© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Reviews of Modern Physics

Preparation, measurement and information capacity of optical quantum states

Y. Yamamoto, H. A. Haus

Published Oct 1, 1986• 447 citations

Abstract

The preparation, or generation of coherent states, squeezed states, and photon number states is discussed. The quantum noise is evaluated for various simultaneous measurements of two quadrature components: heterodyning, the beam splitter followed by two single quadrature measurements, the parametric amplifier, the (degenerate and/or nondegenerate) four-wave mixer, the Brillouin and Raman amplifiers, and the laser amplifier. A quantum nondemolition measurement followed by a measurement of the conjugate variable is also categorized as a simultaneous measurement. It is shown that, for all of these schemes, the minimum uncertainty product of the measured variables is exactly equal to that required for a simultaneous measurement of two noncommuting variables. On the other hand, measurements of a single quadrature component are noise-free. Such measurements are degenerate heterodyning, degenerate parametric amplification, and cavity degenerate four-wave mixing and photon counting by a photomultiplier or avalanche photodiode. The Heisenberg uncertainty principle and the quantum-mechanical channel capacity of Shannon are discussed to address the question "How much information can be transmitted by a single photon?" The quantum-mechanical channel capacity provides an upper bound on the achievable information capacity and is ideally realized by photon number states and photon counting detection. Its value is $\frac{\ensuremath{\hbar}\ensuremath{\omega}}{(\mathrm{ln}2)kT}$ bit per photon. The use of coherent or squeezed states and a simultaneous measurement of two quadrature field components or the measurement of one single quadrature field component does not achieve the ultimate limit.

DOI: 10.1103/revmodphys.58.1001

Related papers

Squeezed states: an overview

Bernard Yurke

A squeezed state of the electromagnetic field has less noise in one of its two amplitude components than that of a coherent state. This property makes squeezed states potentially useful in low noise and precision measurement. Squeezed states may be generated by, among other things, degenerate parametric amplifiers and four-wave mixers. The reduced noise in one of the amplitude components is most easily observed via a homodyne detector. A number of experimental efforts to generate and detect squeezed states are under way. Here, in describing experimental techniques, the experiments' carried out by Slusher et al. are emphasized. A number of techniques were employed to successfully generate squeezed light. An atomic beam of sodium provided the optical nonlinearity in a cavity-backward four-wave mixer. By employing pairs of Fabry-Perot modes spaced symmetrically about the pump frequency, squeezed light was generated in nondegenerate conditions where Rayleigh scattering of pump light could be avoided. To observe squeezing, a number of nonidealities such as phase jitter and detector inefficiencies also had to be overcome.

Annual Meeting Optical Society of America•Jan 1, 1986•0 citations

Generation of number-phase minimum-uncertainty states and number states

Y. Yamamoto, S. Machida, N. Imoto +2 more

The difference between the two nonclassical photon states, i.e., the squeezed state and the number-phase minimum-uncertainty state, is discussed. Four different generation principles for number-phase minimum-uncertainty states (and number states) are described. They are the following: (1) unitary evolution, using self-phase modulation and interference; (2) nonunitary state reduction, using either quantum nondemolition photon-number measurement or parametrically amplified idler-wave photon counting; (3) negative-feedback oscillators, incorporating a correlated photon-pair generator; and (4) pump-amplitude noise-suppressed lasers. A number-phase minimum-uncertainty state with photon-number noise reduced to 1 dB (20%) below the standard quantum limit in a frequency range over 100 MHz was produced by the fourth-generation principle.

Journal of the Optical Society of America B•Oct 1, 1987•70 citations

Preparing and characterizing quantum states of light using photon-number-resolving detectors

Guillaume Thekkadath

A longstanding goal in quantum optics has been to realize a photon-number-resolving detector that efficiently counts the number of photons in an optical field. This goal has been largely met with the development of transition edge sensors which can count up to roughly 20 photons with efficiencies over 95%. This thesis presents three experiments that employ these detectors to characterize and prepare quantum states of light. Firstly, we develop a weak-field homodyne detector. By replacing the photodiodes conventionally used in homodyne detection with transition edge sensors, we experimentally implement a versatile measurement device that can tune between photon counting and quadrature measurements. We study the transition between these complementary measurement regimes and determine the minimum local oscillator strength needed to perform quadrature measurements. Secondly, we use the weak-field homodyne detector as a quantum state engineering tool. We propose a scheme to prepare a wide range of definite parity states, including two- and four-component Schrödinger cat states of arbitrary size with nearly perfect fidelity. Thirdly, we perform optical interferometry using quantum states of light with the aim of surpassing the maximal precision achievable with classical light, i.e. the shot-noise limit. We propose and experimentally implement a scheme that uses high-gain squeezed vacuum sources and transition edge sensors to prepare loss-tolerant entangled states containing up to 8 photons. While our achieved precision does not unconditionally (i.e. without post-selecting on certain measurement trials) surpass the shot-noise limit, our results do demonstrate the robustness of these entangled states to loss despite their size.

