Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics A Mathematical and General

Total delay time and tunnelling time for non-rectangular potential barriers

L. V. Chebotarev

Published Apr 7, 1996• 6 citations
Publisher

Abstract

The total delay time for a particle tunnelling through a non-rectangular potential barrier is calculated as an explicit function of the potential energy U(x), on a rigorous mathematical basis. The resulting expression is valid for sufficiently smooth potentials. It represents a physically well defined quantity that is measured in the experiment directly. In particular, an explicit expression for the tunnelling time related to the potential is obtained. It is valid if the particle's wavelength, taken far away from the barrier, is small compared with the barrier's effective length l, irrespective of the value of the barrier penetration integral. Exact sufficient conditions for the validity of Connor's parabolic connection formulae are established.

DOI
10.1088/0305-4470/29/7/017

Related papers

Dwell Time of Particles in Tunneling Barriers of Arbitrary Shape

Er-juan Bai, Shu Qi-Qing

For a one-dimensional barrier of arbitrary shape, an expression of the dwell time of tunneling particles has been obtained by subdividing it into infinitesimal rectangular barrier elements and then summing the dwell times spent by particles inside the barrier elements, and the dwell times in a parabolic potential barrier were calculated. The results show that the dwell times are almost independent of the barrier width as it is greater than a characteristic width W c . This can be ascribed that in the width range beyond W c , the tunneling probabilities through the barrier elements are very small, thus the times taken to tunnel through them make little contribution to the summation of the dwell times in all the barrier elements.

Chinese Physics Letters•Dec 1, 1998•4 citations

Quantum-mechanical tunneling time and its relation to the Tsu-Esaki formula

Marc M. Cahay, T. Dichiaro, P. Thanikasalam +1 more

Various approaches have been used to calculate the quantum-mechanical tunneling time through potential barriers including the phase-delay method first introduced by Bohm and Wigner, Buttiker's analysis of the Larmor clock and its generalization, the dwell time of Smith, and numerical studies of wavepacket propagation through potential barriers among others. Most of those previous estimates have only dealt with the tunneling time through simple obstacles, including delta-potential scatterers and simple rectangular barriers under zero bias condition. Even for these simple cases, the agreement among the various estimates is far from being satisfactory. In this manuscript, the transmission line technique is employed to solve the time-dependent Schrodinger equation and an expression of the quantum-mechanical tunneling time is derived for an arbitrary potential profile under non zero bias condition. An exact analytical expression of the tunneling time through a rectangular barrier is derived and shown to be identical to the one obtained recently by Spiller et. al. using the Bohm's quantum potential approach. The tunneling time through resonant tunneling structures under zero bias is also calculated and is shown to be minimum at the quasi-boundstate energy. Finally, the quantum-mechanical tunneling time through the emitter-base junction of a typical heterojunction bipolar transistor is shown to be larger than its semiclassical counterpart.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 3, 1992•3 citations

Tunneling of a Wave Packet

Thomas E. Hartman

Analytic expressions are given for the time spent by a particle tunneling through a potential barrier. The expressions are derived for an incident wave packet which is initially Gaussian, centered about a point an arbitrary distance away from a rectangular potential barrier and moving toward the barrier with constant average velocity. Upon collision with the barrier, the packet splits into a transmitted and a reflected packet. The resultant transmission time is positive, nonzero and in principle measurable. Although the transmission time becomes quite large as the incident kinetic energy becomes very small, in general, for nonzero incident momentum and finite potential barriers which are neither very thick nor very thin, the transmission times are less than the time that would be required for the incident particle to travel a distance equal to the barrier thickness. The transmission times for metal-insulator-metal thin film sandwiches, given approximately by δt3=ℏ/(Efφ)12, where Ef is the Fermi energy of the metal, and φ the vacuum work function, are of the order of 10−16 sec, compared to RC time constants of about 10−13 sec.

