We propose a scheme of quantum computation with nonlinear quantum optics. Polarization states of photons are used for qubits. Photons with different frequencies represent different qubits. Single qubit rotation operation is implemented through optical elements like the Faraday polarization rotator. Photons are separated into different optical paths, or merged into a single optical path using dichromatic mirrors. The controlled-NOT gate between two qubits is implemented by the proper combination of parametric up and down conversions. This scheme has the following features: (1) No auxiliary qubits are required in the controlled-NOT gate operation; (2) No measurement is required in the course of the computation; (3) It is resource efficient and conceptually simple.
We propose a scheme of quantum computation with nonlinear quantum optics. Polarization states of photons are used for qubits. Photons with different frequencies represent different qubits. Single qubit rotation operation is implemented through optical elements like the Faraday polarization rotator. Photons are separated into different optical paths, or merged into a single optical path using dichromatic mirrors. The controlled-NOT gate between two qubits is implemented by the proper combination of parametric up and down conversions. This scheme has the following features: (1) No auxiliary qubits are required in the controlled-NOT gate operation; (2) No measurement is required in the course of the computation; (3) It is resource efficient and conceptually simple.
This Spotlight aims to provide a general introduction to linear and nonlinear optical components that are frequently used to implement the protocols for quantum computation and communication. The role of each optical element is described briefly, and it is shown that these optical elements can be combined to constitute quantum circuits for performing various quantum computing and communication tasks. Present challenges and future scopes are also mentioned briefly. Specifically, after introducing the qubit, it is stated that a quantum gate is a device that transforms a quantum state into another quantum state. Thus, most of the optical components (e.g., a beamsplitter, a wave plate, a mirror, a polarizing beamsplitter) can be viewed as quantum gates because each of these optical elements can transform a quantum state into another quantum state. This fact is the basis for constructing useful quantum circuits using optical elements. Finally, a few proposals for optical realizations of schemes for quantum communication and computation are described.
In classical computation and communication, we use classical gates and bits. Similarly, in quantum computation and communication, we use their quantum analogs, i.e., quantum gates and qubit(s) [quantum bit(s)]. We have already mentioned that a bit can be realized in various ways. In the same way, a qubit can also be realized in various ways, and accordingly, corresponding quantum gates that would operate on qubits can also be realized in various ways. Here, we focus on a specific implementation: optical implementation, where qubits are realized using photons and quantum gates, and circuits are realized using various optical components. Specific merits of this realization lie in the following facts: (i) in quantum communication we need to transmit qubits from one location to the other, and transmission of photons is easier than any other realization of qubits; (ii) the effect of the environment (e.g., external electric and magnetic fields) on photons is less compared to any other implementations of qubits; and (iii) integrated optics are already a well-developed field. Keeping these points in mind, this Spotlight describes basic optical elements and how to use those elements to implement various schemes of quantum computation and communication. We will mostly describe realizations using bulk optics. However, in most cases, it is not difficult to transform these bulk-optics-based realizations into integrated optics. To begin with, in Section 1.1, we formally define a qubit and describe two alternative ways of realizing a qubit using a photon.
The first section of the work investigates light modes as a means of implementing optical qubits and qudits. The modes considered are polarization mode, path mode, transverse spatial mode, frequency mode, temporal bin-mode and temporal mode. Subsequently, mathematical model of linear optical elements like beam splitters (BS) and phase shifters are deduced and their capability of representing any single qubit optical gate is exposed. Finally Knill, Laflamme and Milburn (KLM) method of using linear optical elements to promote nonlinear operations based on nonlinear (nondeterministic) sign-flip gate (NS) is explained, and designs of two qubits conditional sign flip gate (c-z1/16) and CNOT gate, both based on KLM method, are demonstrated. So, universal set of quantum gates based on linear optics is possible.
We introduce a scheme for linear optics quantum computation, that makes no use of teleported gates, and requires stable interferometry over only the coherence length of the photons. We achieve a much greater degree of efficiency and a simpler implementation than previous proposals. We follow the "cluster state" measurement based quantum computational approach, and show how cluster states may be efficiently generated from pairs of maximally polarization entangled photons using linear optical elements. We demonstrate the universality and usefulness of generic parity measurements, as well as introducing the use of redundant encoding of qubits to enable utilization of destructive measurements--both features of use in a more general context.
We suggest an efficient scheme for quantum computation with linear optical elements, where the qubits are encoded in single photon states. The scheme reduces the resources required per logical gate by several orders of magnitude, compared to an earlier proposal of Knill, Laflamme, and Milburn, while the resource overhead per gate is independent of the length of the computation. A central feature of the scheme, enabling these improvements, is the prior construction of a "linked" photon state designed according to the particular quantum circuit one wishes to process. Once this state has been successfully prepared, the computation is pursued deterministically by a sequence of teleportation steps.
By employing displacement operations, single-photon subtractions, and weak cross-Kerr nonlinearity, we propose an alternative way of implementing several universal quantum logical gates for all-optical hybrid qubits encoded in both single-photon polarization state and coherent state. Since these schemes can be straightforwardly implemented only using local operations without teleportation procedure, therefore, less physical resources and simpler operations are required than the existing schemes. With the help of displacement operations, a large phase shift of the coherent state can be obtained via currently available tiny cross-Kerr nonlinearity. Thus, all of these schemes are nearly deterministic and feasible under current technology conditions, which makes them suitable for large-scale quantum computing.
If suitable quantum optical interactions were available, transforming the field mode operators in a nonlinear fashion, the all-photonics platform could be one of the strongest contenders for realizing a quantum computer. While single-photon qubits may be processed directly, “brighter” logical qubits may be embedded in individual oscillator modes, using so-called bosonic codes, for an in-principle fault-tolerant processing. In this paper, we show how elements of all-optical, universal, and fault-tolerant quantum computation can be implemented using only beam splitters together with single-mode cubic phase gates in reasonable numbers, and possibly off-line squeezed-state or single-photon resources. Our approach is based on a decomposition technique combining exact gate decompositions and approximate Trotterization. This allows for efficient decompositions of certain nonlinear continuous-variable multimode gates into the elementary gates, where the few cubic gates needed may even be weak or all identical, thus facilitating potential experiments. The final gate operations include two-mode controlled phase rotation and three-mode Rabi-type Hamiltonian gates, which are shown to be employable for realizing high-fidelity single-photon two-qubit entangling gates or creating high-quality Gottesman-Kitaev-Preskill states. We expect our method to be of general use with various applications, including those that rely on quartic Kerr-type interactions. Published by the American Physical Society 2024