singlet manifold of neutral calcium. Superior sunlight discrimination arises mainly from two factors: overlay with an intense Fraunhofer line and signal levels devoid of fine and hyperfine structures. The new filter should exhibit high throughput and low noise.

Optics Letters•Feb 15, 1990•11 citations

A Fraunhofer-wavelength magnetooptic atomic filter at 422.7 nm

Yat C. Chan, Jerry A. Gelbwachs

A demonstration of the first magnetooptic atomic filter that overlays a strong solar Fraunhofer line is reported. Compared with alkali magnetooptic filters, this filter enjoys a large reduction in solar interference and a significant decrease in the number of noise passbands. The filter utilizes the strong Ca(4p/sup 1/P/sub 1/-4s/sup 1/S/sub 0/) transition at 422.7 nm. Under the weak magnetic field experimental conditions, a maximum transmission efficiency of 55% and a symmetrical double-peaked transmission spectrum with 1.5 GHz wide passbands were observed. The filter's frequency response was measured with a laser intensity modulation technique. No falloff was observed at 176 MHz, the highest frequency available with the apparatus. Calculations indicate that further improvements in filter performance can be achieved by optimizing the magnetic field and the cell temperature.>

IEEE Journal of Quantum Electronics•Jan 1, 1993•38 citations

Fraunhofer/wavelength atomic resonance filter

Jerry A. Gelbwachs

The atomic resonance filter (ARF) is art ultra- high-Q (105–106) optical filter that is isotropic and insensitive to environmental factors and possesses a 180° acceptance angle.1 We are developing a novel ARF for satellite applications. Our filter operates in a Fraunhofer dip in the solar spectrum, thereby offering the key advantage of reduced solar background noise. Other important operational characteristics of the filter are: a projected conversion efficiency of blue-green light into the wavelength-shifted output light of ~90%, a 10-ns response time, and an output in the near UV, a spectral region that is efficiently detected by commercial large-area long-lived photomultiplier tubes.

Conference on Lasers and Electro-Optics•Apr 25, 1988•0 citations

Passive Fraunhofer-wavelength atomic filter at 4227 nm

Jerry A. Gelbwachs, Yat C. Chan

We have demonstrated 25% internal photon conversion efficiency of a new passive atomic filter. The signal wavelength matches an intense Fraunhofer line at 422.7 nm, thereby offering enhanced sunlight rejection. A quasimolecular interaction promotes rapid energy transfer between the 4p (1)P(1) level and the 4p (3)P(J) level of neutral calcium for wavelength shifting of 422.7-nm light into 657.3-nm emission. We discuss augmentation of the photon conversion efficiency by radiation trapping.

Optics Letters•Mar 1, 1991•13 citations
An optically pumped active Ca atomic resonance filter is demonstrated, applicable to background-limited optical communications through scatter channels. In pump saturation, the filter should detect 50% of the incident 423-nm signal power with an internal photon gain of 6 and a response time of 10 micros, 2 orders of magnitude faster than a passive Ca filter. Response time of 100 micros has been demonstrated, limited by available pump power. The filter maintains the wide field of view and reduced solar background associated with atomic absorption at the Ca Fraunhofer line while permitting higher data rate communications.
Narrow-bandwidth optical sources are readily available. However, tunable narrow-bandwidth, wide field-of-view optical filters are not available. The laser-pumped atomic vapor optical filters presented here are in principle tunable narrow-bandwidth, wide field-of-view optical filters. These filters can simultaneously provide high resolution (0.001 nm), wide field-of-view (±90°), high quantum efficiency, and electrically tunable optical filtering. These devices are ideally suited for extracting weak narrow-bandwidth signals buried in strong nonresonant optical background radiation. Potential applications of these fitters include laser communications, laser radar, detection of Raman radiation, and atomic spectroscopy.
The atomic resonance filter (ARF) is an ultranarrowband (Q approximately 10/sup 5/-10/sup 6/), large-acceptance-angle, isotropic optical filter. These features make the device ideally suited for applications in which weak laser signals are detected against a continuum background. The filter properties arise from the physical processes of absorption, emission, and internal energy conversion in atomic vapors. The characteristics of the ARF are described and the underlying physics that governs the operation is discussed. Representative examples of passive, active, and IR filters are presented. A metastable ARF that offers improved solar background-limited performance by filtering signals at Fraunhofer wavelengths is described.>
A demonstration of the first magnetooptic atomic filter that overlays a strong solar Fraunhofer line is reported. Compared with alkali magnetooptic filters, this filter enjoys a large reduction in solar interference and a significant decrease in the number of noise passbands. The filter utilizes the strong Ca(4p/sup 1/P/sub 1/-4s/sup 1/S/sub 0/) transition at 422.7 nm. Under the weak magnetic field experimental conditions, a maximum transmission efficiency of 55% and a symmetrical double-peaked transmission spectrum with 1.5 GHz wide passbands were observed. The filter's frequency response was measured with a laser intensity modulation technique. No falloff was observed at 176 MHz, the highest frequency available with the apparatus. Calculations indicate that further improvements in filter performance can be achieved by optimizing the magnetic field and the cell temperature.>
The atomic resonance filter (ARF) is art ultra- high-Q (105–106) optical filter that is isotropic and insensitive to environmental factors and possesses a 180° acceptance angle.1 We are developing a novel ARF for satellite applications. Our filter operates in a Fraunhofer dip in the solar spectrum, thereby offering the key advantage of reduced solar background noise. Other important operational characteristics of the filter are: a projected conversion efficiency of blue-green light into the wavelength-shifted output light of ~90%, a 10-ns response time, and an output in the near UV, a spectral region that is efficiently detected by commercial large-area long-lived photomultiplier tubes.