Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Picosecond pump-probe absorption spectroscopy in gases: models and experimental validation

Thomas B. Settersten, Mark Linne

Published May 20, 2002• 3 citations
Publisher

Abstract

Picosecond pump-probe absorption spectroscopy is a spatially resolved technique that is capable of measuring species concentrations in an absolute sense without the need for calibrations. When laser pulses are used that are shorter than the collision time in a sample, this pump-probe technique exhibits reduced sensitivity to collisional effects such as electronic quenching. We describe modeling and experimental characterization of this technique. The model is developed from rate equations that describe the interactions of the pump and probe pulses with the sample. Calculations based on the density-matrix equations are used to identify limits of applicability for the model. Excellent agreement between the model and the experimental data is observed when both 1.3- and 65-ps pulses are used to detect potassium in a flame and in an atomic vapor cell.

DOI
10.1364/ao.41.002869

Related papers

Picosecond optical limiting in reverse saturable absorbers: a theoretical and experimental study

Richard S. Lepkowicz, Andrey E. Kobyakov, David J. Hagan +1 more

We theoretically and experimentally study absorption of picosecond laser pulses in materials described by a four-level system that exhibit reverse saturable absorption (RSA). Using an approximate solution to the rate equations, we derive, analyze, and verify, numerically and experimentally, a single dynamical equation for the spatial evolution of the pulse fluence that includes both the rate equations and the propagation equation. This analytical approach considerably simplifies the study of optical limiting with picosecond pulses and helps to predict the behavior of the nonlinear transmittance, the level of output signal clamping, and a possible turnover from RSA to saturable absorption that restricts the performance of optical limiters based on RSA. The results obtained can also be used to characterize RSA materials by the pump–probe technique.

Journal of the Optical Society of America B•Jan 1, 2002•37 citations

Polarization spectroscopy using short-pulse lasers: Theoretical analysis

Sukesh Roy T, Robert P. Lucht, Thomas A. Reichardt

The physics of short-pulse polarization spectroscopy (PS) and the diagnostic potential for quantitative measurements of species concentration are investigated by direct numerical integration (DNI) of the time-dependent density matrix equations for a multistate system. The effects of laser power, collision rates, and Doppler broadening on the short-pulse PS signal generation process are investigated by systematically varying these parameters in the numerical calculations. It is found that the use of a short-pulse laser (laser pulse width τL<characteristic collision time τC) significantly decreases the collision-rate dependence of the PS signal compared to the long-pulse laser case (τL>τC), even for a nonsaturating pump beam. For a saturating pump beam, the short-pulse PS signal is found to be nearly independent of collision rate. Increasing the collision rate by a factor of 100 (from 108 to 1010 s−1), the calculated PS signal strength decreases by only a factor of 2 for a 100-ps pump laser at high intensity. This insensitivity of the PS signal to the collision rate in the medium enhances greatly the potential for quantitative application of the technique for concentration measurements in reacting flows. The underlying physics of the short-pulse PS is explored by studying the effects of collision rate, Doppler broadening, and the pump laser intensity on the temporal profile of the Zeeman state populations and the coherences between the Zeeman states.

The Journal of Chemical Physics•Jan 8, 2002•21 citations

Femtosecond pump-probe studies of atomic hydrogen superfluorescence in flames

Kai Wang, Yejun Wang, Jizhou Wang +4 more

We investigate the excited-state dynamics of hydrogen (H) atoms in flames by using a femtosecond (fs) pump-probe scheme and measuring directional emission signals. An approximately 100-fs pump pulse at 205.1 nm excites H atoms through a two-photon process (n = 3 ←← n = 1), which is followed by detection of the forward emission signals induced by a broadband fs probe pulse near 656 nm. Above a certain threshold, we observe a quadratic dependence of the emission signal on the pump laser energy. Moreover, the linewidth of the forward emission signal varies with the probe delay and the probe laser energy. This behavior can be explained in terms of superradiance. We perform a theoretical analysis and compare the experimental results with the theory, and conclude that, within the conditions of our experiment, the behavior of the atomic system involves atomic coherence, which is produced non-adiabatically and corresponds to a superradiant process. Variations in the duration of the gain time window and lifetime of the excited-state H atoms in flames are explored at different flame conditions (i.e., equivalence ratio and heights above the burner). The fs pump-probe technique demonstrated here can also be extended to characterize the time-resolved population dynamics and the corresponding collisional energy transfer rates for energy levels involved in laser-induced fluorescence detection of H atoms in flames relevant to practical combustion applications.

