Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Deceleration of a calcium atomic beam by a frequency-doubled diode laser

Artemio Scalabrin, Germano Woehl, G. A. Garcia, Edjar Martins Telles, Flávio C. Cruz, D. Pereira

Published Jul 6, 1999• 0 citations
Publisher

Abstract

Deceleration of an atomic beam of calcium was achieved by using the radiation of a frequency double diode laser at 845.2 nm. In order to enhance the violet beam generation the doubling crystal, KNbO3, is placed inside an external build-up cavity. The laser beam at 423 nm, counter- propagating with the atomic beam, is put into resonance with the 1S0 yields 1P1 transition of Ca. To keep the laser in resonance with the atomic transition during the cooling process, the Zeeman technique is used.

DOI
10.1117/12.358426

Related papers

Deceleration of a calcium atomic beam with a frequency-doubled diode laser

Germano Woehl, G A Garcia, Flávio C. Cruz +2 more

A calcium atomic beam has been decelerated by a single extended-cavity diode laser, frequency doubled to 423 nm. A potassium niobate crystal is placed in an external power buildup cavity, and the second-harmonic laser beam, counterpropagating with the atomic beam, is tuned into resonance with the strong 1S0-1P1 transition of calcium. For input power of 78 mW at 846 nm, we generate 22 mW at 423 nm after correction for the reflectivity of our cavity output coupler. To keep the atoms always in resonance during the deceleration process, the Zeeman tuning technique was used.

Applied Optics•Apr 20, 1999•7 citations

Laser cooling of Mg and Ca atomic beams

N. Beverini, E. Maccioni, D. Pereira +2 more

Laser deceleration was achieved by irradiating thermal calcium and magnesium atomic beams with a counterpropagating laser beam in resonance with the 1S0–1P1 transition. Zeeman tuning of the atomic absorption was used to enhance the population of cooled atoms. (AIP)

AIP conference proceedings•Jan 1, 1989•0 citations

Tunable 397 nm Light Source for Laser Cooling of Ca Ions Based on Frequency Doubling of Diode Laser

Kazuhiro Hayasaka, Masayoshi Watanabe, Hidetsuka Imajo +2 more

We have fabricated an rf ion trap and laser-cooling light sources to observe shelving transition in a single calcium ion. All the radiation required for laser cooling and observation of the transition can be prepared with diode lasers in this system. Continuous-wave radiation at 397 nm for laser cooling was generated by frequency doubling of a GaAlAs laser in an external enhancement cavity. As a preliminary experiment for observing the shelving transition, laser cooling of one hundred calcium ions was demonstrated using this radiation and another diode laser.

Japanese Journal of Applied Physics•Mar 1, 1994•10 citations

Deceleration, trapping, and two-photon cooling of calcium atoms

Reinaldo L. Cavasso Filho, Wictor C. Magno, Daniela A. Manoel +3 more

We report on a system for atomic beam deceleration and magneto-optical trapping of calcium atoms that uses the 1S0–1P1 transition, in which a single laser is used to trap and slow the atoms. The slower laser beam is focused near the magneto-optical trap’s center, which has a waist size much smaller than the atomic cloud such that its influence on the trapped atoms is greatly reduced. We also investigate the theoretical possibility of cooling by use of a two-photon (4s2)1S0–(4s5s)1S0 transition. Excitation near resonance with the 1P1 level results in an equilibrium temperature seven times smaller than the Doppler limit of the 1S0–1P1 transition.

Journal of the Optical Society of America B•May 1, 2003•12 citations

Blue laser for precision spectroscopy: toward optical frequency standard referenced to laser cooled calcium atoms

