IEEE Transactions on Wireless Communications

On the Physical Layer Security of Backscatter Wireless Systems

Walid Saad, Xiangyun Zhou, Zhu Han, H. Vincent Poor

Published Jun 1, 2014• 126 citations

Abstract

Backscatter wireless communication lies at the heart of many practical low-cost, low-power, distributed passive sensing systems. The inherent cost restrictions coupled with the modest computational and storage capabilities of passive sensors, such as RFID tags, render the adoption of classical security techniques challenging; which motivates the introduction of physical layer security approaches. Despite their promising potential, little has been done to study the prospective benefits of such physical layer techniques in backscatter systems. In this paper, the physical layer security of wireless backscatter systems is studied and analyzed. First, the secrecy rate of a basic single-reader, single-tag model is studied. Then, the unique features of the backscatter channel are exploited to maximize this secrecy rate. In particular, the proposed approach allows a backscatter system's reader to inject a noise-like signal, added to the conventional continuous wave signal, in order to interfere with an eavesdropper's reception of the tag's information signal. The benefits of this approach are studied for a variety of scenarios while assessing the impact of key factors, such as antenna gains and location of the eavesdropper, on the overall secrecy of the backscatter transmission. Numerical results corroborate our analytical insights and show that, if properly deployed, the injection of artificial noise yields significant performance gains in terms of improving the secrecy of backscatter wireless transmission.

DOI: 10.1109/twc.2014.051414.130478

Related papers

Physical layer secrecy solution for passive wireless sensor networks

Thombre Avinash Sarjerao, Aditya Trivedi

The backscatter communication system has tremendous potential in commercial applications, still very less work has been done to study the benefits of it. Backscatter communication system is the backbone of many low cost and low power distributed wireless systems. The data transmission between various nodes in wireless communication system always comes with the risk of third party interception. This leads to privacy and security breaches of the information. In this paper, physical layer security of backscatter wireless system for multiple eavesdropper, single tag, and single reader case is studied. Unique characteristics of the channel are used to provide security to signal transmission. In order to degrade the reception of the signal by eavesdropper, a noise injection scheme is proposed. The advantages of this approach are discussed for various cases while evaluating the impact of the key factors like antenna gain and location of the eavesdropper on the secrecy of the transmission. Analytical results indicate that if properly employed, the noise injection scheme improves the performance of backscatter wireless system.

International Conference on Computing, Communication and Security (ICCCS)Dec 1, 20150 citations

On the physical layer security of backscatter RFID systems

Walid Saad, Zhu Han, H. Vincent Poor

Securing radio frequency identification (RFID) systems against malicious attacks such as eavesdropping is a highly challenging task due to the resource constrained nature of such systems. In fact, the modest computational and storage capabilities of RFID tags makes it impossible to adopt classical cryptographic techniques. While existing work has mostly focused on lightweight cryptographic techniques, in this paper, the first analysis on the adoption of physical layer security techniques in an RFID system is presented. First, the secrecy rate of ultra high frequency (UHF) RFID backscatter systems is characterized. Then, a novel approach is proposed for maximizing this secrecy rate by exploiting the nature and features of the RFID backscatter channel. To explore these features, the proposed approach allows the RFID readers to append artificial noise signals to their continuous wave (CW) signals which then propagate via the backscatter channel hence inducing interference at the eavesdroppers. For enabling the readers to optimally allocate power between their CW signals and artificial noise, a noncooperative game is formulated using which the readers can decide on their optimal power allocations so as to maximize their overall secrecy rates, given the ensuing inter-reader interference. For solving this game, a best response algorithm is proposed using which the readers can reach a Nash equilibrium. Simulation results show that the proposed approach yields significant performance gains, in terms of the average secrecy rate per RFID reader, of at least 17% relative to the classical RFID operation.

International Symposium on Wireless Communication SystemsAug 1, 201210 citations

A distinctive method to improve the security capacity of backscatter wireless system

Huiying Song, Yuanyuan Gao, Nan Sha +2 more

Backscatter communication system is the backbone of many low cost and low power distributed wireless systems. This paper studies the physical layer security (PLS) performance of a backscatter system which contains several relays and an eavesdropper. We discuss the conditions for a positive secrecy rate of the system in two different situations. First, in the case of known information of eavesdropper, we use a sub-optimal relay selection method to secure backscatter communication and maximize the secrecy rate. The simulation results prove the suboptimal scheme with low complexity achieves the same effects as the optimal one. But the transmission rate is very low due to the difference between the main channel and eavesdropper channel is too little, so we put forward the second distinctive method. Second, without knowing any information of eavesdropper, we adopt the artificial noise (AN) technique to reduce the received signal to interference noise (SINR) of eavesdropper, and came to a conclusion that under the condition of the same system model, adding a weak AN greatly improves the secrecy rate compared to situation one, and it doesn't required to obtain any information of eavesdropper. In small power of this type of communication system, this method is also effective.

