In this paper, we propose a two-phase cooperative transmission strategy using decode-and-forward (DF) relaying and cooperative null-steering beamforming (CN-SB) to overcome the multi-eavesdropper problem that reduces the secrecy capacity of wireless networks. First, two groups are built from all available relays-the jamming group and the cooperating group. Second, based on the proposed cooperative transmission strategy, we develop a new relay assignment and power allocation scheme to achieve a higher secrecy rate. Simulation results show that the secrecy rate of the proposed scheme linearly proportional to the signal-to-noise ratio (SNR), which is significantly larger than that of the scheme in which all relays perform CN-SB simultaneously in high SNR regions.
In this paper, we propose a two-phase cooperative transmission strategy using decode-and-forward (DF) relaying and cooperative null-steering beamforming (CN-SB) to overcome the multi-eavesdropper problem that reduces the secrecy capacity of wireless networks. First, two groups are built from all available relays-the jamming group and the cooperating group. Second, based on the proposed cooperative transmission strategy, we develop a new relay assignment and power allocation scheme to achieve a higher secrecy rate. Simulation results show that the secrecy rate of the proposed scheme linearly proportional to the signal-to-noise ratio (SNR), which is significantly larger than that of the scheme in which all relays perform CN-SB simultaneously in high SNR regions.
This paper proposes a new joint cooperative beamforming and jamming (JCBJ) scheme for improving the physical layer security of decode-and-forward wireless networks where a source node transmits to its destination with the aid of multiple intermediate nodes in the presence of an eavesdropper. In the proposed JCBJ scheme, we select the intermediate nodes succeeding in source decoding as the relays to forward the source transmission simultaneously by employing a beamforming weight vector, and meanwhile, use the remaining ones as the friendly jammers to disturb the eavesdropper by sending artificial noise. In order to achieve the secrecy rate maximum, we further study on the power allocation among the source, relays, and jammers under two assumptions of the wiretap link's channel state information. We derive the closed-form optimal solutions by first allocating the transmit power at the source within different ranges to consider all the possible relay selection schemes in which different numbers of relays are employed, and then transforming the multivariable power allocation problem to a set of single-variable optimization subproblems. Our numerical results show the superiority of the proposed JCBJ scheme and the proposed power allocation strategies.
In this paper, we examine the physical layer security for cooperative wireless networks with multiple intermediate nodes, where the decode-and-forward (DF) protocol is considered. We propose a new joint cooperative beamforming and jamming (JCBJ) scheme to protect wireless communication against eavesdropping, where the intermediate nodes which successfully decode the source signal are selected as the relays for simultaneously forwarding the source signal by employing a weight vector, and meanwhile, the others are used to act as the friendly jammers for broadcasting artificial noise to disturb the eavesdropper. We further investigate the optimal power allocation among the source, relays and friendly jammers for maximizing the secrecy rate of the proposed JCBJ scheme and derive a closed-form sub-optimal solution. Simulation results show that the proposed JCBJ scheme achieves obviously higher secrecy rate than the conventional generalized singular-value-decomposition (GSVD) based beamforming and pure jamming schemes. Additionally, the proposed optimal power allocation scheme performs much better than the equal power allocation scheme in terms of secrecy rate.
Securing the wireless transmissions in the physical layer is a new perspective of security. In a wireless relay system, cooperative beamforming and jamming are two efficient schemes to improve the physical-layer security in the presence of passive eavesdroppers. However, in most works these two techniques are used in phase II of the cooperative transmission, which leaves the phase I out of protection. In this paper, we propose a joint cooperative beamforming and jamming scheme to enhance the security of a cooperative relay network, where a part of intermediate nodes adopt distributed beamforming while others jam the eavesdropper, simultaneously, such that both phases are secured. Since the instantaneous channel state information (CSI) of the eavesdropper may not be known, we propose a cooperative artificial noise transmission based secrecy strategy, subjected to the individual power constraint of each node. The beamformer weights and power allocation can be obtained by solving a second-order convex cone programming (SOCP) together with a linear programming problem. Simulations show the joint scheme greatly improves the security.
A wireless network with one source, one destination, one eavesdropper and multiple decode-and-forward (DF) relays is considered. A two-slot cooperative relaying scheme is proposed that targets at maximizing the secrecy rate. In the first slot, the source transmits the information bearing signal, and at the same time, it cooperates with the destination in jamming the eavesdropper without creating interference at the relay. In the second slot, one optimally selected relay retransmits the decoded source signal, and at the same time, it cooperates with the source to jam the eavesdropper without creating interference at the destination. For the beamforming, no eavesdropper channel information is required. Optimal relay selection and also optimal power allocation among the first/second slot data signal and jamming noise are proposed. It is shown that the system secrecy rate of the proposed scheme scales with the total system power, P0and the number of available relays, K, according to log2(1 + P0/8 log K) - 1.6252bps.
We consider a cooperative wireless network in the presence of one or more eavesdroppers, and exploit node cooperation for achieving physical (PHY) layer based security. Two different cooperation schemes are considered. In the first scheme, cooperating nodes retransmit a weighted version of the source signal in a decode-and-forward (DF) fashion. In the second scheme, referred to as cooperative jamming (CJ), while the source is transmitting, cooperating nodes transmit weighted noise to confound the eavesdropper. We investigate two objectives: i) maximization of the achievable secrecy rate subject to a total power constraint and ii) minimization of the total power transmit power under a secrecy rate constraint. For the first design objective, we obtain the exact solution for the DF scheme for the case of a single or multiple eavasdroppers, while for the CJ scheme with a single eavesdropper we reduce the multivariate problem to a problem of one variable. For the second design objective, existing work introduces additional constraints in order to reduce the degree of difficulty, thus resulting in suboptimal solutions. Our work raises those constraints, and obtains either an analytical solution for the DF scheme with a single eavesdropper, or reduces the multivariate problem to a problem of one variable for the CJ scheme with a single eavesdropper. Numerical results are presented to illustrate the proposed results and compare them to existing work.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.