The theory of ghost imaging is examined by taking into account the quantum state of the light source explicitly. It is proved that ghost images can be obtained by any light source that is non-Poissonian. It is also shown that ghost images with unity visibility can be achieved with either quantum or classical correlation.
We investigate the nature of correlations in Gaussian light sources used for ghost imaging. We adopt methods from quantum information theory to distinguish genuinely quantum from classical correlations. Combining a microscopic analysis of speckle-speckle correlations with an effective coarse-grained description of the beams, we show that quantum correlations exist even in 'classical'-like thermal light sources, and appear relevant for the implementation of ghost imaging in the regime of low illumination. We further demonstrate that the total correlations in the thermal source beams effectively determine the quality of the imaging, as quantified by the signal-to-noise ratio.
The quantum ghost imaging phenomena, experimentally demonstrated a decade ago, exploited the apparent spooky action at a distance of entangled photon pairs and offered a novel approach toward imaging. Can ghost imaging effects be produced by ``classical'' light sources, such as separable systems of photon pairs or thermal light? If so, can these sources achieve the same accuracy achieved by entangled states? In order to answer these questions, we formulate the different physics behind entangled and separable systems in terms of a set of inequalities derived from the historical argument of Einstein, Podolsky, and Rosen. We show that the ghost images produced by separable sources are subject to the standard statistical limitations. However, entangled states offer the possibility of overcoming such limitations. Imaging can, therefore, achieve its fundamental limit through the high spatial resolution and nonlocal behavior of entangled systems.
We establish a quantum theory of computational ghost imaging and propose quantum projection imaging where object information can be reconstructed by quantum statistical correlation between a certain photon number of bucket signal and DMD random patterns. The reconstructed image can be negative or positive depending on the chosen photon number. In particular, the vacuum state (zero-number) projection produces a negative image with better visibility and contrast-to-noise ratio. The experimental results of quantum projection imaging agree well with theoretical simulations and show that, under the same measurement condition, vacuum projection imaging is superior to conventional and fast first-photon ghost imaging in low-light illumination.
Coincidence, or ghost, imaging is a technique that uses two correlated optical fields to form an image of an object. In this work we identify aspects of coincidence imaging which can be performed with classically correlated light sources and aspects which require quantum entanglement. We find that entangled photons allow high-contrast, high-resolution imaging to be performed at any distance from the light source. We demonstrate this fact by forming ghost images in the near and far fields of an entangled photon source, noting that the product of the resolutions of these images is a factor of 3 better than that which is allowed by classical diffraction theory.
Ghost imaging was first demonstrated with entangled photon pairs and well-known for its peculiar properties. The signal beam that illuminates the object possesses no spatial resolution, whereas the reference beam, which never interacts with the object, is spatially resolved. Either beam alone cannot retrieve the image, which can only be obtained when the signal and reference beams are correlated. Here we will report a ghost imaging experiment with even more peculiar properties, in which the image can be reconstructed when no photon interacts with the object or even no photon in neither signal nor reference beam. All the photons interacted with the object are discarded. Only the time bins with zero photon are employed to retrieve the image, a process referred to as "ghost imaging with zero photons" hereafter. The reason why ghost image can be retrieved with zero photons is jointly determined by photon-number projection measurement and photon statistics of thermal light. The results are helpful to resolve the debate on the physics of ghost imaging and understand the relation between quantum and classical correlations.
Ghost imaging is a novel non-conventional technique allowing to generate high resolution images by correlating the intensity of two light beams, neither of which independently contains sufficient information about the spatial distribution and shape of the object. The first demonstration of ghost imaging used light in double photon state, obtained from spontaneous parametric down-conversion. Owing to the entanglement of the source photons, the proposed theory required quantum descriptions for both the optical source and its photo-detection statistics1. However, subsequent experimental and theoretical considerations2,3 demonstrated that ghost imaging can be performed also with thermalized light, utilizing either CCD detector arrays or photon-counting detectors, thus admitting to a semi-classical description, employing classical fields and shot-noise limited detectors. This has generated increasing interest4-6 in establishing a unifying theory that characterizes the fundamental physics of ghost imaging and defines the boundary between classical and quantum domains. In this view, we exploited recent progress obtained through the application of Fourier Transform Techniques to demonstrate ghost imaging in the frequency domain, in order to measure a continuous spectrum by using a highly brilliant and coherent monochromatic source. In particular, we demonstrate the application of this ghost imaging technique to broadband spectroscopic measurements by means of interaction free photon detection. The experimental apparatus and the collected data are described in a dedicated work7. In this paper, we consider the theoretical aspects underlying the proposed Spectroscopic technique. In particular, two alternative theoretical models are presented. In one case, a statistical approach (semi-classical) is applied, where the states of the sampling beam are considered, whereas in the other case a pure quantum treatment is carried on, by describing the interaction of vacuum states generated by photon conversion processes. Both theoretical models, though carried on by means of a complementary formalism, lead to equivalent results and offer a physical interpretation of the collected experimental data. The application of these results offer novel perspectives for remote sensing in low light conditions, or in spectral regions where sensitive detectors are lacking.