IEEE Advanced Information Technology, Electronic and Automation Control Conference (IAEAC)Mar 1, 201711 citations

Wireless Physical-Layer Security Performance of Uwb systems

Ko, Miyong

Traditionally, spread-spectrum systems have been employed to provide low probability-of-intercept (LPI) and low probability-of-detection (LPD) performances at the physical layer, but the messages transmitted over such a system are still encrypted with a powerful cipher to protect their secrecy. Our challenge is to find a solution to provide an additional level of security at the physical layer so that simple systems such as RFID tags with limited resources can be secure without using standard encryption. It has recently been suggested that the cryptographic security of the system can be enhanced by exploiting physical properties of UWB signals. With an eavesdropper observing the communications over multipath channels between two legitimate partners sharing a secret key of a limited length, we consider both coherent and reference-based UWB schemes to enhance security. The security of the legitimate nodes is achieved by signal attributes based on the secret key, conferring an advantage over the adversary. We propose UWB signaling schemes to improve physical layer security when the transmission is intended for coherent reception and TR reception. Among possible improvements, we consider removing the frame structure of the UWB coherent signaling scheme, resulting in pulses that can be located anywhere in the symbol period. Our proposed signaling schemes could potentially suggest a solution for applications relying on conventional cryptography, especially for low-data rate RFID systems.

Jan 1, 20110 citations

Physical Layer Secuirty Techniques for RFID Systems

Gehad Essam Desouky

The deployment of RFID technology in various applications is delayed due to the increased concerns over possible security breaches, especially in healthcare applications. For medical devices and applications, RFID and IoT technologies can improve the wellbeing of patients and reduce errors at hospitals, but the deployment of RFID is obstructed by multiple barriers including the security concerns. Previous research and studies have proved that traditional cryptography methods cannot be applied on RFID, due to the limited computational, storage and power resources in RFID tags and readers. These constraints emerged the novel idea of exploiting the characteristics of the physical layer to achieve information secrecy in RFID systems. In this thesis, two novel key-less physical layer based secrecy approaches have been developed and analyzed. In first approach a combined beamsteering and injected noise scheme is proposed, where beamsteering is exploited at the tag and the noise injection is exploited at the reader. The results show that this novel approach outperforms previous developed security scheme for RFID. Another novel approach is developed by implementing directional modulation (DM) techniques at the RFID reader while maintaining the simplicity of the tag’s circuity and processing capabilities.

Jun 1, 20200 citations

Safeguarding RFID Wireless Communication Against Proactive Eavesdropping

Zhao Bing-qing, Hui‐Ming Wang, Peng Liu

Passive radio-frequency identification (RFID) communication raises new transmission secrecy protection challenges, since passive tags stored information lack effective information protection mechanisms. Due to constraints of passive tags, such as limited computation and storage capabilities, security solutions based on the physical-layer security (PLS) are promising candidates compared to those based on conventional lightweight cryptography. Unlike existing endeavors on PLS of RFID wireless communication, we consider an RFID system in the presence of a special proactive eavesdropper, which is able to both enhance the information wiretap and interfere with the information detection at the RFID reader simultaneously by broadcasting its own continuous-wave (CW) signal. To defend against proactive eavesdropping attacks, we propose a wiretap-channel-conscious artificial-noise (AN)-aided secure transmission scheme for the RFID reader, which first estimates both legitimate and wiretap channels and then superimposes an AN signal on the CW signal to confuse the proactive eavesdropper. The transmit power and power allocation between the AN signal and the CW signal are optimized to maximize the secrecy rate. Furthermore, we model the attack and defense process between the proactive eavesdropper and the RFID reader as a hierarchical security game and prove it can achieve the equilibrium. The simulation results show the superiority of our proposed scheme in terms of the secrecy rate and the interactions between the RFID reader and the proactive eavesdropper.

IEEE Internet of Things JournalJun 1, 202026 citations