Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Integrated multichannel photon timing instrument with very short dead time and high throughput

Michael Wahl, Tino Röhlicke, Hans-Jürgen Rahn, Rainer Erdmann, Gerald Kell, Andreas Ahlrichs, Martin Kernbach, Andreas Wolfgang Schell, Oliver J. Benson

Published Apr 1, 2013• 40 citations
Publisher

Abstract

Precisely timed detection of single photons plays an important role in the field of quantum information processing and fluorescence sensing. The method of time-correlated single photon counting is therefore constantly evolving and the associated instrumentation is being improved with new ideas and technologies. Simultaneous, time tagged readout of multiple detector channels is invaluable in many applications, spanning from fluorescence lifetime imaging in biology to the measurement of quantum optical correlations in basic research. Here we present a new integrated design, providing up to three independent input channels, a very short dead time, very high throughput, and a timing resolution of 25 ps at reasonable cost and small size. Apart from design features and test results of the instrument, we show an application in quantum optics, namely, the measurement of the photon statistics of a heralded single photon source based on cavity-enhanced spontaneous parametric down-conversion.

DOI
10.1063/1.4795828

Related papers

A Precise High Count-Rate FPGA Based Multi-Channel Coincidence Counting System for Quantum Photonics Applications

E. Arabul, Stefano Paesani, Scott Tancock +2 more

Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.

IEEE photonics journal•Jan 22, 2020•17 citations

Time-multiplexed heralded single-photon source

Fumihiro Kaneda, Bradley Christensen, Jia Jun Wong +3 more

Photons have proven to be excellent carriers of quantum information, and play essential roles in numerous quantum information processing (QIP) applications. In particular, heralded single- photon sources via spontaneous parametric-down conversion (SPDC) have been a key technology for demonstrating small-scale QIP, yet their low generation efficiency is a critical limitation for further scaling up optical QIP technology. In order to efficiently overcome the probabilistic nature of SPDC, here we demonstrate time multiplexing for up to 30 time slots of a periodically pumped heralded single-photon source, using a switchable low-loss optical storage cavity. We observe a maximum single-photon probability of 38.6% in periodic output time windows, corresponding to 6 times enhancement over a non-multiplexed source, but with no increase in the contribution of unwanted multi-photon events. Combining this time-multiplexing technique with a heralded source producing pure single-photon states should enable larger scale optical QIP systems than ever realized.

arXiv:1507.06052•Optica•Nov 25, 2015•155 citations

Design and Testing of Coincidence Module for Quantum Optical Research

Haoqian Xu, D. J. Li, Yuxuan Chen +7 more

In the field of quantum optics, especially in various experiments involving characterizing entangled photon pairs or quantum correlation effects, coincidence systems are primarily employed to detect and record temporal correlations between multiple photon events. Certain experiments propose higher requirements for the time precision of coincidence electronics, aiming to achieve high-precision time measurements with single-channel time resolution of ~10 ps RMS. To support diverse quantum optics experiments, a 32-channel high-precision coincidence module has been designed and fabricated. A series of tests have been conducted, and the results show that the time precision of each channel of the electronics is better than 10 ps RMS. Furthermore, preliminary experimental applications in quantum optics experiments have been successfully conducted.

International Conference on Electronics, Integrated Circuits and Communication Technology (EICCT)•Jul 11, 2025•0 citations

General and complete description of temporal photon correlations in cavity-enhanced spontaneous parametric down-conversion

Chris Müller, Andreas Ahlrichs, Oliver J. Benson

Heralded single-photon sources are the most commonly used sources for optical quantum technology applications. There is strong demand for accurate prediction of their spectral features and temporal correlations with ever-increasing precision. This is particularly important in connection with the intrinsically stochastic photon-pair generation process in heralded sources. Here we present a complete theoretical description of the temporal correlation of a signal-idler, signal-signal, and signal-signal-idler coincidences of photons generated by continuous-wave pumped cavity-enhanced spontaneous parametric down-conversion. The theory excellently predicts the measurements, which has been experimentally confirmed in our setup utilizing single-photon detectors with high temporal resolution. This enables us to resolve and analyze the multiphoton correlation functions in great detail.

arXiv:2007.11970•Physical Review A•Nov 3, 2020•5 citations

Time-Correlated Photons from Spontaneous Parametric Down-Conversion (SPDC)

Aaron Dubois, Islam, Tanvir, , ‘26, Thapa Magar, Prashan, , ‘26

Time-correlated photons can be used to demonstrate emerging technical applications such as ghost imaging, and they can demonstrate quantum-based phenomena in order to interest undergraduate students in engineering applications involving optics and quantum mechanics. In this work, we use spontaneous parametric down-conversion to generate time-correlated photons. To achieve this, we simulated laboratory parameters with MATLAB and designed optical and electrical setups. Specifically, we used a 405 nm diode laser, various common optical components, and a nonlinear crystal designed to generate time-correlated photons, and we used single-photon detectors, time-to-amplitude converters, custom flash-conversion analog-to-digital converters, a Teensy 4.1 microcontroller, and the Arduino IDE to detect the time-correlated photons. We present two significant results. First, we measured >100,000 counts per second 5 ± 1° on either side of our input laser which was within our theoretical expectations of 4–9° and much greater than our < 2000 dark counts per second. Our second major result was finding 15.8 ± 0.7 time-correlated counts per second with an SNR of 2.7. We also outline future extensions of our work including ghost imaging and generating polarization-entangled photons.

