Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics B

Continuous beams of cold atoms for space applications

P. Thomann, Mark D. Plimmer, Giovanni Di Domenico, N. Castagna, Jocelyne Guéna, G. Dudle, Ferenc Fuzesi

Published Aug 25, 2006• 6 citations
Publisher
DOI
10.1007/s00340-006-2398-4

Related papers

Compact, Continuous-Beam, Cold-Atom Clock for Satellite Applications

H. Wang, Walter F. Buell

Highly stable atomic frequency standards are of increasing importance for a variety of space applications, ranging from communication to navigation and time transfer to tests of fundamental science. The requirements for an atomic clock vary significantly depending on the application, and for many space systems, compactness and robust design are at a premium, and stability dominates over absolute accuracy. We report on progress with our design for a compact laser-cooled Cs- beam atomic clock suitable for satellite applications such as GPS. The basic design features a continuous, cold atomic beam extracted from a magneto-optic trap (MOT). This cold atomic beam is then to be used in a laser-pumped Ramsey clock, with the clock signal derived from either a microwave C-field or, alternatively, by Raman resonance between the Ramsey fields. In order to reduce light shifts from the MOT light and improve signal-to-noise, the atomic beam will be optically deflected and transversely cooled upon extraction from the MOT. We estimate that the shot-noise-limited stability achievable with this physics package can be 2 to 3 orders of magnitude better than current Cs-beam clocks used in satellite applications. We present our experimental progress towards a working frequency standard, including characterization of our six-beam magneto-optic cold atom trap and production and characterization of a cold atomic beam.

•Jun 30, 2002•1 citation

Compact cold atom systems - prospects for space applications

Erling Riis, Paul F. Griffin, Aidan S. Arnold

cosp•Jul 1, 2018•0 citations

Cold atoms and precision sensors in space

Wolfgang A. Ertmer, Ernst Maria Rasel, Ch Salomon +3 more

Europhysics news•May 1, 2008•2 citations

Compact CW cold beam cesium atomic clock

Walter F. Buell, Bernardo Jaduszliwer

We present a novel cesium beam physics package, which uses optical techniques to combine the high signal-to-noise ratios achievable by optical pumping and beam brightening with the narrow linewidth allowed by a slow atomic beam. Our design can be realized in a compact, robust package suitable for space applications. Our approach differs from other laser-cooled clocks in that we use a cold-atom source that provides a continuous beam. We estimate the shot noise-limited stability that can be achieved with this physics package to be two to three orders of magnitude better than that of current compact cesium beam atomic clocks.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jan 22, 2003•4 citations

Laser cooling of a magnetically guided ultra cold atom beam

Anoush Aghajani-Talesh

This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.

•Jan 1, 2014•9 citations

Ultra cold electron and ion beams

MP Merijn Reijnders

•Jan 1, 2006•0 citations
Highly stable atomic frequency standards are of increasing importance for a variety of space applications, ranging from communication to navigation and time transfer to tests of fundamental science. The requirements for an atomic clock vary significantly depending on the application, and for many space systems, compactness and robust design are at a premium, and stability dominates over absolute accuracy. We report on progress with our design for a compact laser-cooled Cs- beam atomic clock suitable for satellite applications such as GPS. The basic design features a continuous, cold atomic beam extracted from a magneto-optic trap (MOT). This cold atomic beam is then to be used in a laser-pumped Ramsey clock, with the clock signal derived from either a microwave C-field or, alternatively, by Raman resonance between the Ramsey fields. In order to reduce light shifts from the MOT light and improve signal-to-noise, the atomic beam will be optically deflected and transversely cooled upon extraction from the MOT. We estimate that the shot-noise-limited stability achievable with this physics package can be 2 to 3 orders of magnitude better than current Cs-beam clocks used in satellite applications. We present our experimental progress towards a working frequency standard, including characterization of our six-beam magneto-optic cold atom trap and production and characterization of a cold atomic beam.
We present a novel cesium beam physics package, which uses optical techniques to combine the high signal-to-noise ratios achievable by optical pumping and beam brightening with the narrow linewidth allowed by a slow atomic beam. Our design can be realized in a compact, robust package suitable for space applications. Our approach differs from other laser-cooled clocks in that we use a cold-atom source that provides a continuous beam. We estimate the shot noise-limited stability that can be achieved with this physics package to be two to three orders of magnitude better than that of current compact cesium beam atomic clocks.
This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.