Inspired by the spectacular successes in the field of cold atoms, there is currently great interest in cold molecules. Cooling molecules is useful for various fundamental physics studies and gives access to an exotic regime in chemistry where the wave property of the molecules becomes important. Although cooling molecules has turned out to be considerably more difficult than cooling atoms, a number of methods to produce samples of cold molecules have been demonstrated over the last few years. This paper aims to review the application of cold molecules and the methods to produce them. Emphasis is put on the deceleration of polar molecules using time-varying electric fields. The operation principle of the array of electrodes that is used to decelerate polar molecules is described in analogy with, and using terminology from, charged-particle accelerators. It is shown that, by applying an appropriately timed high voltage burst, molecules can be decelerated while the phase-space density, i.e. the number of molecules per position-velocity interval, remains constant. In this way the high density and low temperature in the moving frame of a pulsed molecular beam can be transferred to the laboratory frame. Experiments on metastable CO in states that are either repelled by or attracted to high electric fields are presented. Loading of slow molecules into traps and storage rings is discussed.
Inspired by the spectacular successes in the field of cold atoms, there is currently great interest in cold molecules. Cooling molecules is useful for various fundamental physics studies and gives access to an exotic regime in chemistry where the wave property of the molecules becomes important. Although cooling molecules has turned out to be considerably more difficult than cooling atoms, a number of methods to produce samples of cold molecules have been demonstrated over the last few years. This paper aims to review the application of cold molecules and the methods to produce them. Emphasis is put on the deceleration of polar molecules using time-varying electric fields. The operation principle of the array of electrodes that is used to decelerate polar molecules is described in analogy with, and using terminology from, charged-particle accelerators. It is shown that, by applying an appropriately timed high voltage burst, molecules can be decelerated while the phase-space density, i.e. the number of molecules per position-velocity interval, remains constant. In this way the high density and low temperature in the moving frame of a pulsed molecular beam can be transferred to the laboratory frame. Experiments on metastable CO in states that are either repelled by or attracted to high electric fields are presented. Loading of slow molecules into traps and storage rings is discussed.
What we experience as an agreeable temperature is in fact due to a constant bombardment of our skin by very fast molecules. At room temperature the average velocity of air molecules around us is about 500 m/s, corresponding to about 2000 km/hour. Only at very low temperatures, close to the absolute zero (0 K = -273.15 C), will the molecules come to rest. The high velocities at ordinary temperatures limit our ability to study the molecules. This thesis describes a method to slow down a beam of polar molecules using time-varying electric fields. When the molecules are decelerated to low velocities they will have insufficient kinetic energy to escape from the electric fields, and they will be trapped. In this way molecules can be stored and studied over long periods of time. This thesis is organized as follows: In chapter I the motivation for studying cold molecules is made more explicit, and an overview is given of other methods to cool molecules. In Chapter II the interaction between molecules and electric fields is outlined. In Chapter III and IV deceleration of a beam of metastable CO is presented, using molecules in states which are either repelled by, or attracted to high electric fields. Finally, in Chapter V ammonia molecules are brought to a standstill and subsequently held in an electrostatic trap
Research of cold and ultracold molecules is currently a burgeoning field in experimental and theoretical physics. New experimental techniques, involving an increasingly large set of molecule types under high levels of control, are currently opening up new avenues of research with a vast array of potential applications. From understanding the role of quantum mechanics in molecular scattering and cold chemistry, to testing the fundamental symmetries of nature and realizing quantum computing with dipolar molecular qubits, experiments are accessing regimes not dreamed of even a few years ago. Theoretical interest and computing capabilities are also at an all time high, spurred on by the possibility of creating ultracold dipolar gases as tunable realizations of strongly interacting quantum Hamiltonians, creating exotic phases of matter, and the investigation of controlling molecular interactions with applied electromagnetic fields.\nLess than a decade ago, cold molecule experiments had seemingly reached a technological plateau, being capable of creating moderate densities of 106-107 molecules/cm3 at temperatures of 10-100 mK. With many applications requiring colder temperatures and higher densities, the field was ripe for new advances. Today, via a plethora of methods such as direct molecular laser cooling, electro-optical cooling, magneto- and photo-association, and new molecular beam deceleration techniques, the field is just beginning to have the tools capable of producing truly interesting systems for study.