Journal of Applied Physics•Dec 1, 1962•821 citations

Some important aspects of the tunneling phenomenon through quantum structures

E. Polatdemir

Tunneling phenomenon is one of the wondrous events that take place particularly in quantum mechanics and it has no counterpart in classical physics. We focus on its two important implications : tunneling time and tunneling probability. There has been no consensus on tunneling times among the tunneling time community for last seven decades. So far, most of the attempts to calculate tunneling times have apparently been centered on a simple rectangular barrier example. We implement the tunneling times with the most widely accepted approach, which is using physical Larmor clock, into a nonsymmetrical barrier and a double barrier. It results in different and unique insights into the usual understanding of tunneling time. Three characteristics tunneling time expressions are thoroughly studied in these quantum structures. The difference between dwell time and phase-delay time is once again approved. The unique characteristics of the phase-delay time, which was thought to be exactly similar to dwell time when we assign higher energies to the particles, is also revealed in the nonsymmetrical barrier that it should actually be regarded as a distinct feature from the dwell time. The singularity of reflection time in rectangular barrier is no longer valid in nonsymmetrical barrier. The finiteness of reflection time fairly shows that different quantum structures might bear some taboo breaking results. Since a double barrier involves much more complicated features and calculations, the calculation of tunneling times under this barrier is praiseworthy. The dwell time is the most crucial, troublesome and distinctive tunneling time element to look into for a double barrier. Besides the dwell and phase-delay time, we also calculate the three characteristic times as well as the reflection time for a double barrier. Another area that we study within the context of tunneling phenomenon is the tunneling probability. Recently, there has been ground shaking attempts in modifying the conventional WKB formulae. We follow one of the modified versions of WKB formulae in order to be able to calculate the tunneling probability through different quantum structures where conventional WKB formulae fail. These generalized WKB connection formulae are applied to some complex quantum potentials by seeking aid from the Green's function and the path integral approach. One of the biggest problems in quantum mechanics (visualization) is partially overcome through implementing the method of diagrammatic representations that make the life easier in understanding the events happening in the quantum world when we attempt to calculate the transmission and reflection probabilities. This part therefore has a pedagogical sense too in terms of interpreting the results in a diagrammatic way with the help of the path integral approach.

•Jan 1, 2002•0 citations

Tunneling times for one-dimensional systems

V. Gasparian, M. Ortuño, J. Ruiz +2 more

We derive a general expression for the tunneling time in layered systems based on the Larmor-clock approach. We show that our results are equivalent to those obtained by the Feynman path-integral technique. We establish a relation between functional derivatives of the barrier potential and partial derivatives with respect to the incident energy. In application, we computed the tunneling time and the reflection time for a rectangular barrier, for a double rectangular barrier, and for a Gaussian potential.

Physical review. B, Condensed matter•Mar 1, 1995•26 citations

Wavelength Dependent Tunneling Delay Time

Xiaolei Hao, Zheng Shu, Weidong Li +1 more

A clear consensus on how long it takes a particle to tunnel through a potential barrier has never been so urgently required, since the electron dynamics in strong-field ionization can be resolved on attosecond time-scale in experiment and the exact nature of the tunneling process is the key to trigger subsequent attosecond techniques. Here a general picture of tunneling time is suggested by introducing a quantum travel time, which is defined as the ratio of the travel distance to the expected value of the velocity operator under the barrier. Specially, if applied to rectangular barrier tunneling, it can retrieve the Büttiker-Landauer time $τ_{BL}$ in the case of an opaque barrier, and has a clear physical meaning in the case of a very thin barrier wherein $τ_{BL}$ can not be well defined. In the case of strong-field tunneling process, with the help of the newly defined time, the tunneling delay time measured by attoclock experiment can be interpreted as a travel time spent by the electron to tunnel from a point under the barrier to the tunnel exit. In addition, a peculiar oscillation structure in the wavelength dependence of tunneling delay time in deep tunneling regime is observed, which is beyond the scope of adiabatic tunneling picture. This oscillation structure can be attributed to the interference between the ground state tunneling channel and the excited states tunneling channels.