Applied Physics Letters•May 18, 2020•6 citations

Pump-probe interferometry of picosecond superradiance under direct resonant excitation

Kyungwon An, James Robert Harries, Susumu Kuma

Observation of pulsed superradiance from two-level systems under direct excitation is challenging because the much stronger excitation pulse overlaps with the emitted radiation in time, space, and spectrum. Previous demonstrations have therefore mostly relied on excitation via auxiliary levels or multiphoton excitation at different wavelengths, limiting applicability. Here we present an interferometric pump-probe technique that enables observation of picosecond superradiance from a moderately-dense-but-optically-thin ensemble of two-level atoms resonantly excited under substantial Doppler and collisional broadening. Sequential pump and probe pulses tuned to the 555.6-nm E1 transition of 174 Yb allowed us to reconstruct the temporal waveform of the superradiant field from time-averaged transverse fluorescence. The fluorescence displayed interference fringes as a function of the pump-probe delay, whose envelope corresponds to the superradiant polarization P ( t ); taking its time derivative yields the radiated electric field. Pulse widths extracted from the reconstructed field follow a power-law scaling of \(1/{N}_{0}^{0.44}\) , where N 0 is the number of atoms in the interaction volume. The measured temporal dynamics and scaling behavior are in good agreement with simulations based on the coupled Maxwell-Schrödinger equations. This technique provides direct access to ultrafast superradiant dynamics without requiring auxiliary transitions, multiphoton excitation, or ultrafast detectors.

Communications Physics•Oct 6, 2026•0 citations

Phase-modulation laser spectroscopy

Axel Schenzle, Ralph G. DeVoe, Richard G. Brewer

A novel phase-modulation technique which permits subkilohertz-laser stability and new levels of precision in laser spectroscopy was reported recently. For spectroscopy, the basic arrangement consists of a combination of an optical pump and a probe field which is phase modulated. The pump prepares the atomic sample by burning a narrow hole within the atom's inhomogeneous line shape, and the probe beam samples the prepared hole when its modulation sidebands are swept into resonance. Off resonance, the probe is balanced as pairs of sidebands produce heterodyne beat signals of opposite phase which just cancel. On resonance, the balance is upset and yields a nonvanishing beat signal with a Lorentzian absorption or dispersion line shape and with residual noise approaching the shot noise limit. Here we investigate the theory of phase-modulation spectroscopy. We treat the nonlinear response of an atomic two-level quantum system subject to an intense pump and a weak copropagating or counterpropagating phase-modulated probe beam. The density-matrix equations of motion are solved by a Laplace-transform method and by the novel use of a translation operator which allows the infinite hierarchy of coupled equations to close. A solution equivalent to the rate-equation result is developed and coherence corrections are found which predict new resonances that have just been detected in this laboratory. The delayed pump-probe technique encountered in solid-state laser spectroscopy is analyzed in this context for two- and three-level quantum systems. The response of a Fabry-Perot cavity to a phase-modulated light wave is examined also and reveals an unexpected absorption feature.

