Purcell effect is a powerful tool to efficiently collect single photons emitted by semiconductor quantum dots. However, it is common to observe a degraded single photon purity when a quantum dot is inserted in an optical microcavity. Here, we investigate the role of the cavity coupling on the single photon purity for a quantum dot deterministically coupled to a pillar cavity mode. We show that the degradation of the purity cannot be attributed to cavity feeding effects but is fully explained by recapture processes. A good single photon purity is therefore easily restored using an intra-dot excitation scheme.
Purcell effect is a powerful tool to efficiently collect single photons emitted by semiconductor quantum dots. However, it is common to observe a degraded single photon purity when a quantum dot is inserted in an optical microcavity. Here, we investigate the role of the cavity coupling on the single photon purity for a quantum dot deterministically coupled to a pillar cavity mode. We show that the degradation of the purity cannot be attributed to cavity feeding effects but is fully explained by recapture processes. A good single photon purity is therefore easily restored using an intra-dot excitation scheme.
We observe antibunching in the photons emitted from a strongly coupled single quantum dot and pillar microcavity in resonance. When the quantum dot was spectrally detuned from the cavity mode, the cavity emission remained antibunched, and also anticorrelated from the quantum dot emission. Resonant pumping of the selected quantum dot via an excited state enabled these observations by eliminating the background emitters that are usually coupled to the cavity. This device demonstrates an on-demand single-photon source operating in the strong coupling regime, with a Purcell factor of 61+/-7 and quantum efficiency of 97%.
In 1946, E. M. Purcell predicted that the radiative lifetime of an emitter is not an intrinsic property but can be modified by structuring the surrounding electromagnetic field [36]. By inserting a semiconductor quantum dot (QD) in an optical cavity, one can accelerate or inhibit its spontaneous emission. In the present article, we show that the QD spontaneous emission can be deterministically controlled to fabricate bright sources of quantum light. QDs in cavities: basics, motivation, first demonstrations Light-matter coupling We note f the ground state of the QD and e its excited state. For a cavity mode close to resonance with the QD optical transition, we consider only the states with 0 or 1 photon in the cavity mode. The states ∣ e, 0〉 and ∣ f, 1〉 are coupled through light–matter interaction, with a constant g , where h g = ∣〈 e, 0∣ Ed ∣ f, 1∣, with d the dipole of the optical transition e → f and E the electric field at the QD position. Each of the states ∣ e, 0 > and ∣ f, 1 > are also coupled to continua of states: continuum of the free-space optical mode, phonons of the semiconductor matrix, etc. [4]. Here, we consider only the coupling to the continuum of the free-space optical mode, related to the cavity losses, with a constant γ c . When g << γ c , the photon emitted by the recombination of an exciton efficiently escapes outside the cavity. The QD optical transition radiative recombination rate can be accelerated (Purcell effect) or inhibited.
Semiconductor quantum dots (QDs) coupled with optical microcavities provide an excellent platform for generating high-performance single-photon sources. However, the current microcavity structures are difficult to solve the tradeoff between single-photon purity and indistinguishability without additional filtering, due to challenges in suppressing broad phonon sideband spectrum and two-photon emission in the practical experiments. To address these issues, we have developed a novel asymmetric microcavity that supports two nondegenerate polarized modes, both resonant with a single quantum dot. One cavity mode is broadband and is used for excitation to reduce two-photon emission intensity, while the other is narrowband and is used for collection to enhance the indistinguishability of single-photon sources. This asymmetric microcavity also has the ability to overcome at least half of the photon efficiency loss under polarization filtering. Moreover, our model has employed an excitation pulse that resonates with cavity modes eliminating spectral distortion of intracavity fields, and efficiently achieving deterministic population inversion of QDs compared to an elliptical cavity. Our scheme paves the way to develop the excellent performance single-photon sources with higher brightness, near-unity purity, and indistinguishability without any additional filtering in practical experiments.
In the pursuit of developing a quantum information network, photons appear to be the most convenient carriers to interconnect distant ports. The need to get on-demand single photons that is one and only one photon, with a high reliability, is the main driving force for the development of bright solid-state sources. One important parameter is the brightness defined as the probability that one collected pulse contains a single photon. For some applications like quantum information processing or long distance quantum communications, the emitted single photons must be also indistinguishable, so that can make use of their quantum interference to implement effective photon-photon interactions. To reach the ideal source of single and indistinguishable photons, different systems are explored : defects in diamond (NV centers), trapped atoms or ions, single molecules or semiconductor quantum dots.By coupling a semiconductor quantum dot to an optical cavity, the spontaneous emission of the emitter can be modified to obtain bright single-photon sources. An innovative technique was developed by Pr. Pascale Senellart and her team at the Laboratory of Photonics and Nanostructures (LPN) from CNRS that allows making such sources in a very reproducible way.This work explores the performance of single quantum dot coupled to micropillars. Various techniques are used in order to increase the single photon purity and indistinguishability while keeping a high source brightness. First, the cavity was modified using an adiabatic architecture such that a strong acceleration of the spontaneous emission was implemented. Then, a technique to apply an electric bias on the micropillars has been developed. The combination of the electric bias with a resonant optical excitation of the quantum dot allows to generation purely indistinguishable photons with a high brightness.The results developed in this thesis open a vast field of novel applications in quantum technologies, from quantum cryptography, metrology to quantum imaging.
We report on the observation of bright emission of single photons under pulsed resonance fluorescence conditions from a single quantum dot (QD) in a micropillar cavity. The brightness of the QD fluorescence is greatly enhanced via the coupling to the fundamental mode of a micropillar, allowing us to determine a single photon extraction efficiency of (20.7 ± 0.8) % per linear polarization basis. This yields an overall extraction efficiency of (41.4 ± 1.5) % in our device. We observe the first Rabi-oscillation in a weakly coupled quantum dot-micropillar system under coherent pulsed optical excitation, which enables us to deterministically populate the excited QD state. In this configuration, we probe the single photon statistics of the device yielding g(2)(0) = 0.072 ± 0.011 at a QD-cavity detuning of 75 μeV.
In this work, we show that this drawback can be overcome by coupling an optical cavity in the form of a 'photonic molecule' to a single QD. Two coupled identical pillars are etched in a semiconductor planar microcavity, using an optical lithography method that ensures a deterministic coupling to the optical transitions of a pre-selected quantum dot. Acceleration of spontaneous emission ensures that most entangled photon pairs are emitted into two cavity modes, while improving the indistinguishability of the two optical recombination paths.