aqora

SINGLE CA + IONS IN A PAUL-STRAUBEL TRAP

Martina Knoop, C. Champenois, Ph. W. Courteille +4 more

Symposium on Frequency Standards and MetrologyMay 1, 20020 citations

Miniature Paul—Straubel ion trap with well-defined deep potential well

Nan Yu, HANS G. DEHMELT, Warren Nagourney

In some recently proposed experiments using ion traps, a Paul trap of conventional size and design is insufficient. We have constructed a miniature Paul-Straubel trap. It has a small elliptic ring ( approximately 0.2 mm) and three pairs of planar electrodes ( approximately 2 cm part) arranged so that they form a cube. The two conventional end-cap electrodes are replaced by the six planar electrodes. The ring is heatable to a high temperature for improving the uniformity of the dc potential on the ring surface. With this trap, we hope to do such fundamental studies as the true zero-point confinement of a single ion.In some recently proposed experiments using ion traps, a Paul trap of conventional size and design is insufficient. We have constructed a miniature Paul-Straubel trap. It has a small elliptic ring ( approximately 0.2 mm) and three pairs of planar electrodes ( approximately 2 cm part) arranged so that they form a cube. The two conventional end-cap electrodes are replaced by the six planar electrodes. The ring is heatable to a high temperature for improving the uniformity of the dc potential on the ring surface. With this trap, we hope to do such fundamental studies as the true zero-point confinement of a single ion.

Proceedings of the National Academy of SciencesAug 1, 19898 citations

Squeezing close to the stability boundaries of the Paul trap

В. И. Савичев, R. Blümel

Physics Letters AMar 1, 20032 citations

Demonstration of new Paul–Straubel trap for trapping single ions

Nan Yu, Warren Nagourney, HANS G. DEHMELT

New Paul–Straubel traps [H. Straubel, Naturwissenschaften 18, 506 (1955)] have been recently constructed and used to trap single Ba+ ions. Unlike a conventional rf trap, these traps use only a ring electrode surrounded by an uncritical ground electrode structure. The overall simplicity makes it easy to miniaturize the trap and to control the trapping potential spatial orientation. The new design also allows intense heating of the ring electrode with an ion in the trap simply by passing a large current through it. This removes surface layers responsible for large contact potentials varying over the ring surface and greatly reduces the forced micromotion of the ion, which is supposedly ‘‘at rest.’’New Paul–Straubel traps [H. Straubel, Naturwissenschaften 18, 506 (1955)] have been recently constructed and used to trap single Ba+ ions. Unlike a conventional rf trap, these traps use only a ring electrode surrounded by an uncritical ground electrode structure. The overall simplicity makes it easy to miniaturize the trap and to control the trapping potential spatial orientation. The new design also allows intense heating of the ring electrode with an ion in the trap simply by passing a large current through it. This removes surface layers responsible for large contact potentials varying over the ring surface and greatly reduces the forced micromotion of the ion, which is supposedly ‘‘at rest.’’

Journal of Applied PhysicsMar 15, 199161 citations

Paul–Straubel–Kingdon trap for true zero-point confinement of an individual ion and reservoir

HANS G. DEHMELT, Nan Yu

A modification of the Paul-Straubel trap previously described by us may profitably be operated in a Paul-Straubel-Kingdon (PSK) mode during the initial loading of an individual ion into the trap. Thereby the coating of the trap ring electrode by the atomic beam directed upon it in earlier experiments is eliminated, as is the ionization of an already trapped ion. Coating created serious problems as it spot-wise changed the work function of the ring electrode, which caused large, uncontrolled dc fields in the trap center that prevented zero-point confinement. Operating the Paul-Straubel trap with a small negative bias on the ring electrode wire is all that is required to realize the PSK mode. In this mode the tiny ring trap in the center of the long, straight wire section is surrounded by a second trapping well shaped like a long, thin-walled cylindrical shell and extending to the end-caps. There, ions may be conveniently created in this well without danger of coating the ring with barium. In addition, the long second well is useful as a multi-ion reservoir.A modification of the Paul-Straubel trap previously described by us may profitably be operated in a Paul-Straubel-Kingdon (PSK) mode during the initial loading of an individual ion into the trap. Thereby the coating of the trap ring electrode by the atomic beam directed upon it in earlier experiments is eliminated, as is the ionization of an already trapped ion. Coating created serious problems as it spot-wise changed the work function of the ring electrode, which caused large, uncontrolled dc fields in the trap center that prevented zero-point confinement. Operating the Paul-Straubel trap with a small negative bias on the ring electrode wire is all that is required to realize the PSK mode. In this mode the tiny ring trap in the center of the long, straight wire section is surrounded by a second trapping well shaped like a long, thin-walled cylindrical shell and extending to the end-caps. There, ions may be conveniently created in this well without danger of coating the ring with barium. In addition, the long second well is useful as a multi-ion reservoir.

Proceedings of the National Academy of SciencesSep 16, 19974 citations

Single Ions in Paul Traps

Hanns‐Christoph Nägerl, Christian F. Roos, H. J. Rohde +4 more

Springer eBooksNov 14, 20070 citations

Characterization of a miniature Paul-Straubel trap

Related papers

Characterization of a miniature Paul-Straubel trap

Related papers