•Apr 1, 2026•0 citations

Scaling waveguide-integrated superconducting nanowire single-photon detector solutions to large numbers of independent optical channels

Matthias Häußler, Robin Terhaar, Martin A. Wolff +11 more

Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here, we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art multi-channel photon counting performance with average system detection efficiency of (40.5 ± 9.4)% and dark count rate of (123 ± 34) Hz for 32 individually addressable detectors at minimal noise-equivalent power of (5.1 ± 1.2) · 10−18 W/Hz. Our detectors achieve timing jitter as low as 26 ps, which increases to (114 ± 17) ps for high-speed multi-channel operation using dedicated time-correlated single photon counting electronics. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing, and imaging applications.

arXiv:2207.12060•Review of Scientific Instruments•Jan 1, 2023•23 citations
Precisely timed detection of single photons plays an important role in the field of quantum information processing and fluorescence sensing. The method of time-correlated single photon counting is therefore constantly evolving and the associated instrumentation is being improved with new ideas and technologies. Simultaneous, time tagged readout of multiple detector channels is invaluable in many applications, spanning from fluorescence lifetime imaging in biology to the measurement of quantum optical correlations in basic research. Here we present a new integrated design, providing up to three independent input channels, a very short dead time, very high throughput, and a timing resolution of 25 ps at reasonable cost and small size. Apart from design features and test results of the instrument, we show an application in quantum optics, namely, the measurement of the photon statistics of a heralded single photon source based on cavity-enhanced spontaneous parametric down-conversion.
Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.
Photons have proven to be excellent carriers of quantum information, and play essential roles in numerous quantum information processing (QIP) applications. In particular, heralded single- photon sources via spontaneous parametric-down conversion (SPDC) have been a key technology for demonstrating small-scale QIP, yet their low generation efficiency is a critical limitation for further scaling up optical QIP technology. In order to efficiently overcome the probabilistic nature of SPDC, here we demonstrate time multiplexing for up to 30 time slots of a periodically pumped heralded single-photon source, using a switchable low-loss optical storage cavity. We observe a maximum single-photon probability of 38.6% in periodic output time windows, corresponding to 6 times enhancement over a non-multiplexed source, but with no increase in the contribution of unwanted multi-photon events. Combining this time-multiplexing technique with a heralded source producing pure single-photon states should enable larger scale optical QIP systems than ever realized.
In the field of quantum optics, especially in various experiments involving characterizing entangled photon pairs or quantum correlation effects, coincidence systems are primarily employed to detect and record temporal correlations between multiple photon events. Certain experiments propose higher requirements for the time precision of coincidence electronics, aiming to achieve high-precision time measurements with single-channel time resolution of ~10 ps RMS. To support diverse quantum optics experiments, a 32-channel high-precision coincidence module has been designed and fabricated. A series of tests have been conducted, and the results show that the time precision of each channel of the electronics is better than 10 ps RMS. Furthermore, preliminary experimental applications in quantum optics experiments have been successfully conducted.
Heralded single-photon sources are the most commonly used sources for optical quantum technology applications. There is strong demand for accurate prediction of their spectral features and temporal correlations with ever-increasing precision. This is particularly important in connection with the intrinsically stochastic photon-pair generation process in heralded sources. Here we present a complete theoretical description of the temporal correlation of a signal-idler, signal-signal, and signal-signal-idler coincidences of photons generated by continuous-wave pumped cavity-enhanced spontaneous parametric down-conversion. The theory excellently predicts the measurements, which has been experimentally confirmed in our setup utilizing single-photon detectors with high temporal resolution. This enables us to resolve and analyze the multiphoton correlation functions in great detail.
Time-correlated photons can be used to demonstrate emerging technical applications such as ghost imaging, and they can demonstrate quantum-based phenomena in order to interest undergraduate students in engineering applications involving optics and quantum mechanics. In this work, we use spontaneous parametric down-conversion to generate time-correlated photons. To achieve this, we simulated laboratory parameters with MATLAB and designed optical and electrical setups. Specifically, we used a 405 nm diode laser, various common optical components, and a nonlinear crystal designed to generate time-correlated photons, and we used single-photon detectors, time-to-amplitude converters, custom flash-conversion analog-to-digital converters, a Teensy 4.1 microcontroller, and the Arduino IDE to detect the time-correlated photons. We present two significant results. First, we measured >100,000 counts per second 5 ± 1° on either side of our input laser which was within our theoretical expectations of 4–9° and much greater than our < 2000 dark counts per second. Our second major result was finding 15.8 ± 0.7 time-correlated counts per second with an SNR of 2.7. We also outline future extensions of our work including ghost imaging and generating polarization-entangled photons.
Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here, we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art multi-channel photon counting performance with average system detection efficiency of (40.5 ± 9.4)% and dark count rate of (123 ± 34) Hz for 32 individually addressable detectors at minimal noise-equivalent power of (5.1 ± 1.2) · 10−18 W/Hz. Our detectors achieve timing jitter as low as 26 ps, which increases to (114 ± 17) ps for high-speed multi-channel operation using dedicated time-correlated single photon counting electronics. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing, and imaging applications.