© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Physical Review A

Enhancement of quantum nondemolition measurements with an electro-optic feed-forward amplifier

B. C. Buchler, Ping Koy Lam, Timothy C. Ralph

Published Dec 1, 1999• 13 citations

Abstract

Methods for the enhancement of optical quantum nondemolition (QND) measurements are discussed. We review the use of meter squeezing as a QND enhancement tool and present a method of QND enhancement using an electro-optic feed-forward amplifier. By applying a linearized theory it is shown that these techniques work very well together. The combined effect of these enhancement methods is modeled for two QND systems, a squeezed light beam splitter and an optical parametric amplifier. We also discuss the conflict between the normal QND criteria and QND systems that involve noiseless amplification. We use an additional parameter to quantify the problem. A method for correcting the effects of noiseless amplification is discussed and modeled. We also discuss a special case of QND that eliminates the optical interaction between the meter and signal input beams. This system is shown to be a very effective QND device.

DOI: 10.1103/physreva.60.4943

Related papers

Quantum nondemolition measurement with a nonclassical meter input and an electro-optic enhancement

Ulrik L. Andersen, B. C. Buchler, Hans‐A. Bachor +1 more

Optical quantum nondemolition measurements are performed using a beamsplitter with a nonclassical meter input and a electro-optic feedforward loop. The nonclassical meter input is provided by a stable 4.5 dB amplitude squeezed source generated by an optical parametric amplifier. We show that the implementation of a feedforward loop gives a substantial improvement in the signal transfer efficiency. With a 92% reflective beamsplitter we measure a transfer coefficient of Ts+m = 1.81. The quantum state preparation ability of our system is evaluated using two-dimensional correlation plots. This technique allows the direct visualization of the quantum correlations between the outputs of the QND system.

Journal of Optics B Quantum and Semiclassical Optics•Apr 5, 2002•8 citations

Repeated Quantum Nondemolition Measurements of Continuous Optical Waves

Robert Bruckmeier, Hauke Hansen, Stephan Schiller

Repeated quantum nondemolition (QND) measurements for continuous optical waves were performed by combining a degenerate optical parametric amplifier and a squeezed-light beam splitter. Two-step quantum state preparation and three-beam entanglement of the individually squeezed output beams were demonstrated. The experiment is analyzed using a set of generalized criteria for nonideal individual and repeated QND measurements. The system was operated fully stabilized for up to 36 hours.

Physical Review Letters•Aug 25, 1997•27 citations

Quantum Nondemolition Measurements Improved by a Squeezed Meter Input

Robert Bruckmeier, Klaus Schneider, Stephan Schiller +1 more

Continuous quantum nondemolition (QND) measurements of the amplitude quadrature of a 1064 nm wave are performed with a monolithic dual-port degenerate optical parametric amplifier (OPA). The quality of the measurement is limited in part by the quantum fluctuations carried by the vacuum meter input wave. Improved QND measurements are realized by injecting 3.4 dB amplitude-squeezed light into the meter input port of the OPA. This achieves increased squeezing and correlation of the output signal and meter waves, and both improved operation as a quantum optical tap and as a quantum state preparator. The all-solid-state system was operated for 5 h with high stability.

Physical Review Letters•Feb 17, 1997•35 citations

Enhancing Quantum Nondemolition Measurements using Electro-Optic Feedforward

Ulrik L. Andersen, B. C. Buchler, Ping Koy Lam +2 more

Quantum Nondemolition (QND) measurements are carried out using a stable amplitude squeezed beam. The performance of the QND measurement is substantially enhanced by an electro-optic feedforward loop, which improves the signal transfer efficiency.

Optical Fiber Communication Conference•Jan 1, 2001•0 citations

Quantum nondemolition measurements and generation of individually squeezed twin beams by a degenerate optical parametric amplifier

Stephan Schiller, Robert Bruckmeier, Manfred Schalke +2 more

A novel scheme for continuous-wave quantum nondemolition (QND) detection of optical-amplitude quadratures is implemented using a degenerate optical parametric amplifier. A monolithic ring resonator with optimizable frustrated total internal reflection coupling is used. Signal and meter output beams are squeezed by 0.5 dB and 2.2 dB, and 38% correlated. This implies the first realization of individually squeezed twin beams, as well as quantum state preparation ability for both output beams. A quantum optical tap efficiency T s + T m = 1.08 is achieved. The all-solid-state system was completely stabilized and continuously operated as a QND device for up to 36 hours.

Europhysics Letters (EPL)•Nov 10, 1996•16 citations

Squeezing more from a quantum nondemolition measurement

B. C. Buchler, Ping Koy Lam, Hans‐A. Bachor +2 more

We use a stable, 5 dB, amplitude squeezed source for a quantum nondemolition (QND) experiment. The performance of our QND system is enhanced by an electro-optic feedforward loop which improves the signal transfer efficiency. At best, we measure a total signal transfer of 1.81 and conditional variance of 0.55.

Physical Review A•Dec 13, 2001•28 citations

Methods for the enhancement of optical quantum nondemolition (QND) measurements are discussed. We review the use of meter squeezing as a QND enhancement tool and present a method of QND enhancement using an electro-optic feed-forward amplifier. By applying a linearized theory it is shown that these techniques work very well together. The combined effect of these enhancement methods is modeled for two QND systems, a squeezed light beam splitter and an optical parametric amplifier. We also discuss the conflict between the normal QND criteria and QND systems that involve noiseless amplification. We use an additional parameter to quantify the problem. A method for correcting the effects of noiseless amplification is discussed and modeled. We also discuss a special case of QND that eliminates the optical interaction between the meter and signal input beams. This system is shown to be a very effective QND device.

Optical quantum nondemolition measurements are performed using a beamsplitter with a nonclassical meter input and a electro-optic feedforward loop. The nonclassical meter input is provided by a stable 4.5 dB amplitude squeezed source generated by an optical parametric amplifier. We show that the implementation of a feedforward loop gives a substantial improvement in the signal transfer efficiency. With a 92% reflective beamsplitter we measure a transfer coefficient of Ts+m = 1.81. The quantum state preparation ability of our system is evaluated using two-dimensional correlation plots. This technique allows the direct visualization of the quantum correlations between the outputs of the QND system.

Continuous quantum nondemolition (QND) measurements of the amplitude quadrature of a 1064 nm wave are performed with a monolithic dual-port degenerate optical parametric amplifier (OPA). The quality of the measurement is limited in part by the quantum fluctuations carried by the vacuum meter input wave. Improved QND measurements are realized by injecting 3.4 dB amplitude-squeezed light into the meter input port of the OPA. This achieves increased squeezing and correlation of the output signal and meter waves, and both improved operation as a quantum optical tap and as a quantum state preparator. The all-solid-state system was operated for 5 h with high stability.

A novel scheme for continuous-wave quantum nondemolition (QND) detection of optical-amplitude quadratures is implemented using a degenerate optical parametric amplifier. A monolithic ring resonator with optimizable frustrated total internal reflection coupling is used. Signal and meter output beams are squeezed by 0.5 dB and 2.2 dB, and 38% correlated. This implies the first realization of individually squeezed twin beams, as well as quantum state preparation ability for both output beams. A quantum optical tap efficiency T s + T m = 1.08 is achieved. The all-solid-state system was completely stabilized and continuously operated as a QND device for up to 36 hours.