Dispersion properties of an optical medium can be greatly changed using electromagnetically induced transparency (EIT) and other nonlinear effects. Thus, the group velocity of light pulse can be much smaller (greater or even negative) than light speed in vacuum, which is called slow (fast) light. Slow and fast light are very useful in optical processing, such as optical buffer, switching, and storage devices. Usually, slow and fast light cannot be generated simultaneously in the same medium. In this paper, we propose applicable level structures to generate controllable slow and fast light simultaneously at two frequencies, with the same polarization.
Dispersion properties of an optical medium can be greatly changed using electromagnetically induced transparency (EIT) and other nonlinear effects. Thus, the group velocity of light pulse can be much smaller (greater or even negative) than light speed in vacuum, which is called slow (fast) light. Slow and fast light are very useful in optical processing, such as optical buffer, switching, and storage devices. Usually, slow and fast light cannot be generated simultaneously in the same medium. In this paper, we propose applicable level structures to generate controllable slow and fast light simultaneously at two frequencies, with the same polarization.
The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.
The two-level atom can, for good reason, be considered the basic material structure for the study of quantum optics [1]. The two-level atom has played a fundamental role in studies of physical processes, including self-induced transparency (SIT), photon echoes, optical nutation, saturation spectroscopy, and, most recently, slow- and fast-light research. This latter field has recently been the subject of great activity, as researchers have learned how to utilize various physical processes to exert control over the velocity of propagation of light pulses through material systems [2]. This interest stems both from the intellectual intrigue in situations in which the velocity of light can be speeded up or slowed down by many orders of magnitude and the promise that such techniques might be useful for applications in fields such as telecommunications and optical computing [3‐6]. Most of the recent work in this field has made use of the process of electromagnetically induced transparency (EIT) to induce a narrow transparency region in an otherwise highly absorbing optical material [7, 8]. The rapid variation of the refractive index n associated with this transparency window then leads to a strong modification of the group velocity n g in accordance with the standard relation
Fast or slow light propagation means that the group velocity of a quasi-monochromatic light pulse propagating in a resonant medium can be significantly faster or slower than the light speed in a vacuum. Since the end of the last century and the beginning of this century, studies on this subject have attracted a great deal of interest. Remarkable progress has been achieved, based on various nonlinear optical interactions in resonant media. The fundamental research on this subject can enrich our understanding of special relativity and causality in physics. On the other hand, those mechanisms and techniques developed for fast and slow light propagation have provided the potential for many future applications, such as optical buffers and variable delay lines for optical networks, optical computing, optical telecommunications, optical data storage, and signal processing.
The ability to manipulate the speed of light has recently become one of the most exciting emergent topics in optics. There are several experimental demonstrations showing the capability to slow down light more than six orders of magnitude in a variety of media, ranging from atomic vapor, solid state crystal, to semiconductors. These results have led to intensive research into new materials, devices, and system studies that examine their impact to new applications. It is believed that we are on the verge of a dramatic change in the way we envision and construct communication, processing and control systems. One direct application of slow and fast light devices is in the area of communications. One grand challenge remaining in information technology today is to store and buffer optical signals directly in optical format. As such, optical signals must be converted to electronic signals to route, switch, or be processed. This resulted in significant latencies and traffic congestions in current networks. In addition, keeping the data in optical domain during the routing process can greatly reduce the power, complexity and size of the routers. To this end, a controllable optical delay line can effectively function as an optical buffer, and the storage is proportional to the variability of the group velocity. In addition to optical buffers, slow and fast light devices can be used as tunable true-time delay elements in microwave photonics, which are important for remotely controlling phased array antenna. Other novel applications include nonlinear optics, optical signal processing, and quantum information processing. There are various approaches that can be used to vary the optical group velocity. Ultraslow or fast group velocity may result from a large material dispersion, waveguide dispersion, or both. In this paper, the authors provide a review of recent progress of slow and fast light using semiconductor devices. Specifically, they will discuss results obtained using semiconductor quantum-well/quantum-dot absorber and optical amplifiers. Slow and fast light are controllable electrically by changing the bias current or voltage as well as optically by changing the pump laser intensity and wavelength. Delay-bandwidth tradeoff and other figures of merits are analyzed