Physical Review A•May 1, 1982•88 citations

Single-Photon-Level Sub-Doppler Pump-Probe Spectroscopy of Rubidium

Paul Burdekin, Samuele Grandi, Rielly Newbold +3 more

We propose and demonstrate pump-probe spectroscopy of rubidium absorption that reveals the sub-Doppler hyperfine structure of the ${}^{5}{\mathrm{S}}_{1/2}\ensuremath{\leftrightarrow}{}^{5}{\mathrm{P}}_{3/2}$ (${\mathrm{D}}_{2}$) transitions. The counterpropagating pump and probe lasers are independently tunable in frequency, with the probe operating at the single-photon level. The two-dimensional spectrum measured as the laser frequencies are scanned shows fluorescence, Doppler-broadened absorption dips, and sub-Doppler features. The detuning between the pump and probe lasers allows compensation of the Doppler shift for all atomic velocities in the room-temperature vapor, meaning we observe sub-Doppler features for all atoms in the beam. We detail a theoretical model of the system that incorporates fluorescence, saturation effects, and optical pumping and compare this with the measured spectrum, finding a mean absolute percentage error of 3.11%. This high level of agreement allows us to extract the number density and temperature of the $\mathrm{Rb}$ vapor from the two-dimensional spectrum. In the future this technique could be used as an atomic frequency standard for calibrating and characterising a single-photon or low-light-level source.

