Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Achieving stabilization in interferometric logic operations

Andrey I. Zavalin, Joseph Shamir, Chandra S. Vikram, H. John Caulfield

Published Jan 10, 2006• 16 citations
Publisher

Abstract

Interferometric systems with amplitude beam splitters can implement reversible operations that, on detection, become Boolean operators. Being passive, they consume no energy, do not limit the operating bandwidth, and have negligible latency. Unfortunately, conventional interferometric systems are notoriously sensitive to uncontrolled disturbances. Here the use of polarization in a common-path interferometric logic gate with and without polarization beam splitters is explored as an attractive alternative to overcome those difficulties. Two of three device configurations considered offer significant stability and lower drive modulator voltage as advantages over the previous systems. The first experimental tests of such a system are reported. Common-path interferometry lends itself to even more stability and robustness by compatibility with no-air-gap, solid optics.

DOI
10.1364/ao.45.000360

Related papers

A variable partially polarizing beam splitter

Jefferson Flórez, Nathan J. Carlson, Codey H. Nacke +2 more

We present designs for variably polarizing beam splitters. These are beam splitters allowing the complete and independent control of the horizontal and vertical polarization splitting ratios. They have quantum optics and quantum information applications, such as quantum logic gates for quantum computing and non-local measurements for quantum state estimation. At the heart of each design is an interferometer. We experimentally demonstrate one particular implementation, a displaced Sagnac interferometer configuration, that provides an inherent instability to air currents and vibrations. Furthermore, this design does not require any custom-made optics but only common components which can be easily found in an optics laboratory.

arXiv:1709.05209•Review of Scientific Instruments•Feb 1, 2018•14 citations

Highly stable polarization independent Mach-Zehnder interferometer

Michal Mičuda, Ester Doláková, Ivo Straka +4 more

We experimentally demonstrate optical Mach-Zehnder interferometer utilizing displaced Sagnac configuration to enhance its phase stability. The interferometer with footprint of 27×40 cm offers individually accessible paths and shows phase deviation less than 0.4° during a 250 s long measurement. The phase drift, evaluated by means of Allan deviation, stays below 3° or 7 nm for 1.5 h without any active stabilization. The polarization insensitive design is verified by measuring interference visibility as a function of input polarization. For both interferometer's output ports and all tested polarization states the visibility stays above 93%. The discrepancy in visibility for horizontal and vertical polarization about 3.5% is caused mainly by undesired polarization dependence of splitting ratio of the beam splitter used. The presented interferometer device is suitable for quantum-information and other sensitive applications where active stabilization is complicated and common-mode interferometer is not an option as both the interferometer arms have to be accessible individually.

arXiv:1407.5207•Review of Scientific Instruments•Aug 1, 2014•27 citations

Probabilistic quantum logic operations using polarizing beam splitters

T. B. Pittman, B. C. Jacobs, J. D. Franson

It has previously been shown that probabilistic quantum logic operations may be performed using linear optical elements, additional photons (ancilla), and post-selection based on the output of single-photon detectors. Here we describe the operation of several quantum logic operations of an elementary nature, including a quantum parity check and a quantum encoder, and we show how they may be combined to implement a controlled-NOT (CNOT) gate. All of these gates may be constructed using polarizing beam splitters that completely transmit one state of polarization and totally reflect the orthogonal state of polarization, which allows a simple explanation of each operation. We also describe a polarizing beam splitter implementation of a CNOT gate that is closely analogous to the quantum teleportation technique previously suggested by Gottesman and Chuang [Nature 402, 390 (1999)]. Finally, our approach has the interesting feature that it makes practical use of a quantum-eraser technique.

arXiv:quant-ph/0107091•Physical Review A•Nov 16, 2001•434 citations

A feasible gate for scalable linear optics quantum computation using polarization optics

Kaoru Sanaka, Kevin J. Resch

Knill, Laflamme, and Milburn (KLM) proved that it is possible to build a scalable universal quantum computer using only linear-optics elements and conditional dynamics [Nature (London) {\bf 409}, 46 (2001)\cite{Knill}]. However, the practical realization of the quantum logic gate for the scheme is still technically difficult. A major difficulty is the requirement for sub-wavelength level stabilization of the interlocking interferometers. Following our recent experimental work[Phys. Rev. Lett.{\bf 92}, 017902 (2004)\cite{Sanaka2}], we describe a more feasible scheme to implement the gate that greatly reduces the experimental stability requirements. The scheme uses only polarizing beam splitters and half-wave plates.

arXiv:quant-ph/0312226•Dec 31, 2003•1 citation

Atom interferometry with polarizing beam splitters

H. Hinderthür, Andreas Pautz, F. Ruschewitz +2 more

A special kind of atomic beam splitter using a four-level atomic system in combination with polarized light fields is demonstrated. These specific atom optical elements are used to operate an atom interferometer where the beam-splitting mechanism acts selectively on specific paths only and therefore allows for several different interferometer geometries. Based on a Ramsey-Bord\'e configuration, the experimental data show considerably better accuracy and a contrast enhanced by 65% compared to the two-level interferometer. Our concept appears to be especially interesting in the context of metrological aspects in matter-wave interferometry.