\nThis work will discuss a couple of major steps taken in the direction of achieving scientific goals using cold molecules. The first experimental advancement discussed will be the development of a co-trap environment for studying interactions and collisions between ultracold atoms and Stark decelerated cold polar molecules. In this experiment, rubidium atoms are trapped using magnetic fields, and ammonia atoms are decelerated and trapped using electric fields. The two traps are spatially overlapped in order to investigate inter-species interactions. The co-trap environment provides exceedingly long interaction times, many orders of magnitude longer than typical beam-based interaction studies. As a result, it provides extremely high sensitivity to weak interaction mechanisms. The second experimental advancement discussed will be the development and construction of a new style of Stark decelerator, capable of producing much larger densities of cold molecules. This apparatus has the potential to expand the realm of possible experiments with chemically interesting species, and provide an unprecedented amount of control over molecular beams and traps. The gains haven't come easily though, as a new class of custom high-voltage amplifiers have needed to be developed. This part of the experiment alone took approximately two years of consistent effort to bring to fruition. After many years of development, this experiment is poised to come online, finally fulfilling its potential.
Slowing down atoms using laser cooling, together with techniques like magnetic trapping and evaporative cooling, has led to numerous exciting results over the last decade [1], with the realization of Bose-Einstein condensation as the most spectacular achievement [2]. Laser-cooling schemes are applicable to atoms since closed multilevel systems can be realized and many consecutive absorptionemission cycles can be induced. This leads to a significant momentum transfer from the photons of the laser to the atom, resulting in a change of the velocity of the atom. There currently is a great interest in producing cold molecules for the study of cold molecule-molecule collisions, molecular quantum collective effects, Doppler-free spectroscopy, frequency standards, as well as many other applications already realized for atoms [3]. Slowing down of neutral molecules, a prerequisite for being able to trap them, has proven to be considerably more difficult to be achieved, however. The above-mentioned laser-cooling scheme cannot be applied to slow down molecules as no simple closed-level systems can be found; the unavoidable off-resonant radiative decay of molecules from the excited state to other vibrational levels in the electronic ground state hampers efficient momentum transfer [4]. Once molecules are present at sufficiently low kinetic energies, below a fraction of a cm21, they can be trapped in various ways. Trapping of neutral molecules in inhomogeneous magnetic [3] and electric fields [5] and trapping based on the use of evanescent fields close to the dielectricvacuum interface have been proposed [6]. It has also been suggested that extremely high laser powers might be used to induce a dipole moment in polarizable molecules, leading to trapping of these molecules in the laser beam [7]. Other methods to produce slow molecules have been put forward and have recently been successfully applied to produce the first samples of trapped molecules. By injecting molecules in a cold buffer gas, sufficiently low kinetic energies of the injected molecules can be obtained after thermalization that they can subsequently be trapped in an inhomogeneous magnetic field. This has recently been demonstrated for CaH injected in 3He buffer gas at temperatures of around 0.3 K [8]. Associative collisions between ultracold trapped atoms [9] have proven to be
The growing field of cold molecule physics has demonstrated many methods of quantum control for precision measurement and molecular interaction studies. One particular method is Stark deceleration, which uses electric field gradients to produce packets of slow polar molecules. Since Stark deceleration does not increase phase-space density, the efficiency of the deceleration process is critical in determining the final cold molecule density. This dissertation describes three different Stark deceleration techniques. The first type of deceleration is pulsed-pin deceleration. We use this technique to produce slow OH molecules that can be trapped for cold collision studies. A two photon state-selective detection system, which includes a 118 nm photon, is used to determine the density distribution of OH in the trap. We explore the advantages and limitations to creating 118 nm light. The second and third types of Stark deceleration are pulsed-ring and traveling-wave methods of running a ring-geometry decelerator. Ring-geometry decelerators present improved deceleration efficiencies due to the cylindrical symmetry of the electrodes and true three-dimensional confinement. The pulsed-ring mode of the ring decelerator uses commercial high-voltage switches to apply discrete pulses to the ring electrodes. The continuous operation mode of the ring decelerator uses varying sine-wave voltages to create a traveling Stark potential well and has proven to be incredibly challenging due to the analog high voltage requirements of the system. In order to bring ND3 seeded in krypton (∼415 m/s) down to rest in the laboratory, sine wave voltages with amplitudes up to ±10 kV, currents up to 500 mA, and a bandwidth of 30 kHz down to DC are required. We describe a high-voltage amplifier that can be used for traveling-wave deceleration. The traveling-wave Stark deceleration mode is then compared to the pulsed-ring Stark deceleration mode and cases where one mode is superior to another are discussed.