Vera Grishina

Optical frequency standards with the reference to a narrow electronic transition of a laser-cooled collection of neutral atomic particles are becoming essential tools of research in modern precision physics experiments. In the core of a building block of an optical frequency standard is the optical continuous wave laser that has a good spectral purity of the emitted light. Such a stable optical oscillator is highly desirable in high resolution spectroscopy, if it emits in a good quality beam at a short visible wavelength. This Master thesis explores efficient techniques for building such an optical frequency source intended for use in the cooling and trapping of Calcium atoms scheme. The strong dipole transition at the blue wavelength in the atomic Calcium is needed to reduce the kinetic energy of atoms by nearly six orders of magnitude. A further reduction in the thermal energy of the laser cooled atoms is required to locate with ultra-high precision the 400 Hz narrow clock transition of the stable 40Ca isotope. The experimental methods that achieve this and approach sub-microkelvin temperature of the laser cooled bosonic isotopes of alkaline earths are inspected. The blue laser with a uniform intensity distribution in the beam is useful to maintain the trapped number of cold atoms during these experiments. The spectroscopic properties of the relative transitions in Calcium atom are also reviewed following relevant publications in the area. The constructed blue laser can be used as a primary wavelength source in the lasers network for cooling and trapping of Calcium atoms. These experiments will constitute part of the project to build an optical atom clock referenced to 40Ca narrow linewidth transition. The blue laser is constructed by generating second harmonic in a Potassium Niobate crystal, which is temperature controlled to use a type-I noncritical phase-matching of the optical nonlinear process. The power of the intracavity-generated second harmonic depends on the resonance properties of the optical resonator where this nonlinear crystal is placed. The study is aimed at characterising the designed optical resonator and the experimental parameters that describe it. The formula is derived that relates the resonance power enhancement coefficient with finesse and the power coupling contrast of a passive optical cavity. The obtained relationship is verfied during the experiments. The produced efficiency of the intracavity second harmonic generation is approx. 0.0023 mWblue/(mWred)2. The research work also examines the noise characteristics of the infrared diode laser that is used as a pump source for the intracavity generated second harmonic and determines the spectroscopic precision of the produced blue light. The frequency locking experiment is analysed using the unbalanced scheme of the polarisation stabilisation technique. The designed optical buildup cavity became a part of the unbalanced frequency discriminator in such a scheme. The results demonstrate high gain of frequency noise suppression of the stabilised laser. The unbalanced arrangement of the H}ansch-Couillaud technique has been possible due to a very low amplitude noise of semiconductor lasers.

•Jan 1, 2008•0 citations

Calcium magneto-optical trap loaded from a decelerated atomic beam

Reinaldo L. Cavasso Filho, Daniela A. Manoel, Davi R. Ortega +3 more

We describe a new system for laser cooling and trapping of neutral Calcium atoms employing the ¹S0 -¹ P1 resonant transition at 423 nm. An on-axis magneto-optical trap (MOT) is loaded from a Zeeman decelerated atomic beam. When a single laser is used, in order to avoid perturbation of the trap by the deceleration laser beam, this one has been tightly focused near the MOT center, with a waist size much smaller than the atomic cloud. In order to test the efficiency of this novel technique, we have then employed a second, independent decelerating laser, with a profile mode matched to the atomic beam. For an oven temperature of 580±C this system can load 1.2 (2) x 10(7) atoms in 16 (1) ms. By the spatial extension of the atomic cloud the one dimension rms velocity was estimated to be 136 (12) cm/s, corresponding to a temperature of 9 (2) mK. The variation of the number of trapped atoms as a function of laser detuning and intensity, trap magnetic field gradient and oven temperature is analyzed. Spatial structures of the trapped atoms, like stable rings created by vortex forces, have been observed. This is the first time that these structures, already observed in alkali-metal elements, are reported in MOTs of alkaline-earth elements.

