Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Coherent detection of ultrasound using spectral hole burning media

Jian Wei Tay, Patrick M. Ledingham, Jevon J. Longdell

Published Feb 10, 2011• 1 citation
Publisher

Abstract

We demonstrate the optical detection of ultrasound using spectral hole burning in a cryogenic rare earth ion doped crystal. The dispersion due to the hole is used to perform phase to amplitude modulation conversion. This method allows sensitive detection of ultrasonic displacements with the advantage of large étendue. This method is also attractive as it requires only moderate absorption contrast to achieve high sensitivity. We also describe a method for diode laser stabilisation using optical feedback through spectral holes which dramatically reduces the laser phase noise.

DOI
10.1117/12.875605

Related papers

Coherent optical ultrasound detection with rare-earth ion dopants

Jian Wei Tay, Patrick M. Ledingham, Jevon J. Longdell

We describe theoretical and experimental demonstration for optical detection of ultrasound using a spectral hole engraved in cryogenically cooled rare-earth ion-doped solids. Our method utilizes the dispersion effects due to the spectral hole to perform phase-to-amplitude modulation conversion. Like previous approaches using spectral holes, it has the advantage of detection with large étendue. The method also has the benefit that high sensitivity can be obtained with moderate absorption contrast for the spectral holes.

arXiv:1007.0811•Applied Optics•Aug 2, 2010•15 citations

Development and characterization of high suppression and high étendue narrowband spectral filters

Adam Kinos, Qian Li, Lars Rippe +1 more

The present work addresses critical issues in constructing high suppression, narrowband spectral filters in rare-earth-ion-doped crystals, mainly targeting the application of ultrasound optical tomography but is also applicable for areas such as quantum memories, self-filtering of laser frequencies, and other applications relying on high absorption in rare-earth-ion-doped crystals. The polarization of light transmitted through a highly absorbing crystal is experimentally analyzed. Additionally, an existing wave propagation method is used to simulate beam propagation through a spectral hole to study the high étendue requirements of ultrasound optical tomography.

Applied Optics•Dec 16, 2016•18 citations

Investigation of phase conjugation for medical imaging

Ivan Sytcevich

With the development of extremely precise spectral filters based on spectral hole burning and slow light effects, the idea of their implementation in an Ultrasound Optical Tomography (UOT) medical imaging technique arose. Simulations have shown that the resulting Contrast-to-Noise (CNR) ratio is fairly good at depths up to 5 cm but decreases dramatically when probing deeper in tissue. One of the possible enhancements of this technique is to include a phase conjugator after the filter to reverse and amplify ultrasound-tagged photons and send them back to the area of interest. This project tries to investigate the possibilities of using rare-earth-ion-doped crystals as potential phase-conjugating elements in the UOT and is specifically aimed at studying the properties of an optical phase conjugation process in these media. Experimental work was done on two crystals doped with Praseodymium and the phase-conjugated signal was studied as a function of different parameters with results discussed and presented in the respective section. In particular, efficient phase conjugation was observed in a 6-mm thick Pr:YSO crystal with reflectivity values reaching up to 124 \%. Further outlook and possible applications are given at the end of the thesis.

•Jan 1, 2017•0 citations

Optical detection of ultrasound using AFC-based quantum memory technique in cryogenic rare earth ion doped crystals

Luke R. Taylor, D. L. McAuslan, Jevon J. Longdell

We present results of a novel and highly sensitive technique for the optical detection of ultrasound using the selective storage of frequency shifted photons in an inherently highly efficient and low noise atomic frequency comb (AFC) based quantum memory. The ultrasound ‘tagged’ optical sidebands are absorbed within a pair of symmetric AFCs, generated via optical pumping in a Pr3+:Y2SiO5 sample (tooth separation Δ = 150 kHz, comb finesse fc ~ 2 and optical depth αL ~ 2), separated by twice the ultrasound modulation frequency (1.5 MHz) and centered on either side of a broad spectral pit (1.7 MHz width) allowing transmission of the carrier. The stored sidebands are recovered with 10-20% efficiency as a photon echo (as defined by the comb parameters), and we demonstrate a record 49 dB discrimination between the sidebands and the carrier pulse, high discrimination being important for imaging tissues at depth. We further demonstrate detector limited discrimination (~29 dB) using a highly scattered beam, confirming that the technique is immune to speckle decorrelation. We show that it also remains valid in the case of optically thin samples, and thus represents a significant improvement over other ultrasound detection methods based on rare-earth-ion-doped crystals. These results strongly suggest the suitability of our technique for high-resolution non-contact real-time imaging of biological tissues.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 4, 2013•3 citations

RF spectrum analysis in spectral hole burning media

Max Colice, Friso Schlottau, Kelvin H. Wagner +4 more

We propose a novel, wideband spectrum analyzer based on spectral hole burning (SHB) technology. SHB crystals contain rare earth ions doped into a host lattice, and are cooled to cryogenic temperatures to allow sub-MHz hole burning linewidths. The signal spectrum is recorded in an SHB crystal by illuminating the crystal with an optical beam modulated by the RF signal of interest. The signal's spectral components excite those rare earth ions whose resonance frequencies coincide with the spectral component frequencies, engraving the RF spectrum into the crystal's absorption profile. Probing this altered absorption profile with a low power, chirped laser while measuring the transmitted intensity results in a time-domain readout of the accumulated RF signal spectrum. The resolution of the spectrum analyzer is limited only by the homogeneous linewidth of the rare earth ions (< 1 MHz when the SHB crystal is cooled to cryogenic temperatures). The spectrum analyzer bandwidth is limited by the inhomogeneous linewidth and by the electro-optic modulator bandwidth, both of which can be > 20 GHz.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 22, 2004•17 citations