Research with cold molecules has developed rapidly in recent years. There is now a variety of established methods for cooling molecules into the millikelvin range. Nevertheless, a focal point of current research is directed toward finding new ways to bring the temperature of molecules even closer to absolute zero. Samples of cold molecules offer not only important applications for high-resolution spectroscopy, which benefit from the increased interaction time of slow molecules with electromagnetic radiation; they also promise access to an exotic regime of chemical reactivity, in which phenomena such as quantum tunneling and quantum resonances predominate. This review begins with an introduction to the methods by which cold molecules can be prepared, with special emphasis on Stark deceleration and traps. In addition to applications of cold molecules that have already been partially achieved, an important focus of the review concentrates on possible future applications, and both aspects are illustrated with selected examples.
Molecules in the low temperature limit offer fascinating research perspectives in physics and chemistry, and molecule cooling and deceleration has developed into a research field of its own.The grand challenge today is to prepare dense samples with ample cold molecules.Towards this end, we present an elegant solution to this problem by a nonconventional approach, employing the centrifugal force in a rotating frame to decelerate molecules to a standstill.The centrifuge deceleration is a generic method since its principle is not associated with any specific internal structure of the molecules.Moreover, electrostatic guiding of molecules is applied throughout the deceleration process, which enables for the first time the deceleration of continuous molecular beams to achieve unprecedented high fluxes of slow molecules.In a proof-ofprinciple experiment, we demonstrate fluxes of ∼ 10 9 molecules/s and densities of ∼ 10 8 molecules/cm 3 below k B •1 K in the laboratory frame, originated from a roomtemperature effusive beam source.The efficiency of this decelerator is measured to be up to 20%, outperforming all the existing molecular deceleration methods.The generality of this method is demonstrated by the deceleration of several polyatomic molecular species, CH 3 F, CF 3 H, and CF 3 CCH.In addition to presenting the basic principle and the results, we also describe thoroughly in this thesis the design of the centrifuge decelerator, optimized through Monte-Carlo trajectory simulations, and the technical assembly.The second focus of this thesis is on the development and implementation of a simple and robust internal-state thermometry method for cold polyatomic molecules.The method is based on the combination of resonant radio-frequency depletion spectroscopy and Monte Carlo trajectory simulations.The radio-frequency depletion spectroscopy is capable of addressing 100% of the rotational states populated by the cold polyatomic molecules, as well as resolving their hyperfine states.With this tool, various aspects of cryogenic buffer-gas cooling used as a source of internally cold molecules are characterized.The properties of the cold molecular beams obtained at different buffer-gas temperature, densities, and cooling regimes, are analyzed.The cooling processes for different polyatomic molecules are compared.These studies reveal also two interesting phenomena in the buffer-gas cooling process.Firstly, evidence is provided that molecular rotational degrees of freedom can thermalize more efficiently than their translational ones.Secondly, the measurements provide indications for dependence of the collisional relaxation rate on the rotational states of the molecules.