•Jan 1, 2020•0 citations

Quantum-mechanical noise in an interferometer

Carlton M. Caves

The interferometers now being developed to detect gravitational waves work by measuring the relative positions of widely separated masses. Two fundamental sources of quantum-mechanical noise determine the sensitivity of such an interferometer: (i) fluctuations in number of output photons (photon-counting error) and (ii) fluctuations in radiation pressure on the masses (radiation-pressure error). Because of the low power of available continuous-wave lasers, the sensitivity of currently planned interferometers will be limited by photon-counting error. This paper presents an analysis of the two types of quantum-mechanical noise, and it proposes a new technique---the "squeezed-state" technique---that allows one to decrease the photon-counting error while increasing the radiation-pressure error, or vice versa. The key requirement of the squeezed-state technique is that the state of the light entering the interferometer's normally unused input port must be not the vacuum, as in a standard interferometer, but rather a "squeezed state"---a state whose uncertainties in the two quadrature phases are unequal. Squeezed states can be generated by a variety of nonlinear optical processes, including degenerate parametric amplification.

Physical review. D. Particles, fields, gravitation, and cosmology/Physical review. D. Particles and fields•Apr 15, 1981•3,202 citations

Complement 5A: Squeezed states of light: the reduction of quantum fluctuations

G. Grynberg, Alain Aspect, Claude Fabre +1 more

We showed in Section 5.2 of the present chapter that according to quantum theory the value of the electric field of an electromagnetic wave could not be predicted to arbitrarily high precision, this being a consequence of the uncertainty relation satisfied by the two quadrature components of the field (Equation 5.32), which imposed a finite limit on the product of their variances. This limit is more than an abstract theoretical limit; it is often the overriding factor determining the resolution of high-precision optical measurements. In such situations measurements by photodetectors on the field exhibit uncontrollable fluctuations of quantum origin known as quantum noise . Fortunately, as we shall show in this complement, it is possible to overcome this by using non-classical states of the radiation field, namely the squeezed states , provided measurements are made of a single one of a pair of conjugate field variables. A field mode prepared in such a state exhibits reduced quantum noise in one of the variables at the expense of increased noise in the other, so that the uncertainty relation involving their variances is still satisfied. The potential of such states for increasing the obtainable precision of optical measurements is self-evident. However, the practical realization of the potential benefits requires delicate experimental techniques that we describe only briefly here.

Cambridge University Press eBooks•Sep 2, 2010•0 citations

Observation of Squeezed States Generated by Four-Wave Mixing in an Optical Cavity

R. E. Slusher, Leo W. Hollberg, Bernard Yurke +2 more

Squeezed states of the electromagnetic field have been generated by nondegenerate four-wave mixing due to Na atoms in an optical cavity. The optical noise in the cavity, comprised of primarily vacuum fluctuations and a small component of spontaneous emission from the pumped Na atoms, is amplified in one quadrature of the optical field and deamplified in the other quadrature. These quadrature components are measured with a balanced homodyne detector. The total noise level in the deamplified quadrature drops below the vacuum noise level.

Physical Review Letters•Nov 25, 1985•1,907 citations

The preparation, or generation of coherent states, squeezed states, and photon number states is discussed. The quantum noise is evaluated for various simultaneous measurements of two quadrature components: heterodyning, the beam splitter followed by two single quadrature measurements, the parametric amplifier, the (degenerate and/or nondegenerate) four-wave mixer, the Brillouin and Raman amplifiers, and the laser amplifier. A quantum nondemolition measurement followed by a measurement of the conjugate variable is also categorized as a simultaneous measurement. It is shown that, for all of these schemes, the minimum uncertainty product of the measured variables is exactly equal to that required for a simultaneous measurement of two noncommuting variables. On the other hand, measurements of a single quadrature component are noise-free. Such measurements are degenerate heterodyning, degenerate parametric amplification, and cavity degenerate four-wave mixing and photon counting by a photomultiplier or avalanche photodiode. The Heisenberg uncertainty principle and the quantum-mechanical channel capacity of Shannon are discussed to address the question "How much information can be transmitted by a single photon?" The quantum-mechanical channel capacity provides an upper bound on the achievable information capacity and is ideally realized by photon number states and photon counting detection. Its value is

\frac{\ensuremath{\hbar}\ensuremath{\omega}}{(\mathrm{ln}2)kT}

bit per photon. The use of coherent or squeezed states and a simultaneous measurement of two quadrature field components or the measurement of one single quadrature field component does not achieve the ultimate limit.

