The development of nanostructures as components of macroscopic electrical circuits puts into evidence the necessity of providing integrated models of the entire system. The most natural approach is to represent such nanostructures by equivalent circuits to be imbedded in the model of the macroscopic structure. In the paper we discuss to which extent such a task can be accomplished and in particular how it fits the available circuit software for numerical simulations. We present as a meaningful example the circuit model for an atom, described as a two-state quantum system, coupled with a single mode cavity in a n-photon state; such a simple system describes a quantum oscillator realized by the interaction of the electromagnetic field with matter.
The development of nanostructures as components of macroscopic electrical circuits puts into evidence the necessity of providing integrated models of the entire system. The most natural approach is to represent such nanostructures by equivalent circuits to be imbedded in the model of the macroscopic structure. In the paper we discuss to which extent such a task can be accomplished and in particular how it fits the available circuit software for numerical simulations. We present as a meaningful example the circuit model for an atom, described as a two-state quantum system, coupled with a single mode cavity in a n-photon state; such a simple system describes a quantum oscillator realized by the interaction of the electromagnetic field with matter.
We propose a quantum simulation of a two-level atom coupled to a single mode of the electromagnetic field in the ultrastrong-coupling regime based upon resonant Raman transitions in an atom interacting with a high finesse optical cavity mode. We show by numerical simulation the possibility of realizing the scheme with a single rubidium atom, in which two hyperfine ground states make up the effective two-level system, and for cavity QED parameters that should be achievable with, for example, microtoroidal whispering-gallery-mode resonators. Our system also enables simulation of a generalized model in which a nonlinear coupling between the atomic inversion and the cavity photon number occurs on an equal footing with the (ultrastrong) dipole coupling and can give rise to critical-type behavior even at the single-atom level. Our model takes account of dissipation, and we pay particular attention to observables that would be readily observable in the output from the system.
In nanostructures where confinement of a light wave is manifested, the conditions of strong light–matter interaction become feasible. In this case, the approach based on the environment-sensitive probability of quantum transitions is no longer applicable. Instead, joint states of light and matter should be considered and their time evolution explored. The content of the previous Chapters 13 and 14 can then be treated as a perturbative description of light–matter interactions with a limited range of applicability. In this chapter a few representative examples are given where joint light–matter states bring an unprecedented flavor of nanophotonic engineering to frozen excited states for quantum memory devices and single photon sources for quantum computing. Cavity quantum electrodynamics in the strong coupling regime The regime of strong coupling of a quantum system with an electromagnetic field can be performed in a cavity with very high Q-factor, where light can survive for a reasonable time until it either leaves the cavity or dies through being absorbed by cavity imperfections. In a simplified picture, a photon once emitted stays within the cavity so long that it is absorbed again by the emitter (an imaginary two-level system, an atom or a quantum dot). Thus spontaneous emission appears to become reversible. In a more accurate presentation, an “atom+field” state develops which evolves via oscillations between the state | E , 0〉 (“excited atom, depleted cavity”) to the state | G , 1〉 (“de-excited atom, a photon in the cavity”).
The interaction of a two-level atom with a single-mode quantized field is one of the simplest models in quantum optics. Under the rotating wave approximation, it is known as the Jaynes-Cummings model and without it as the Rabi model. Real-world realizations of the Jaynes-Cummings model include cavity, ion trap and circuit quantum electrodynamics. The Rabi model can be realized in circuit quantum electrodynamics. As soon as nonlinear couplings are introduced, feasible experimental realizations in quantum systems are drastically reduced. We propose a set of two photonic lattices that classically simulates the interaction of a single two-level system with a quantized field under field nonlinearities and nonlinear couplings as long as the quantum optics model conserves parity. We describe how to reconstruct the mean value of quantum optics measurements, such as photon number and atomic energy excitation, from the intensity and from the field, such as von Neumann entropy and fidelity, at the output of the photonic lattices. We discuss how typical initial states involving coherent or displaced Fock fields can be engineered from recently discussed Glauber-Fock lattices. As an example, the Buck-Sukumar model, where the coupling depends on the intensity of the field, is classically simulated for separable and entangled initial states.
Within the framework of a two-dimensional microscopic, purely quantum mechanical model, we analyse the dynamics of single-photon wave packets interacting with optical elements (beam splitters, mirrors), modelled as systems of two-level atoms. That is, we utilize a two-dimensional cavity to simulate the quantum behaviour of simple optical components and networks made thereof. The field is quantized using the canonical procedure, and only the basis states with one unit of excitation are included. This, however, covers linear optical phenomena. The field is taken to interact with localized atoms through a dipole interaction. Using different configurations of atoms, and choosing their frequencies to be resonant or off-resonance, we can model mirrors, beam splitters, focusing devices and multicomponent systems. Thus we can model arbitrary linear networks of optical components. We show the time evolution of a photon wave packet in an interferometer as an example. As the state of the field is known at each instant, spectral properties and spatial coherence can immediately be obtained from the simulations. We also know the states of the two-level atoms constituting the components, which allows us to consider their quantum behaviour. Here the decay of an excited atom into the vacuum state of the electromagnetic field in the two-dimensional cavity is studied.
A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.