We present a brief overview of recent advances in the field of “slow light,” the field that studies means for controllably reducing the group velocity of light to values much smaller than its vacuum velocity,$c$. Some of the results summarized here include electrooptic modulation of single photons, all-optical switching within an atomic-vapor-filled hollow fiber, large induced phase shifts for microwave photonics, slow-light-enhanced nonlinear optical interactions, and highly controllable time delays in semiconductor optical amplifiers, parametric delay-dispersion tuners, and arrays of active microresonators
We present a brief overview of recent advances in the field of “slow light,” the field that studies means for controllably reducing the group velocity of light to values much smaller than its vacuum velocity,c. Some of the results summarized here include electrooptic modulation of single photons, all-optical switching within an atomic-vapor-filled hollow fiber, large induced phase shifts for microwave photonics, slow-light-enhanced nonlinear optical interactions, and highly controllable time delays in semiconductor optical amplifiers, parametric delay-dispersion tuners, and arrays of active microresonators
The control of the group velocity of optical signals has been widely demonstrated using various optical phenomena and different media. Slow and fast light is achieved in a controllable manner by modifying the refractive index dispersion through light induced modifications of the material or the structural properties of the medium. The potential for a continuous tuning of the phase or time delay of broadband microwave signals modulating the optical carrier opens previously unexplored horizons. The talk will review the recent advancements and the future directions of slow and fast light research with an emphasis on microwave-photonics applications.
The ability to manipulate the speed of light has recently become one of the most exciting emergent topics in optics. There are several experimental demonstrations showing the capability to slow down light more than six orders of magnitude in a variety of media, ranging from atomic vapor, solid state crystal, to semiconductors. These results have led to intensive research into new materials, devices, and system studies that examine their impact to new applications. It is believed that we are on the verge of a dramatic change in the way we envision and construct communication, processing and control systems. One direct application of slow and fast light devices is in the area of communications. One grand challenge remaining in information technology today is to store and buffer optical signals directly in optical format. As such, optical signals must be converted to electronic signals to route, switch, or be processed. This resulted in significant latencies and traffic congestions in current networks. In addition, keeping the data in optical domain during the routing process can greatly reduce the power, complexity and size of the routers. To this end, a controllable optical delay line can effectively function as an optical buffer, and the storage is proportional to the variability of the group velocity. In addition to optical buffers, slow and fast light devices can be used as tunable true-time delay elements in microwave photonics, which are important for remotely controlling phased array antenna. Other novel applications include nonlinear optics, optical signal processing, and quantum information processing. There are various approaches that can be used to vary the optical group velocity. Ultraslow or fast group velocity may result from a large material dispersion, waveguide dispersion, or both. In this paper, the authors provide a review of recent progress of slow and fast light using semiconductor devices. Specifically, they will discuss results obtained using semiconductor quantum-well/quantum-dot absorber and optical amplifiers. Slow and fast light are controllable electrically by changing the bias current or voltage as well as optically by changing the pump laser intensity and wavelength. Delay-bandwidth tradeoff and other figures of merits are analyzed
The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.
Slow light is light that travels at unusual, extreme group velocities—sometimes as slow as walking speed or slower. Light waves can be described by many velocities, but for a narrow-band pulse of light (a carrier frequency modulated by an envelope), the group velocity is the speed of the pulse envelope. The term slow light also encompasses other exotic group velocities due to similar techniques, including fast light, stopped light, and backwards light. The science of slow light has been established over the past several years, and research attention is now turning to potential applications of slow light. One application of slow light is as an all-optical true-time delay. Two slow light methods in optical fibers, stimulated Brillouin scattering (SBS) and dispersive delay, are used to provide a controllable pulse delay in a prototype slow-light phased-array laser radar, called SLIDAR. These slow light methods compensate the group delay mismatch of pulses of 6 ns duration while the phased array is steered in two dimensions. A phase control system is described that maintains phase lock among three signal channels and a reference channel, each containing 2.2 km of optical fiber, while accommodating the demands of the slow light techniques. Residual phase error is kept below π /5 radians (1/10 wave) RMS. Slow light can also enhance the spectral sensitivity of spectrometers and interferometers. A design for a slow-light-enhanced nanophotonic spectrometer is presented. One important use of spectrometers is to detect specific chemicals, and I describe an approach to multivariate optical computation, which can be used for automatic chemical spectrum recognition. This technique, which could one day be implemented with a slow-light-enhanced spectrometer as a single-chip chemical detection platform, is explored experimentally in the visible spectrum using a spatial light modulator.
Research into slow light began theoretically in 1880 with the paper [1] of H A Lorentz, who is best known for his work on relativity and the speed of light. Experimental work started some 60 years later with the work of S L McCall and E L Hahn [2] who explored non-linear self-induced transparency in ruby. This field of research has burgeoned in the last 10 years, starting with the work of L Vestergaard Hau and coworkers on slow light via electromagnetically induced transparency in a Bose–Einstein condensate [3]. Many groups are now able to slow light down to a few metres per second or even stop the motion of light entirely [4]. Today, slow light – or more often `slow and fast light' – has become its own vibrant field with a strongly increasing number of publications. In broad scope, slow light research can be categorized in terms of the sort of physical mechanism used to slow down the light. One sort of slow light makes use of material dispersion. This dispersion can be the natural dispersion of the ordinary refractive index or can be the frequency dependence of some nonlinear optical process, such as electromagnetically induced transparency, coherent population oscillations, stimulated light scattering, or four-wave mixing processes. The second sort of slow light makes use of the wavelength dependence of artificially structured materials, such as photonic crystals, optical waveguides, and collections of microresonators. Material systems in which slow light has been observed include metal vapours, rare-earth-doped materials, Raman and Brillioun gain media, photonic crystals, microresonators and, more recently, metamaterials. A common feature of all of these schemes is the presence of a sharp single resonance or multiple resonances produced by an atomic transition, a resonance in a photonic structure, or in a nonlinear optical process. Current applications of slow light include a series of attractive topics in optical information processing, such as optical data storage, optical memories, quantum information devices, and optical communication systems in which the use of slow light will allow all-optical processing with less wasted heat. To implement these applications, devices such as buffers, memories, interferometers and switches that utilize slow light need to be developed. Future challenges include the need for improved coupling of light into slow light modes, overcoming propagation losses, and mitigating the influence of large dispersion of the group velocity. The collection of papers in this special issue of Journal of Optics features a broad spectrum of articles that highlight actual developments in many of the material types and schemes described above. It represents therefore an excellent up to date snapshot of the current state of the field of slow light research. References [1] Lorentz H A 1880 Uber die Beziehung zwischen der Fortpflanzung des Lichtes und der Körperdichte Wiedemann Ann. 9 641–64 [2] McCall S L and Hahn E L 1967 Self-induced transparency by pulsed coherent light Phys. Rev. Lett. 18 908–11 [3] Vestergaard Hau L, Harris S E, Dutton Z and Behroozi C H 1999 Nature 397 594 [4] Philips D F, Fleischhauer A, Mair A, Walsworth R L and Lukin M D 2001 Storage of light in atomic vapor Phys. Rev. Lett. 86 783–6