We have fabricated and characterized systems consisting of superconducting quantum bits (qubits) of the transmon type, coupled to a tunable transmission line resonator. The resonator consists of a superconducting quarter wavelength coplanar waveguide (CPW) resonator that is made tunable by terminating the transmission line to ground through a superconducting quantum interference device (SQUID). Here we present measurements on two devices where we observe Rabi oscillations as we drive the qubit, and vacuum Rabi splitting both as we tune the qubits into resonance with the resonator and as we tune the resonator into resonance with the qubits. We also observe coherent interaction between two resonant qubits. In addition, we demonstrate that we can calculate the response very accurately using a multilevel Hamiltonian.
We have fabricated and characterized systems consisting of superconducting quantum bits (qubits) of the transmon type, coupled to a tunable transmission line resonator. The resonator consists of a superconducting quarter wavelength coplanar waveguide (CPW) resonator that is made tunable by terminating the transmission line to ground through a superconducting quantum interference device (SQUID). Here we present measurements on two devices where we observe Rabi oscillations as we drive the qubit, and vacuum Rabi splitting both as we tune the qubits into resonance with the resonator and as we tune the resonator into resonance with the qubits. We also observe coherent interaction between two resonant qubits. In addition, we demonstrate that we can calculate the response very accurately using a multilevel Hamiltonian.
In this thesis, measurements on superconducting electrical circuits that exhibit quantum mechanical effects are presented. Nonlinear superconducting circuits can be regarded as artificial atoms with energy spectra that can be engineered. The artificial atoms can be used as quantum bits for quantum computation. By coupling the artificial atoms to the electromagnetic field inside a transmission line resonator, quantum optical effects can be studied in these electrical circuits.The possibility of using a frequency tunable transmission line resonators for coupling of superconducting quantum bits is investigated. Tunable superconducting resonators consisting of coplanar waveguide structures, terminated to ground in one end via a superconducting quantum interference device (SQUID), are characterized. By applying a magnetic field to the SQUID loop, the boundary condition of the resonator changes leading to a change in resonance frequency.A change of the resonance frequency by more than 250 linewidths is demonstrated. It is also demonstrated that the resonator can be tune by several hundred MHz on a time scale that is much shorter than the photon lifetime of the resonator.Circuits containing both one and two transmon qubits coupled to the resonator are characterized. Quantum mechanical interactions between the resonator and the qubits, in form of vacuum Rabi splitting, are observed. Coherent control of a single qubit coupled to the resonator is demonstrated by performing Rabi oscillations of the qubit. In the two qubit case, coherent interaction between the qubits is observed in terms of a nonlinear scaling of the coupling strength between the resonator and the collective two qubit system.Measurements on a strongly driven single Cooper-pair box, using a quantum capacitance readout, are also presented. A rich structure in the response is well explained in terms of longitudinal dressed states of the single-Cooper pair box.When measuring the response of a single-electron box, a gate dependent excess dissipation is observed. The dissipation is understood by considering the internal dynamics of the single electron box. The excess dissipation is modeled as an effective resistance named the Sisyphus resistance.
In this licentiate thesis design, fabrication, and measurements of tunable superconducting microwave transmission line resonators are described. The resonators are of quarter wavelength type were the tuning is achieved by changing one of the boundary conditions of the resonator through a tunable impedance. As tunable impedance the Josephson inductance in form of SQUIDs is used. The Josephson inductance can then be tuned by applying a magnetic field to the SQUID loop. A tuning range of 750 MHz for a 5 GHz resonator is achieved, and as a figure of merit it can be tuned over 200 line widths. The purpose of the tunable resonators is to use them for dynamic coupling of superconducting quantum bits, this requires that the resonators can be tuned fast on the timescale of the resonator-qubit coupling. To measure tuning speeds faster then the ring up time of the resonators a method that measures the leakage of energy out of a detuned resonator was developed. With this method a frequency shift of the energy stored in the resonator can be measured. A detuning of 330 MHz in less than 10 ns is demonstrated for a 4.5 GHz resonator with a quality factor of 104. Working in the few photon limit indicates that the devices can be used to change the frequency of individual photons, this is however still to be demonstrated. As a part of this work the dressed states of a superconducting charge qubit was also studied.
In a quantum computer, the information carriers, which are bits in ordinary computers, are implemented as devices that exhibit coherent superpositions of physical states and entanglement. Such components, known as quantum bits or qubits, can be realized with various different types of two-state quantum systems. Quantum computers will be built for computational speed, with hoped for applications especially in cryptography and in other tasks where classical computers remain inefficient. Circuit quantum electrodynamics (cQED) is a quantum-computer architecture which employs superconducting electronic components and microwave photon fields as building blocks. Compared to cavity quantum electrodynamics (CQED), where atoms are trapped in physical cavities, cQED is more attractive in that its qubits are tunable and conveniently integrable with the electronics already in use. This architecture has shown some of the most promising qubit designs, despite their coherence times reaching tens of microseconds, are still below the state of the art with spin qubits, which reach milliseconds. Coherence times are historically the most relevant parameters describing the fitness of a qubit, although these days not necessarily the limiting factor. This thesis presents a comprehensive set of theoretical and experimental methods for measuring the characteristic parameters of superconducting qubits. We especially study transmission-line-shunted plasma oscillation qubits, or transmons, and presents experimental results for a single sample. Transmon capacitively couples a superconducting quantum interference device (SQUID) with a coplanar waveguide (CPW) resonator, often with added frequency tunability utilizing an external magnet. The number of superconducting charge carriers tunnelled through a junction in the SQUID are used as qubit degrees of freedom. Readout of the qubit state is carried out by measuring transmission through the CPW. A cryogenic setup is employed with measurement and driving pulses delivered from microwave sources. Steady-state spectroscopy is employed to determine the resonance frequencies of the qubit and the resonator, qubit-resonator coupling constants, and the energy parameters of the qubit. Pulse-modulated measurements are employed to determine the coherence times of the qubit. The related analysis- and simulation programs and scripts are collected togithub.com/patomaki.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.
We introduce a superconducting coplanar waveguide, in the form of a ring resonator, as a quantum bus for circuit quantum electrodynamics (circuit QED). Due to its unique symmetry, the amplitude of the electromagnetic field inside is uniform along the resonator, which in principle leads to a location independent coupling between qubits and the resonator. For an experimental demonstration, we designed and fabricated a ring resonator capacitively coupled to two tunable Xmon superconducting qubits. We showed that nearly identical coupling was achieved between individual qubits and the resonator. In addition, the resonator was also used as a high quality quantum bus for generating Bell states between the qubits with a fidelity of F=98.6%, although an interference effect must be included for understanding the effective coupling between the two qubits. Our results suggest that ring resonators can be a useful addition to the toolbox of circuit QED.
In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.