A fundamental difficulty in demonstrating quantum state tomography is that the required resources grow exponentially with the system size. For pure states and nearly pure states, the task of tomography can be more efficient. We proposed two methods for state reconstruction, by (1) minimizing entropy and (2) maximizing likelihood. The algorithm of compressed sampling is employed to solve the optimization problem. Experiments are demonstrated considering 4-qubit photonic states. The results show that (1) much fewer measurements than the standard tomography are sufficient to obtain high fidelity, and (2) the method of maximizing likelihood is more accurate and noise robust than the original reconstruction method of compressed sampling. Furthermore, the physical meaning of the methods of minimizing entropy and maximizing likelihood is clear.
A fundamental difficulty in demonstrating quantum state tomography is that the required resources grow exponentially with the system size. For pure states and nearly pure states, the task of tomography can be more efficient. We proposed two methods for state reconstruction, by (1) minimizing entropy and (2) maximizing likelihood. The algorithm of compressed sampling is employed to solve the optimization problem. Experiments are demonstrated considering 4-qubit photonic states. The results show that (1) much fewer measurements than the standard tomography are sufficient to obtain high fidelity, and (2) the method of maximizing likelihood is more accurate and noise robust than the original reconstruction method of compressed sampling. Furthermore, the physical meaning of the methods of minimizing entropy and maximizing likelihood is clear.
Intuitively, if a density operator has small rank, then it should be easier to estimate from experimental data, since in this case only a few eigenvectors need to be learned. We prove two complementary results that confirm this intuition. Firstly, we show that a low-rank density matrix can be estimated using fewer copies of the state, i.e. the sample complexity of tomography decreases with the rank. Secondly, we show that unknown low-rank states can be reconstructed from an incomplete set of measurements, using techniques from compressed sensing and matrix completion. These techniques use simple Pauli measurements, and their output can be certified without making any assumptions about the unknown state. In this paper, we present a new theoretical analysis of compressed tomography, based on the restricted isometry property for low-rank matrices. Using these tools, we obtain near-optimal error bounds for the realistic situation where the data contain noise due to finite statistics, and the density matrix is full-rank with decaying eigenvalues. We also obtain upper bounds on the sample complexity of compressed tomography, and almost-matching lower bounds on the sample complexity of any procedure using adaptive sequences of Pauli measurements. Using numerical simulations, we compare the performance of two compressed sensing estimators—the matrix Dantzig selector and the matrix Lasso—with standard maximum-likelihood estimation (MLE). We find that, given comparable experimental resources, the compressed sensing estimators consistently produce higher fidelity state reconstructions than MLE. In addition, the use of an incomplete set of measurements leads to faster classical processing with no loss of accuracy. Finally, we show how to certify the accuracy of a low-rank estimate using direct fidelity estimation, and describe a method for compressed quantum process tomography that works for processes with small Kraus rank and requires only Pauli eigenstate preparations and Pauli measurements.
Quantum state tomography (QST) is a crucial technique for characterizing the state of quantum systems. However, traditional QST requires a large number of measurements, leading to significant experimental overhead in terms of time, resources, and data acquisition. This work proposes a novel approach to QST by leveraging compressed sensing (CS) techniques. CS allows for accurate reconstruction of the quantum state from a significantly reduced set of measurements, thereby mitigating the experimental burden. We employ sparsity regularization, a key component of CS, to minimize the number of measurements needed. The theoretical framework and the underlying principles are presented, focusing on the mathematical formulation of the problem and the optimization strategies involved. This method offers a pathway to more efficient and cost-effective QST, particularly for complex quantum states or when limited experimental resources are available. We demonstrate the potential of this approach through a detailed mathematical analysis.
Quantum state tomography (QST) is an executable procedure, allowing complete reconstruction of a quantum state. As a basic tool, QST is widely employed in quantum information research. However, many projective measurements on identical copies of the quantum state under test are required in standard QST, which is heavily time-consumed. Here, we perform reconstruction of density matrix with dimensionality of 15×15 by utilizing compressed sensing method at a sampling ratio of 0.35. According to the experimental results, the fidelity could be as high as 93.0%~99.4% and 73.8% for coherent laser beams and heralded single photon sources, respectively.
Given an experimental setup and a fixed number of measurements, how should one take data to optimally reconstruct the state of a quantum system? The problem of optimal experiment design (OED) for quantum state tomography was first broached by Kosut et al. [R. Kosut, I. Walmsley, and H. Rabitz, e-print arXiv:quant-ph/0411093 (2004)]. Here we provide efficient numerical algorithms for finding the optimal design, and analytic results for the case of `minimal tomography'. We also introduce the average OED, which is independent of the state to be reconstructed, and the optimal design for tomography (ODT), which minimizes tomographic bias. Monte Carlo simulations confirm the utility of our results for qubits. Finally, we adapt our approach to deal with constrained techniques such as maximum-likelihood estimation. We find that these are less amenable to optimization than cruder reconstruction methods, such as linear inversion.
Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of O(d2), significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.
The principle of maximum likelihood reconstruction has proven to yield satisfactory results in the context of quantum state tomography for many-body systems of moderate system sizes. Until recently, however, quantum state tomography has been considered to be infeasible for systems consisting of a large number of subsystems due to the exponential growth of the Hilbert space dimension with the number of constituents. Several reconstruction schemes have been proposed since then to overcome the two main obstacles in quantum many-body tomography: experiment time and post-processing resources. Here we discuss one strategy to address these limitations for the maximum likelihood principle by adopting a particular state representation to merge a well established reconstruction algorithm maximizing the likelihood with techniques known from quantum many-body theory.