A squeezed state of the electromagnetic field has less noise in one of its two amplitude components than that of a coherent state. This property makes squeezed states potentially useful in low noise and precision measurement. Squeezed states may be generated by, among other things, degenerate parametric amplifiers and four-wave mixers. The reduced noise in one of the amplitude components is most easily observed via a homodyne detector. A number of experimental efforts to generate and detect squeezed states are under way. Here, in describing experimental techniques, the experiments' carried out by Slusher et al. are emphasized. A number of techniques were employed to successfully generate squeezed light. An atomic beam of sodium provided the optical nonlinearity in a cavity-backward four-wave mixer. By employing pairs of Fabry-Perot modes spaced symmetrically about the pump frequency, squeezed light was generated in nondegenerate conditions where Rayleigh scattering of pump light could be avoided. To observe squeezing, a number of nonidealities such as phase jitter and detector inefficiencies also had to be overcome.

The difference between the two nonclassical photon states, i.e., the squeezed state and the number-phase minimum-uncertainty state, is discussed. Four different generation principles for number-phase minimum-uncertainty states (and number states) are described. They are the following: (1) unitary evolution, using self-phase modulation and interference; (2) nonunitary state reduction, using either quantum nondemolition photon-number measurement or parametrically amplified idler-wave photon counting; (3) negative-feedback oscillators, incorporating a correlated photon-pair generator; and (4) pump-amplitude noise-suppressed lasers. A number-phase minimum-uncertainty state with photon-number noise reduced to 1 dB (20%) below the standard quantum limit in a frequency range over 100 MHz was produced by the fourth-generation principle.

A longstanding goal in quantum optics has been to realize a photon-number-resolving detector that efficiently counts the number of photons in an optical field. This goal has been largely met with the development of transition edge sensors which can count up to roughly 20 photons with efficiencies over 95%. This thesis presents three experiments that employ these detectors to characterize and prepare quantum states of light. Firstly, we develop a weak-field homodyne detector. By replacing the photodiodes conventionally used in homodyne detection with transition edge sensors, we experimentally implement a versatile measurement device that can tune between photon counting and quadrature measurements. We study the transition between these complementary measurement regimes and determine the minimum local oscillator strength needed to perform quadrature measurements. Secondly, we use the weak-field homodyne detector as a quantum state engineering tool. We propose a scheme to prepare a wide range of definite parity states, including two- and four-component Schrödinger cat states of arbitrary size with nearly perfect fidelity. Thirdly, we perform optical interferometry using quantum states of light with the aim of surpassing the maximal precision achievable with classical light, i.e. the shot-noise limit. We propose and experimentally implement a scheme that uses high-gain squeezed vacuum sources and transition edge sensors to prepare loss-tolerant entangled states containing up to 8 photons. While our achieved precision does not unconditionally (i.e. without post-selecting on certain measurement trials) surpass the shot-noise limit, our results do demonstrate the robustness of these entangled states to loss despite their size.

The interferometers now being developed to detect gravitational waves work by measuring the relative positions of widely separated masses. Two fundamental sources of quantum-mechanical noise determine the sensitivity of such an interferometer: (i) fluctuations in number of output photons (photon-counting error) and (ii) fluctuations in radiation pressure on the masses (radiation-pressure error). Because of the low power of available continuous-wave lasers, the sensitivity of currently planned interferometers will be limited by photon-counting error. This paper presents an analysis of the two types of quantum-mechanical noise, and it proposes a new technique---the "squeezed-state" technique---that allows one to decrease the photon-counting error while increasing the radiation-pressure error, or vice versa. The key requirement of the squeezed-state technique is that the state of the light entering the interferometer's normally unused input port must be not the vacuum, as in a standard interferometer, but rather a "squeezed state"---a state whose uncertainties in the two quadrature phases are unequal. Squeezed states can be generated by a variety of nonlinear optical processes, including degenerate parametric amplification.

We showed in Section 5.2 of the present chapter that according to quantum theory the value of the electric field of an electromagnetic wave could not be predicted to arbitrarily high precision, this being a consequence of the uncertainty relation satisfied by the two quadrature components of the field (Equation 5.32), which imposed a finite limit on the product of their variances. This limit is more than an abstract theoretical limit; it is often the overriding factor determining the resolution of high-precision optical measurements. In such situations measurements by photodetectors on the field exhibit uncontrollable fluctuations of quantum origin known as quantum noise . Fortunately, as we shall show in this complement, it is possible to overcome this by using non-classical states of the radiation field, namely the squeezed states , provided measurements are made of a single one of a pair of conjugate field variables. A field mode prepared in such a state exhibits reduced quantum noise in one of the variables at the expense of increased noise in the other, so that the uncertainty relation involving their variances is still satisfied. The potential of such states for increasing the obtainable precision of optical measurements is self-evident. However, the practical realization of the potential benefits requires delicate experimental techniques that we describe only briefly here.

Squeezed states of the electromagnetic field have been generated by nondegenerate four-wave mixing due to Na atoms in an optical cavity. The optical noise in the cavity, comprised of primarily vacuum fluctuations and a small component of spontaneous emission from the pumped Na atoms, is amplified in one quadrature of the optical field and deamplified in the other quadrature. These quadrature components are measured with a balanced homodyne detector. The total noise level in the deamplified quadrature drops below the vacuum noise level.