Through photonic mechanisms based on near-field coupling, laser radiation can engage with resonant energy transfer in a variety of suitably designed materials and molecular structures. Energy that has been acquired, through the initial absorption of resonant laser light, undergoes transfer between chromophores only on the throughput of off-resonant light, the process known as laser-assisted resonance energy transfer. The comprehensive results that are presented here extend and generalize the theory for both single and dual beam configurations, producing results that are applicable to media of various types including doped crystals, heterogeneous multichromophore solids, and solutions. The detailed principles, here explained in terms of both energetics and optical selection rule criteria, are specifically illustrated for a variety of materials. It is shown how general application of the theory can facilitate the elucidation of experiments, by clearly interpreting the effects of laser polarization manipulation. On further analysis of the photophysical mechanisms it is also demonstrated that such effects represent an entirely practicable basis for optical switching and logic gate operation. The additional polarization selectivity afforded by a two-beam setup proves to allow the most complete system control. With such a configuration, there is considerable promise for the realization of new optically driven logic and molecular devices.
Through photonic mechanisms based on near-field coupling, laser radiation can engage with resonant energy transfer in a variety of suitably designed materials and molecular structures. Energy that has been acquired, through the initial absorption of resonant laser light, undergoes transfer between chromophores only on the throughput of off-resonant light, the process known as laser-assisted resonance energy transfer. The comprehensive results that are presented here extend and generalize the theory for both single and dual beam configurations, producing results that are applicable to media of various types including doped crystals, heterogeneous multichromophore solids, and solutions. The detailed principles, here explained in terms of both energetics and optical selection rule criteria, are specifically illustrated for a variety of materials. It is shown how general application of the theory can facilitate the elucidation of experiments, by clearly interpreting the effects of laser polarization manipulation. On further analysis of the photophysical mechanisms it is also demonstrated that such effects represent an entirely practicable basis for optical switching and logic gate operation. The additional polarization selectivity afforded by a two-beam setup proves to allow the most complete system control. With such a configuration, there is considerable promise for the realization of new optically driven logic and molecular devices.
In a molecular system of energy donors and acceptors, resonance energy transfer is the primary mechanism by means of which electronic energy is redistributed between molecules, following the excitation of a donor. Given a suitable geometric configuration it is possible to completely inhibit this energy transfer in such a way that it can only be activated by application of an off-resonant laser beam: this is the principle of optically controlled resonance energy transfer, the basis for an all-optical switch. This paper begins with an investigation of optically controlled energy transfer between a single donor and acceptor molecule, identifying the symmetry and structural constraints and analyzing in detail the dependence on molecular energy level positioning. Spatially correlated donor and acceptor arrays with linear, square, and hexagonally structured arrangements are then assessed as potential configurations for all-optical switching. Built on quantum electrodynamical principles the concept of transfer fidelity, a parameter quantifying the efficiency of energy transportation, is introduced and defined. Results are explored by employing numerical simulations and graphical analysis. Finally, a discussion focuses on the advantages of such energy transfer based processes over all-optical switching of other proposed forms.
The electronic transfer of energy from a donor particle to an acceptor is a mechanism that plays a key role in a wide range of optical and photophysical phenomena. The ability to exert control on this transfer is of immense importance. It now emerges that there are all-optical routes which can be introduced to achieve this very purpose. We demonstrate the possibility of promoting energy transfer, in the optical near field, that is rigorously forbidden (on geometric or symmetric grounds) in the absence of laser light. The effect operates through coupled stimulated Raman scattering by the donor-acceptor pair. The absorption of a photon takes place at one particle and stimulated emission at either, coupled with energy transfer between the pair. At this fundamental level, transfer phenomena arise for both single and dual input auxiliary beams. In the latter case the emitted photon may differ from the absorbed photon. In either situation energy transfer will not occur in the absence of auxiliary radiation, if either the donor or acceptor transition is single-quantum forbidden. By engaging input laser light, energy transfer may proceed through two or three quantum allowed transitions. The results for this novel type of optical control suggest transfer efficiency levels comparable to Förster transfer. Many applications are envisaged, chief of which is the potential for all-optical switching.