Physical Review A•Jun 1, 1998•9 citations

A 14 × 14 μm2 footprint polarization-encoded quantum controlled-NOT gate based on hybrid waveguide

S. M. Wang, Qingqing Cheng, Yan-Xiao Gong +5 more

Photonic quantum information processing system has been widely used in communication, metrology and lithography. The recent emphasis on the miniaturized photonic platform is thus motivated by the urgent need for realizing large-scale information processing and computing. Although the integrated quantum logic gates and quantum algorithms based on path encoding have been successfully demonstrated, the technology for handling another commonly used polarization-encoded qubits has yet to be fully developed. Here, we show the implementation of a polarization-dependent beam-splitter in the hybrid waveguide system. With precisely design, the polarization-encoded controlled-NOT gate can be implemented using only single such polarization-dependent beam-splitter with the significant size reduction of the overall device footprint to 14 × 14 μm(2). The experimental demonstration of the highly integrated controlled-NOT gate sets the stage to develop large-scale quantum information processing system. Our hybrid design also establishes the new capabilities in controlling the polarization modes in integrated photonic circuits.

Nature Communications•May 4, 2016•61 citations
Interferometric systems with amplitude beam splitters can implement reversible operations that, on detection, become Boolean operators. Being passive, they consume no energy, do not limit the operating bandwidth, and have negligible latency. Unfortunately, conventional interferometric systems are notoriously sensitive to uncontrolled disturbances. Here the use of polarization in a common-path interferometric logic gate with and without polarization beam splitters is explored as an attractive alternative to overcome those difficulties. Two of three device configurations considered offer significant stability and lower drive modulator voltage as advantages over the previous systems. The first experimental tests of such a system are reported. Common-path interferometry lends itself to even more stability and robustness by compatibility with no-air-gap, solid optics.
We present designs for variably polarizing beam splitters. These are beam splitters allowing the complete and independent control of the horizontal and vertical polarization splitting ratios. They have quantum optics and quantum information applications, such as quantum logic gates for quantum computing and non-local measurements for quantum state estimation. At the heart of each design is an interferometer. We experimentally demonstrate one particular implementation, a displaced Sagnac interferometer configuration, that provides an inherent instability to air currents and vibrations. Furthermore, this design does not require any custom-made optics but only common components which can be easily found in an optics laboratory.
We experimentally demonstrate optical Mach-Zehnder interferometer utilizing displaced Sagnac configuration to enhance its phase stability. The interferometer with footprint of 27×40 cm offers individually accessible paths and shows phase deviation less than 0.4° during a 250 s long measurement. The phase drift, evaluated by means of Allan deviation, stays below 3° or 7 nm for 1.5 h without any active stabilization. The polarization insensitive design is verified by measuring interference visibility as a function of input polarization. For both interferometer's output ports and all tested polarization states the visibility stays above 93%. The discrepancy in visibility for horizontal and vertical polarization about 3.5% is caused mainly by undesired polarization dependence of splitting ratio of the beam splitter used. The presented interferometer device is suitable for quantum-information and other sensitive applications where active stabilization is complicated and common-mode interferometer is not an option as both the interferometer arms have to be accessible individually.
It has previously been shown that probabilistic quantum logic operations may be performed using linear optical elements, additional photons (ancilla), and post-selection based on the output of single-photon detectors. Here we describe the operation of several quantum logic operations of an elementary nature, including a quantum parity check and a quantum encoder, and we show how they may be combined to implement a controlled-NOT (CNOT) gate. All of these gates may be constructed using polarizing beam splitters that completely transmit one state of polarization and totally reflect the orthogonal state of polarization, which allows a simple explanation of each operation. We also describe a polarizing beam splitter implementation of a CNOT gate that is closely analogous to the quantum teleportation technique previously suggested by Gottesman and Chuang [Nature 402, 390 (1999)]. Finally, our approach has the interesting feature that it makes practical use of a quantum-eraser technique.
Knill, Laflamme, and Milburn (KLM) proved that it is possible to build a scalable universal quantum computer using only linear-optics elements and conditional dynamics [Nature (London) {\bf 409}, 46 (2001)\cite{Knill}]. However, the practical realization of the quantum logic gate for the scheme is still technically difficult. A major difficulty is the requirement for sub-wavelength level stabilization of the interlocking interferometers. Following our recent experimental work[Phys. Rev. Lett.{\bf 92}, 017902 (2004)\cite{Sanaka2}], we describe a more feasible scheme to implement the gate that greatly reduces the experimental stability requirements. The scheme uses only polarizing beam splitters and half-wave plates.
A special kind of atomic beam splitter using a four-level atomic system in combination with polarized light fields is demonstrated. These specific atom optical elements are used to operate an atom interferometer where the beam-splitting mechanism acts selectively on specific paths only and therefore allows for several different interferometer geometries. Based on a Ramsey-Bord\'e configuration, the experimental data show considerably better accuracy and a contrast enhanced by 65% compared to the two-level interferometer. Our concept appears to be especially interesting in the context of metrological aspects in matter-wave interferometry.
Photonic quantum information processing system has been widely used in communication, metrology and lithography. The recent emphasis on the miniaturized photonic platform is thus motivated by the urgent need for realizing large-scale information processing and computing. Although the integrated quantum logic gates and quantum algorithms based on path encoding have been successfully demonstrated, the technology for handling another commonly used polarization-encoded qubits has yet to be fully developed. Here, we show the implementation of a polarization-dependent beam-splitter in the hybrid waveguide system. With precisely design, the polarization-encoded controlled-NOT gate can be implemented using only single such polarization-dependent beam-splitter with the significant size reduction of the overall device footprint to 14 × 14 μm(2). The experimental demonstration of the highly integrated controlled-NOT gate sets the stage to develop large-scale quantum information processing system. Our hybrid design also establishes the new capabilities in controlling the polarization modes in integrated photonic circuits.