Brazilian Journal of Physics•Jun 1, 2003•3 citations
Deceleration of an atomic beam of calcium was achieved by using the radiation of a frequency double diode laser at 845.2 nm. In order to enhance the violet beam generation the doubling crystal, KNbO3, is placed inside an external build-up cavity. The laser beam at 423 nm, counter- propagating with the atomic beam, is put into resonance with the 1S0 yields 1P1 transition of Ca. To keep the laser in resonance with the atomic transition during the cooling process, the Zeeman technique is used.
A calcium atomic beam has been decelerated by a single extended-cavity diode laser, frequency doubled to 423 nm. A potassium niobate crystal is placed in an external power buildup cavity, and the second-harmonic laser beam, counterpropagating with the atomic beam, is tuned into resonance with the strong 1S0-1P1 transition of calcium. For input power of 78 mW at 846 nm, we generate 22 mW at 423 nm after correction for the reflectivity of our cavity output coupler. To keep the atoms always in resonance during the deceleration process, the Zeeman tuning technique was used.
We have fabricated an rf ion trap and laser-cooling light sources to observe shelving transition in a single calcium ion. All the radiation required for laser cooling and observation of the transition can be prepared with diode lasers in this system. Continuous-wave radiation at 397 nm for laser cooling was generated by frequency doubling of a GaAlAs laser in an external enhancement cavity. As a preliminary experiment for observing the shelving transition, laser cooling of one hundred calcium ions was demonstrated using this radiation and another diode laser.
We report on a system for atomic beam deceleration and magneto-optical trapping of calcium atoms that uses the 1S0–1P1 transition, in which a single laser is used to trap and slow the atoms. The slower laser beam is focused near the magneto-optical trap’s center, which has a waist size much smaller than the atomic cloud such that its influence on the trapped atoms is greatly reduced. We also investigate the theoretical possibility of cooling by use of a two-photon (4s2)1S0–(4s5s)1S0 transition. Excitation near resonance with the 1P1 level results in an equilibrium temperature seven times smaller than the Doppler limit of the 1S0–1P1 transition.
Optical frequency standards with the reference to a narrow electronic transition of a laser-cooled collection of neutral atomic particles are becoming essential tools of research in modern precision physics experiments. In the core of a building block of an optical frequency standard is the optical continuous wave laser that has a good spectral purity of the emitted light. Such a stable optical oscillator is highly desirable in high resolution spectroscopy, if it emits in a good quality beam at a short visible wavelength. This Master thesis explores efficient techniques for building such an optical frequency source intended for use in the cooling and trapping of Calcium atoms scheme. The strong dipole transition at the blue wavelength in the atomic Calcium is needed to reduce the kinetic energy of atoms by nearly six orders of magnitude. A further reduction in the thermal energy of the laser cooled atoms is required to locate with ultra-high precision the 400 Hz narrow clock transition of the stable 40Ca isotope. The experimental methods that achieve this and approach sub-microkelvin temperature of the laser cooled bosonic isotopes of alkaline earths are inspected. The blue laser with a uniform intensity distribution in the beam is useful to maintain the trapped number of cold atoms during these experiments. The spectroscopic properties of the relative transitions in Calcium atom are also reviewed following relevant publications in the area. The constructed blue laser can be used as a primary wavelength source in the lasers network for cooling and trapping of Calcium atoms. These experiments will constitute part of the project to build an optical atom clock referenced to 40Ca narrow linewidth transition. The blue laser is constructed by generating second harmonic in a Potassium Niobate crystal, which is temperature controlled to use a type-I noncritical phase-matching of the optical nonlinear process. The power of the intracavity-generated second harmonic depends on the resonance properties of the optical resonator where this nonlinear crystal is placed. The study is aimed at characterising the designed optical resonator and the experimental parameters that describe it. The formula is derived that relates the resonance power enhancement coefficient with finesse and the power coupling contrast of a passive optical cavity. The obtained relationship is verfied during the experiments. The produced efficiency of the intracavity second harmonic generation is approx. 0.0023 mWblue/(mWred)2. The research work also examines the noise characteristics of the infrared diode laser that is used as a pump source for the intracavity generated second harmonic and determines the spectroscopic precision of the produced blue light. The frequency locking experiment is analysed using the unbalanced scheme of the polarisation stabilisation technique. The designed optical buildup cavity became a part of the unbalanced frequency discriminator in such a scheme. The results demonstrate high gain of frequency noise suppression of the stabilised laser. The unbalanced arrangement of the H}ansch-Couillaud technique has been possible due to a very low amplitude noise of semiconductor lasers.
We describe a new system for laser cooling and trapping of neutral Calcium atoms employing the ¹S0 -¹ P1 resonant transition at 423 nm. An on-axis magneto-optical trap (MOT) is loaded from a Zeeman decelerated atomic beam. When a single laser is used, in order to avoid perturbation of the trap by the deceleration laser beam, this one has been tightly focused near the MOT center, with a waist size much smaller than the atomic cloud. In order to test the efficiency of this novel technique, we have then employed a second, independent decelerating laser, with a profile mode matched to the atomic beam. For an oven temperature of 580±C this system can load 1.2 (2) x 10(7) atoms in 16 (1) ms. By the spatial extension of the atomic cloud the one dimension rms velocity was estimated to be 136 (12) cm/s, corresponding to a temperature of 9 (2) mK. The variation of the number of trapped atoms as a function of laser detuning and intensity, trap magnetic field gradient and oven temperature is analyzed. Spatial structures of the trapped atoms, like stable rings created by vortex forces, have been observed. This is the first time that these structures, already observed in alkali-metal elements, are reported in MOTs of alkaline-earth elements.