arXiv:2007.08452•Physical Review Applied•Oct 23, 2020•10 citations
Picosecond pump-probe absorption spectroscopy is a spatially resolved technique that is capable of measuring species concentrations in an absolute sense without the need for calibrations. When laser pulses are used that are shorter than the collision time in a sample, this pump-probe technique exhibits reduced sensitivity to collisional effects such as electronic quenching. We describe modeling and experimental characterization of this technique. The model is developed from rate equations that describe the interactions of the pump and probe pulses with the sample. Calculations based on the density-matrix equations are used to identify limits of applicability for the model. Excellent agreement between the model and the experimental data is observed when both 1.3- and 65-ps pulses are used to detect potassium in a flame and in an atomic vapor cell.
We theoretically and experimentally study absorption of picosecond laser pulses in materials described by a four-level system that exhibit reverse saturable absorption (RSA). Using an approximate solution to the rate equations, we derive, analyze, and verify, numerically and experimentally, a single dynamical equation for the spatial evolution of the pulse fluence that includes both the rate equations and the propagation equation. This analytical approach considerably simplifies the study of optical limiting with picosecond pulses and helps to predict the behavior of the nonlinear transmittance, the level of output signal clamping, and a possible turnover from RSA to saturable absorption that restricts the performance of optical limiters based on RSA. The results obtained can also be used to characterize RSA materials by the pump–probe technique.
The physics of short-pulse polarization spectroscopy (PS) and the diagnostic potential for quantitative measurements of species concentration are investigated by direct numerical integration (DNI) of the time-dependent density matrix equations for a multistate system. The effects of laser power, collision rates, and Doppler broadening on the short-pulse PS signal generation process are investigated by systematically varying these parameters in the numerical calculations. It is found that the use of a short-pulse laser (laser pulse width τL<characteristic collision time τC) significantly decreases the collision-rate dependence of the PS signal compared to the long-pulse laser case (τL>τC), even for a nonsaturating pump beam. For a saturating pump beam, the short-pulse PS signal is found to be nearly independent of collision rate. Increasing the collision rate by a factor of 100 (from 108 to 1010 s−1), the calculated PS signal strength decreases by only a factor of 2 for a 100-ps pump laser at high intensity. This insensitivity of the PS signal to the collision rate in the medium enhances greatly the potential for quantitative application of the technique for concentration measurements in reacting flows. The underlying physics of the short-pulse PS is explored by studying the effects of collision rate, Doppler broadening, and the pump laser intensity on the temporal profile of the Zeeman state populations and the coherences between the Zeeman states.
We investigate the excited-state dynamics of hydrogen (H) atoms in flames by using a femtosecond (fs) pump-probe scheme and measuring directional emission signals. An approximately 100-fs pump pulse at 205.1 nm excites H atoms through a two-photon process (n = 3 ←← n = 1), which is followed by detection of the forward emission signals induced by a broadband fs probe pulse near 656 nm. Above a certain threshold, we observe a quadratic dependence of the emission signal on the pump laser energy. Moreover, the linewidth of the forward emission signal varies with the probe delay and the probe laser energy. This behavior can be explained in terms of superradiance. We perform a theoretical analysis and compare the experimental results with the theory, and conclude that, within the conditions of our experiment, the behavior of the atomic system involves atomic coherence, which is produced non-adiabatically and corresponds to a superradiant process. Variations in the duration of the gain time window and lifetime of the excited-state H atoms in flames are explored at different flame conditions (i.e., equivalence ratio and heights above the burner). The fs pump-probe technique demonstrated here can also be extended to characterize the time-resolved population dynamics and the corresponding collisional energy transfer rates for energy levels involved in laser-induced fluorescence detection of H atoms in flames relevant to practical combustion applications.
Observation of pulsed superradiance from two-level systems under direct excitation is challenging because the much stronger excitation pulse overlaps with the emitted radiation in time, space, and spectrum. Previous demonstrations have therefore mostly relied on excitation via auxiliary levels or multiphoton excitation at different wavelengths, limiting applicability. Here we present an interferometric pump-probe technique that enables observation of picosecond superradiance from a moderately-dense-but-optically-thin ensemble of two-level atoms resonantly excited under substantial Doppler and collisional broadening. Sequential pump and probe pulses tuned to the 555.6-nm E1 transition of 174 Yb allowed us to reconstruct the temporal waveform of the superradiant field from time-averaged transverse fluorescence. The fluorescence displayed interference fringes as a function of the pump-probe delay, whose envelope corresponds to the superradiant polarization P ( t ); taking its time derivative yields the radiated electric field. Pulse widths extracted from the reconstructed field follow a power-law scaling of 1/N00.441/{N}_{0}^{0.44}1/N00.44​ , where N 0 is the number of atoms in the interaction volume. The measured temporal dynamics and scaling behavior are in good agreement with simulations based on the coupled Maxwell-Schrödinger equations. This technique provides direct access to ultrafast superradiant dynamics without requiring auxiliary transitions, multiphoton excitation, or ultrafast detectors.
A novel phase-modulation technique which permits subkilohertz-laser stability and new levels of precision in laser spectroscopy was reported recently. For spectroscopy, the basic arrangement consists of a combination of an optical pump and a probe field which is phase modulated. The pump prepares the atomic sample by burning a narrow hole within the atom's inhomogeneous line shape, and the probe beam samples the prepared hole when its modulation sidebands are swept into resonance. Off resonance, the probe is balanced as pairs of sidebands produce heterodyne beat signals of opposite phase which just cancel. On resonance, the balance is upset and yields a nonvanishing beat signal with a Lorentzian absorption or dispersion line shape and with residual noise approaching the shot noise limit. Here we investigate the theory of phase-modulation spectroscopy. We treat the nonlinear response of an atomic two-level quantum system subject to an intense pump and a weak copropagating or counterpropagating phase-modulated probe beam. The density-matrix equations of motion are solved by a Laplace-transform method and by the novel use of a translation operator which allows the infinite hierarchy of coupled equations to close. A solution equivalent to the rate-equation result is developed and coherence corrections are found which predict new resonances that have just been detected in this laboratory. The delayed pump-probe technique encountered in solid-state laser spectroscopy is analyzed in this context for two- and three-level quantum systems. The response of a Fabry-Perot cavity to a phase-modulated light wave is examined also and reveals an unexpected absorption feature.
We propose and demonstrate pump-probe spectroscopy of rubidium absorption that reveals the sub-Doppler hyperfine structure of the ${}^{5}{\mathrm{S}}_{1/2}\ensuremath{\leftrightarrow}{}^{5}{\mathrm{P}}_{3/2}$ (D2{\mathrm{D}}_{2}D2​) transitions. The counterpropagating pump and probe lasers are independently tunable in frequency, with the probe operating at the single-photon level. The two-dimensional spectrum measured as the laser frequencies are scanned shows fluorescence, Doppler-broadened absorption dips, and sub-Doppler features. The detuning between the pump and probe lasers allows compensation of the Doppler shift for all atomic velocities in the room-temperature vapor, meaning we observe sub-Doppler features for all atoms in the beam. We detail a theoretical model of the system that incorporates fluorescence, saturation effects, and optical pumping and compare this with the measured spectrum, finding a mean absolute percentage error of 3.11%. This high level of agreement allows us to extract the number density and temperature of the Rb\mathrm{Rb}Rb vapor from the two-dimensional spectrum. In the future this technique could be used as an atomic frequency standard for calibrating and characterising a single-photon or low-light-level source.