arXiv:1903.06897•Mar 16, 2019•0 citations
The total delay time for a particle tunnelling through a non-rectangular potential barrier is calculated as an explicit function of the potential energy U(x), on a rigorous mathematical basis. The resulting expression is valid for sufficiently smooth potentials. It represents a physically well defined quantity that is measured in the experiment directly. In particular, an explicit expression for the tunnelling time related to the potential is obtained. It is valid if the particle's wavelength, taken far away from the barrier, is small compared with the barrier's effective length l, irrespective of the value of the barrier penetration integral. Exact sufficient conditions for the validity of Connor's parabolic connection formulae are established.
For a one-dimensional barrier of arbitrary shape, an expression of the dwell time of tunneling particles has been obtained by subdividing it into infinitesimal rectangular barrier elements and then summing the dwell times spent by particles inside the barrier elements, and the dwell times in a parabolic potential barrier were calculated. The results show that the dwell times are almost independent of the barrier width as it is greater than a characteristic width W c . This can be ascribed that in the width range beyond W c , the tunneling probabilities through the barrier elements are very small, thus the times taken to tunnel through them make little contribution to the summation of the dwell times in all the barrier elements.
Various approaches have been used to calculate the quantum-mechanical tunneling time through potential barriers including the phase-delay method first introduced by Bohm and Wigner, Buttiker's analysis of the Larmor clock and its generalization, the dwell time of Smith, and numerical studies of wavepacket propagation through potential barriers among others. Most of those previous estimates have only dealt with the tunneling time through simple obstacles, including delta-potential scatterers and simple rectangular barriers under zero bias condition. Even for these simple cases, the agreement among the various estimates is far from being satisfactory. In this manuscript, the transmission line technique is employed to solve the time-dependent Schrodinger equation and an expression of the quantum-mechanical tunneling time is derived for an arbitrary potential profile under non zero bias condition. An exact analytical expression of the tunneling time through a rectangular barrier is derived and shown to be identical to the one obtained recently by Spiller et. al. using the Bohm's quantum potential approach. The tunneling time through resonant tunneling structures under zero bias is also calculated and is shown to be minimum at the quasi-boundstate energy. Finally, the quantum-mechanical tunneling time through the emitter-base junction of a typical heterojunction bipolar transistor is shown to be larger than its semiclassical counterpart.
Analytic expressions are given for the time spent by a particle tunneling through a potential barrier. The expressions are derived for an incident wave packet which is initially Gaussian, centered about a point an arbitrary distance away from a rectangular potential barrier and moving toward the barrier with constant average velocity. Upon collision with the barrier, the packet splits into a transmitted and a reflected packet. The resultant transmission time is positive, nonzero and in principle measurable. Although the transmission time becomes quite large as the incident kinetic energy becomes very small, in general, for nonzero incident momentum and finite potential barriers which are neither very thick nor very thin, the transmission times are less than the time that would be required for the incident particle to travel a distance equal to the barrier thickness. The transmission times for metal-insulator-metal thin film sandwiches, given approximately by δt3=ℏ/(Efφ)12, where Ef is the Fermi energy of the metal, and φ the vacuum work function, are of the order of 10−16 sec, compared to RC time constants of about 10−13 sec.
Tunneling phenomenon is one of the wondrous events that take place particularly in quantum mechanics and it has no counterpart in classical physics. We focus on its two important implications : tunneling time and tunneling probability. There has been no consensus on tunneling times among the tunneling time community for last seven decades. So far, most of the attempts to calculate tunneling times have apparently been centered on a simple rectangular barrier example. We implement the tunneling times with the most widely accepted approach, which is using physical Larmor clock, into a nonsymmetrical barrier and a double barrier. It results in different and unique insights into the usual understanding of tunneling time. Three characteristics tunneling time expressions are thoroughly studied in these quantum structures. The difference between dwell time and phase-delay time is once again approved. The unique characteristics of the phase-delay time, which was thought to be exactly similar to dwell time when we assign higher energies to the particles, is also revealed in the nonsymmetrical barrier that it should actually be regarded as a distinct feature from the dwell time. The singularity of reflection time in rectangular barrier is no longer valid in nonsymmetrical barrier. The finiteness of reflection time fairly shows that different quantum structures might bear some taboo breaking results. Since a double barrier involves much more complicated features and calculations, the calculation of tunneling times under this barrier is praiseworthy. The dwell time is the most crucial, troublesome and distinctive tunneling time element to look into for a double barrier. Besides the dwell and phase-delay time, we also calculate the three characteristic times as well as the reflection time for a double barrier. Another area that we study within the context of tunneling phenomenon is the tunneling probability. Recently, there has been ground shaking attempts in modifying the conventional WKB formulae. We follow one of the modified versions of WKB formulae in order to be able to calculate the tunneling probability through different quantum structures where conventional WKB formulae fail. These generalized WKB connection formulae are applied to some complex quantum potentials by seeking aid from the Green's function and the path integral approach. One of the biggest problems in quantum mechanics (visualization) is partially overcome through implementing the method of diagrammatic representations that make the life easier in understanding the events happening in the quantum world when we attempt to calculate the transmission and reflection probabilities. This part therefore has a pedagogical sense too in terms of interpreting the results in a diagrammatic way with the help of the path integral approach.
We derive a general expression for the tunneling time in layered systems based on the Larmor-clock approach. We show that our results are equivalent to those obtained by the Feynman path-integral technique. We establish a relation between functional derivatives of the barrier potential and partial derivatives with respect to the incident energy. In application, we computed the tunneling time and the reflection time for a rectangular barrier, for a double rectangular barrier, and for a Gaussian potential.
A clear consensus on how long it takes a particle to tunnel through a potential barrier has never been so urgently required, since the electron dynamics in strong-field ionization can be resolved on attosecond time-scale in experiment and the exact nature of the tunneling process is the key to trigger subsequent attosecond techniques. Here a general picture of tunneling time is suggested by introducing a quantum travel time, which is defined as the ratio of the travel distance to the expected value of the velocity operator under the barrier. Specially, if applied to rectangular barrier tunneling, it can retrieve the Büttiker-Landauer time τBLτ_{BL}τBL​ in the case of an opaque barrier, and has a clear physical meaning in the case of a very thin barrier wherein τBLτ_{BL}τBL​ can not be well defined. In the case of strong-field tunneling process, with the help of the newly defined time, the tunneling delay time measured by attoclock experiment can be interpreted as a travel time spent by the electron to tunnel from a point under the barrier to the tunnel exit. In addition, a peculiar oscillation structure in the wavelength dependence of tunneling delay time in deep tunneling regime is observed, which is beyond the scope of adiabatic tunneling picture. This oscillation structure can be attributed to the interference between the ground state tunneling channel and the excited states tunneling channels.