Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Communications Letters

A Hybrid Decoding Scheme for Short Non-Binary LDPC Codes

Marco Baldi, Franco Chiaraluce, Nicola Maturo, Gianluigi Liva, Enrico Paolini

Published Nov 4, 2014• 27 citations
Publisher

Abstract

In this paper, an iterative soft-decision hybrid decoding algorithm for non-binary low-density parity-check (LDPC) codes with short codeword lengths is proposed. The rationale of the approach is to combine the classical belief propagation (BP) iterative LDPC decoding algorithm with the most reliable basis (MRB) decoding algorithm. This allows to achieve significant performance improvements, with a complexity that, for medium/low error rates, is only slightly higher than that of the BP algorithm alone. The performance improvement with respect to pure BP decoding is up to 0.7 dB at codeword error rate (CER) ≈ 10-5. Notably, for a fixed MRB order, hybrid decoding achieves a gain up to 0.5 dB at CER ≈ 10-5with respect to BP decoding and MRB decoding used alone.

DOI
10.1109/lcomm.2014.2367097

Related papers

Iterative reliability-based decoding of low-density parity check codes

M.P.C. Fossorier

In this paper, reliability based decoding is combined with belief propagation (BP) decoding for low-density parity check (LDPC) codes. At each iteration, the soft output values delivered by the BP algorithm are used as reliability values to perform reduced complexity soft decision decoding of the code considered. This approach allows to bridge the error performance gap between belief propagation decoding which remains suboptimum, and maximum likelihood decoding which is too complex to be implemented for the codes considered. Trade-offs between decoding complexity and error performance are also investigated. In particular, a stopping criterion which reduces the average number of iterations at the expense of very little performance degradation is proposed for this combined decoding approach. Simulation results for several Gallager (1963, 1968) LDPC codes and different set cyclic codes of hundreds of information bits are given and elaborated.

IEEE Journal on Selected Areas in Communications•May 1, 2001•167 citations

Iterative reliability based decoding of LDPC codes

M.P.C. Fossorier

In this work, reliability based decoding is combined with belief propagation (BP) decoding for low-density parity check (LDPC) codes. At each iteration, the soft output values delivered by the BP algorithm are used as reliability values to perform reduced complexity soft decision decoding of the code considered. This approach allows to bridge the error performance gap between BP decoding which remains suboptimum, and maximum likelihood decoding (MLD) which is too complex to be implemented for the codes considered. A stopping criterion which reduces the average number of iterations at the expense of very little performance degradation is also proposed for this combined decoding approach. Simulations results for several Gallager LDPC codes and different set cyclic (DSC) codes of hundreds of information bits are given and elaborated.

IEEE International Symposium on Information Theory (ISIT)•Nov 13, 2002•4 citations

Effective BP-ORBGRAND Scheme for Short LDPC Codes

Qing Yuan, Lingjun Kong, Tengda Yang +2 more

Low-density parity-check (LDPC) codes have been widely used in practice due to their excellent error correction capabilities. However, the error correction performance of traditional decoding algorithms for LDPC codes is limited under short block lengths. To address this problem, this paper proposes an effective scheme that contains two stages for decoding short LDPC codes. In the first stage, the traditional belief propagation (BP) iterative algorithm is used to decode an LDPC code. The decoding process terminates if a codeword is obtained in this stage. Otherwise, the second stage decoding is invoked, in which the ordered reliability bits guessing random additive noise decoding (ORBGRAND) algorithm is applied. The accumulated log-likelihood ratios in the first stage are used to order the test error patterns in the ORBGRAND algorithm. Simulation results indicate that the proposed BP-ORBGRAND scheme can outperform the traditional BP iterative algorithm with relatively low additional complexity. Compared with the decoding scheme that concatenates the BP algorithm and the order statistics decoding (OSD) algorithm, the proposed decoding scheme has similar performance and the operations involved can be efficiently implemented in the hardware platform. All these indicate that the proposed scheme is desirable for practical purposes.

IEEE Access•Jan 1, 2026•0 citations

Reduced complexity and improved performance decoding algorithm for nonbinary LDPC codes over GF(q)

Xin Chen, Aidong Men

Low-density parity-check (LDPC) codes over finite fields GF(q) have a better performance than those of the binary low-density parity-check codes, at short and medium block lengths, but the decoder of GF(q)-LDPC has more complexity. In this paper, we present a new reduced-complexity belief propagation (BP) decoding algorithm for GF(q)-LDPC codes by analyzing the reliability of code symbols. Instead of update all the variable nodes during iteration, we just update variable nodes which are mostly to be in an error. The algorithm also shows a property to reduce the effects of oscillating on decoding. The simulations prove that we could improve performance and reduce complexity at the same time for short and medium GF(q)-LDPC codes.

IEEE International Conference on Communication Technology (ICCT)•Nov 1, 2008•6 citations

A two-stage decoding algorithm for short nonbinary LDPC codes with Near-ML performance

Dixia Deng, Hengzhou Xu, Baoming Bai +1 more

This paper proposes a two-stage decoding algorithm (called BP-LED) for short nonbinary low-density parity-check (LDPC) codes. It consists of the classical belief propagation (BP) decoder and a list erasure decoder (LED). Simulation results show that, for the (16, 8) LDPC code over GF(256) in the CCSDS standard, our proposed BP-LED algorithm can achieve a coding gain of 0.6 dB with respect to the FFT-QSPA. By choosing the parameters suitable for the proposed algorithm, it has a negligible performance loss with lower decoding complexity compared with the BP-MRB (most reliable basis) algorithm in [10].

IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2017•3 citations

A hybrid belief propagation decoding algorithms of LDPC codes for fast convergence

Tso-Cho Chen, Chia‐Jung Li, Erl‐Huei Lu

A hybrid belief propagation (BP) decoding algorithm for low-density parity-check code is proposed to accelerate the convergence of decoding and reduce the number of decoding iterations. The hybrid scheme is presented by integrating the BP algorithm with the bit-flipping function which is used as adaptive weighted factor in the BP iteration decoding. The adaptive weighting factor is based on the average weighted reliability measure of the hard output of decoder. The proposed hybrid adaptive weighted iteration scheme can efficiently increase the convergence speed of the belief propagation decoding and therefore improve the error performance. Simulation results show that the proposed algorithm can significantly reduce the decoding complexity and achieve better error performances as compared with the sum-product algorithm.

Cross Strait Radio Science and Wireless Technology Conference (CSRSWTC)•Jul 1, 2013•5 citations
In this paper, an iterative soft-decision hybrid decoding algorithm for non-binary low-density parity-check (LDPC) codes with short codeword lengths is proposed. The rationale of the approach is to combine the classical belief propagation (BP) iterative LDPC decoding algorithm with the most reliable basis (MRB) decoding algorithm. This allows to achieve significant performance improvements, with a complexity that, for medium/low error rates, is only slightly higher than that of the BP algorithm alone. The performance improvement with respect to pure BP decoding is up to 0.7 dB at codeword error rate (CER) ≈ 10-5. Notably, for a fixed MRB order, hybrid decoding achieves a gain up to 0.5 dB at CER ≈ 10-5with respect to BP decoding and MRB decoding used alone.
In this paper, reliability based decoding is combined with belief propagation (BP) decoding for low-density parity check (LDPC) codes. At each iteration, the soft output values delivered by the BP algorithm are used as reliability values to perform reduced complexity soft decision decoding of the code considered. This approach allows to bridge the error performance gap between belief propagation decoding which remains suboptimum, and maximum likelihood decoding which is too complex to be implemented for the codes considered. Trade-offs between decoding complexity and error performance are also investigated. In particular, a stopping criterion which reduces the average number of iterations at the expense of very little performance degradation is proposed for this combined decoding approach. Simulation results for several Gallager (1963, 1968) LDPC codes and different set cyclic codes of hundreds of information bits are given and elaborated.
In this work, reliability based decoding is combined with belief propagation (BP) decoding for low-density parity check (LDPC) codes. At each iteration, the soft output values delivered by the BP algorithm are used as reliability values to perform reduced complexity soft decision decoding of the code considered. This approach allows to bridge the error performance gap between BP decoding which remains suboptimum, and maximum likelihood decoding (MLD) which is too complex to be implemented for the codes considered. A stopping criterion which reduces the average number of iterations at the expense of very little performance degradation is also proposed for this combined decoding approach. Simulations results for several Gallager LDPC codes and different set cyclic (DSC) codes of hundreds of information bits are given and elaborated.
Low-density parity-check (LDPC) codes have been widely used in practice due to their excellent error correction capabilities. However, the error correction performance of traditional decoding algorithms for LDPC codes is limited under short block lengths. To address this problem, this paper proposes an effective scheme that contains two stages for decoding short LDPC codes. In the first stage, the traditional belief propagation (BP) iterative algorithm is used to decode an LDPC code. The decoding process terminates if a codeword is obtained in this stage. Otherwise, the second stage decoding is invoked, in which the ordered reliability bits guessing random additive noise decoding (ORBGRAND) algorithm is applied. The accumulated log-likelihood ratios in the first stage are used to order the test error patterns in the ORBGRAND algorithm. Simulation results indicate that the proposed BP-ORBGRAND scheme can outperform the traditional BP iterative algorithm with relatively low additional complexity. Compared with the decoding scheme that concatenates the BP algorithm and the order statistics decoding (OSD) algorithm, the proposed decoding scheme has similar performance and the operations involved can be efficiently implemented in the hardware platform. All these indicate that the proposed scheme is desirable for practical purposes.
Low-density parity-check (LDPC) codes over finite fields GF(q) have a better performance than those of the binary low-density parity-check codes, at short and medium block lengths, but the decoder of GF(q)-LDPC has more complexity. In this paper, we present a new reduced-complexity belief propagation (BP) decoding algorithm for GF(q)-LDPC codes by analyzing the reliability of code symbols. Instead of update all the variable nodes during iteration, we just update variable nodes which are mostly to be in an error. The algorithm also shows a property to reduce the effects of oscillating on decoding. The simulations prove that we could improve performance and reduce complexity at the same time for short and medium GF(q)-LDPC codes.
This paper proposes a two-stage decoding algorithm (called BP-LED) for short nonbinary low-density parity-check (LDPC) codes. It consists of the classical belief propagation (BP) decoder and a list erasure decoder (LED). Simulation results show that, for the (16, 8) LDPC code over GF(256) in the CCSDS standard, our proposed BP-LED algorithm can achieve a coding gain of 0.6 dB with respect to the FFT-QSPA. By choosing the parameters suitable for the proposed algorithm, it has a negligible performance loss with lower decoding complexity compared with the BP-MRB (most reliable basis) algorithm in [10].
A hybrid belief propagation (BP) decoding algorithm for low-density parity-check code is proposed to accelerate the convergence of decoding and reduce the number of decoding iterations. The hybrid scheme is presented by integrating the BP algorithm with the bit-flipping function which is used as adaptive weighted factor in the BP iteration decoding. The adaptive weighting factor is based on the average weighted reliability measure of the hard output of decoder. The proposed hybrid adaptive weighted iteration scheme can efficiently increase the convergence speed of the belief propagation decoding and therefore improve the error performance. Simulation results show that the proposed algorithm can significantly reduce the decoding complexity and achieve better error performances as compared with the sum-product algorithm.