Research into slow light began theoretically in 1880 with the paper [1] of H A Lorentz, who is best known for his work on relativity and the speed of light. Experimental work started some 60 years later with the work of S L McCall and E L Hahn [2] who explored non-linear self-induced transparency in ruby. This field of research has burgeoned in the last 10 years, starting with the work of L Vestergaard Hau and coworkers on slow light via electromagnetically induced transparency in a Bose–Einstein condensate [3]. Many groups are now able to slow light down to a few metres per second or even stop the motion of light entirely [4]. Today, slow light – or more often `slow and fast light' – has become its own vibrant field with a strongly increasing number of publications. In broad scope, slow light research can be categorized in terms of the sort of physical mechanism used to slow down the light. One sort of slow light makes use of material dispersion. This dispersion can be the natural dispersion of the ordinary refractive index or can be the frequency dependence of some nonlinear optical process, such as electromagnetically induced transparency, coherent population oscillations, stimulated light scattering, or four-wave mixing processes. The second sort of slow light makes use of the wavelength dependence of artificially structured materials, such as photonic crystals, optical waveguides, and collections of microresonators. Material systems in which slow light has been observed include metal vapours, rare-earth-doped materials, Raman and Brillioun gain media, photonic crystals, microresonators and, more recently, metamaterials. A common feature of all of these schemes is the presence of a sharp single resonance or multiple resonances produced by an atomic transition, a resonance in a photonic structure, or in a nonlinear optical process. Current applications of slow light include a series of attractive topics in optical information processing, such as optical data storage, optical memories, quantum information devices, and optical communication systems in which the use of slow light will allow all-optical processing with less wasted heat. To implement these applications, devices such as buffers, memories, interferometers and switches that utilize slow light need to be developed. Future challenges include the need for improved coupling of light into slow light modes, overcoming propagation losses, and mitigating the influence of large dispersion of the group velocity. The collection of papers in this special issue of Journal of Optics features a broad spectrum of articles that highlight actual developments in many of the material types and schemes described above. It represents therefore an excellent up to date snapshot of the current state of the field of slow light research. References [1] Lorentz H A 1880 Uber die Beziehung zwischen der Fortpflanzung des Lichtes und der Körperdichte Wiedemann Ann. 9 641–64 [2] McCall S L and Hahn E L 1967 Self-induced transparency by pulsed coherent light Phys. Rev. Lett. 18 908–11 [3] Vestergaard Hau L, Harris S E, Dutton Z and Behroozi C H 1999 Nature 397 594 [4] Philips D F, Fleischhauer A, Mair A, Walsworth R L and Lukin M D 2001 Storage of light in atomic vapor Phys. Rev. Lett. 86 783–6
The propagation of light in dispersive media is a subject of fundamental as well as practical importance. In recent years attention has focused in particular on how refractive index can vary with frequency in such a way that the group velocities of optical pulses can be much greater or much smaller than the speed of light in vacuum, or in which the refractive index can be negative. Treating these topics at an introductory to intermediate level, Fast Light, Slow Light and Left-Handed Light focuses on the basic theory and describes the significant experimental progress made during the past decade. The book pays considerable attention to the fact that superluminal group velocities are not in conflict with special relativity and to the role of quantum effects in preventing superluminal communication and violations of Einstein causality. It also explores some of the basic physics at the opposite extreme of very slow group velocities as well as stopped and regenerated light, including the concepts of electromagnetically induced transparency and dark-state polaritons. Another very active aspect of the subject discussed concerns the possibility of designing metamaterials in which the refractive index can be negative and propagating light is left-handed in the sense that the phase and group velocities are in opposite directions. The last two chapters are an introduction to some of the basic theory and consequences of negative refractive index, with emphasis on the seminal work carried out since 2000. The possibility that "perfect" lenses can be made from negative-index metamaterials-which has been perhaps the most controversial aspect of the field-is introduced and discussed in some detail.