Resonance energy transfer (RET) is a near-field mechanism for propagating optical energy between particles with suitably matching frequency response. The process communicates electronic excitation between suitably disposed (donor and acceptor) dipoles in close proximity, activated on excitation of the donor. In a multi-component system the transfer of excitation between any given donor and acceptor is usually passive, and it competes with loss mechanisms such as radiative decay and the possibility of transfer to one or more other acceptors. It thus appears that any potential exploitation of RET for optical switching is compromised by the innate passivity of the process. Now it emerges that there is a direct, all-optical route to introduce the necessary control. In a system constructed to satisfy frequency-matching conditions, but designedly to inhibit RET by geometric configuration, the throughput of laser pulses can facilitate energy transfer processes that would otherwise be forbidden, by laser-assisted resonant energy transfer. Suitably configuring an arrangement of transition dipoles, it proves possible to design parallel planar arrays of optical donor and acceptor particles such that the transfer of energy from any single donor, to its counterpart in the opposing plane, can be switched by appropriate laser radiation. As the energy transfer is itself mediated electromagnetically, the device operates as an optical transistor. For simplicity, a pair of two-dimensional arrays is envisaged, each consisting of equally spaced, identical particles arranged on a square lattice. A detailed appraisal of the system, including a consideration of competing processes, suggests that this configuration offers a new basis for the design of optically activated nanoscale transistor arrays.
Interactions between light and molecular matter featuring photon absorption are commonly associated with excitation of individual chromophores. Subsequent relaxation is achieved through numerous mechanisms, such as scattering and energy transfer to neighbouring chromophores. The efficiency of such processes depends on many factors, including the intensity and wavelength of the optical input, the absorption cross-section of the molecule and the relative orientation of molecular components. New photonic materials are developed on the principle that such factors are controllable, duly tailoring the system to suit new technological applications. The parameters that determine the linear response in multicomponent materials are typically assessed within the theoretical framework of classical optics. However, with improved interest and capability in fabricating nanoscale structures (especially those that exhibit quantum effects), it is becoming increasingly relevant to develop theory that more faithfully represents how individual photons engage with matter. In such constructs, the interaction of materials with optical waves and photons is highly dependent on local molecular environment, therefore surrounding structures and ancillary species exert forms of influence on the photophysical processes inherent within dielectric media. At optical wavelengths where the secondary structure displays little intrinsic optical absorption, the role of such components is often interpreted as modifying the input through a corrective local index of refraction. Although expedient in the discussion of bulk properties of a macroscopic medium, it is reasonably supposed at a local chromophore-photon level that optical mechanisms operate in a different fashion. Using a fully quantized approach to the representation of local molecular electronic structure and electrodynamics, this research develops rigorous theory and a corresponding physical interpretation of how photon absorption, scattering and energy transfer are modified by vicinal, non-absorbing chromophores. The results provide insight into the mechanisms achieved within multi-chromophore systems, highlighting factors that assist in the optimization of optical characteristics in designer materials.
In the optical excitation of many nanoscale systems, the primary result of photon absorption is an electronic excitation that is typically followed by ultrafast relaxation processes. The losses associated with such relaxation generally produce a partial degradation of the optical energy acquired, before any ensuing photon emission occurs. Recent work has shown that the intensity and directional character of such emission may be significantly influenced through engagement with a completely off-resonant probe laser beam of sufficient intensity: the mechanism for this optical coupling is a secondorder nonlinearity. It is anticipated that the facility to actively control fluorescent emission in this way may lead to new opportunities in a variety of applications where molecular chromophores or quantum dots are used. In the latter connection it should prove possible to exploit the particle size dependence of the nonlinear optical dispersion, as well as that of the emission wavelength. Specific characteristics of the effect are calculated, and suitable experimental implementations of the mechanism are proposed. We anticipate that this all-optical control device may introduce significant new perspectives to fluorescence imaging techniques and other analytical applications.
The theory of non-resonant optical processes with intrinsic optical nonlinearity, such as harmonic generation, has been widely understood since the advent of the laser. In general, such effects involve multiphoton interactions that change the population of each input optical mode or modes. However, nonlinear effects can also arise through the input of an off-resonant laser beam that itself emerges unchanged. Many such effects have been largely overlooked. Using a quantum electrodynamical framework, this review provides detail on such optically nonlinear mechanisms that allow for a controlled increase or decrease in the intensity of linear absorption and fluorescence and in the efficiency of resonance energy transfer. The rate modifications responsible for these effects were achieved by the simultaneous application of an off-resonant beam with a moderate intensity, acting in a sense as an optical catalyst, conferring a new dimension of optical nonlinearity upon photoactive materials. It is shown that, in certain configurations, these mechanisms provide the basis for all-optical switching, i.e., the control of light-by-light, including an optical transistor scheme. The conclusion outlines other recently proposed all-optical switching systems.