Spectral Hole Burning for Ultra-stable Lasers

Shuo Zhang, Nemanja Lučić, Nicolas Galland +6 more

Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•1 citation
We demonstrate the optical detection of ultrasound using spectral hole burning in a cryogenic rare earth ion doped crystal. The dispersion due to the hole is used to perform phase to amplitude modulation conversion. This method allows sensitive detection of ultrasonic displacements with the advantage of large étendue. This method is also attractive as it requires only moderate absorption contrast to achieve high sensitivity. We also describe a method for diode laser stabilisation using optical feedback through spectral holes which dramatically reduces the laser phase noise.
We describe theoretical and experimental demonstration for optical detection of ultrasound using a spectral hole engraved in cryogenically cooled rare-earth ion-doped solids. Our method utilizes the dispersion effects due to the spectral hole to perform phase-to-amplitude modulation conversion. Like previous approaches using spectral holes, it has the advantage of detection with large étendue. The method also has the benefit that high sensitivity can be obtained with moderate absorption contrast for the spectral holes.
The present work addresses critical issues in constructing high suppression, narrowband spectral filters in rare-earth-ion-doped crystals, mainly targeting the application of ultrasound optical tomography but is also applicable for areas such as quantum memories, self-filtering of laser frequencies, and other applications relying on high absorption in rare-earth-ion-doped crystals. The polarization of light transmitted through a highly absorbing crystal is experimentally analyzed. Additionally, an existing wave propagation method is used to simulate beam propagation through a spectral hole to study the high étendue requirements of ultrasound optical tomography.
With the development of extremely precise spectral filters based on spectral hole burning and slow light effects, the idea of their implementation in an Ultrasound Optical Tomography (UOT) medical imaging technique arose. Simulations have shown that the resulting Contrast-to-Noise (CNR) ratio is fairly good at depths up to 5 cm but decreases dramatically when probing deeper in tissue. One of the possible enhancements of this technique is to include a phase conjugator after the filter to reverse and amplify ultrasound-tagged photons and send them back to the area of interest. This project tries to investigate the possibilities of using rare-earth-ion-doped crystals as potential phase-conjugating elements in the UOT and is specifically aimed at studying the properties of an optical phase conjugation process in these media. Experimental work was done on two crystals doped with Praseodymium and the phase-conjugated signal was studied as a function of different parameters with results discussed and presented in the respective section. In particular, efficient phase conjugation was observed in a 6-mm thick Pr:YSO crystal with reflectivity values reaching up to 124 \%. Further outlook and possible applications are given at the end of the thesis.
We present results of a novel and highly sensitive technique for the optical detection of ultrasound using the selective storage of frequency shifted photons in an inherently highly efficient and low noise atomic frequency comb (AFC) based quantum memory. The ultrasound ‘tagged’ optical sidebands are absorbed within a pair of symmetric AFCs, generated via optical pumping in a Pr3+:Y2SiO5 sample (tooth separation Δ = 150 kHz, comb finesse fc ~ 2 and optical depth αL ~ 2), separated by twice the ultrasound modulation frequency (1.5 MHz) and centered on either side of a broad spectral pit (1.7 MHz width) allowing transmission of the carrier. The stored sidebands are recovered with 10-20% efficiency as a photon echo (as defined by the comb parameters), and we demonstrate a record 49 dB discrimination between the sidebands and the carrier pulse, high discrimination being important for imaging tissues at depth. We further demonstrate detector limited discrimination (~29 dB) using a highly scattered beam, confirming that the technique is immune to speckle decorrelation. We show that it also remains valid in the case of optically thin samples, and thus represents a significant improvement over other ultrasound detection methods based on rare-earth-ion-doped crystals. These results strongly suggest the suitability of our technique for high-resolution non-contact real-time imaging of biological tissues.
We propose a novel, wideband spectrum analyzer based on spectral hole burning (SHB) technology. SHB crystals contain rare earth ions doped into a host lattice, and are cooled to cryogenic temperatures to allow sub-MHz hole burning linewidths. The signal spectrum is recorded in an SHB crystal by illuminating the crystal with an optical beam modulated by the RF signal of interest. The signal's spectral components excite those rare earth ions whose resonance frequencies coincide with the spectral component frequencies, engraving the RF spectrum into the crystal's absorption profile. Probing this altered absorption profile with a low power, chirped laser while measuring the transmitted intensity results in a time-domain readout of the accumulated RF signal spectrum. The resolution of the spectrum analyzer is limited only by the homogeneous linewidth of the rare earth ions (< 1 MHz when the SHB crystal is cooled to cryogenic temperatures). The spectrum analyzer bandwidth is limited by the inhomogeneous linewidth and by the electro-optic modulator bandwidth, both of which can be > 20 GHz.
Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.