Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Journal of Quantum Electronics

Criteria for optical bistability in a lossy saturating Fabry-Perot

E. Garmire

Published Mar 1, 1989• 81 citations
Publisher

Abstract

Large optical nonlinearities occur in a variety of multiple quantum-well and n-i-p-i materials in which the nonlinearity saturates and there is residual absorption. The conditions for bistability when such media are placed with a Fabry-Perot etalon are discussed. It is proved analytically that the ratio of the optically induced saturated index change to the linear loss per unit length must be larger than the wavelength divided by pi . It is shown, however, that practical devices require twice this value. It is found that there is a tradeoff in cavity design between minimizing the switching intensity and minimizing the required nonlinear phase change. Finally, approximate expressions for the switching intensity versus detuning are given.>

DOI
10.1109/3.18542

Related papers

Optical Bistability in a Nonlinear Resonator With Saturable Losses and Intensity-Dependent Refractive Index

S Bhargava, P. K. Datta, Antonella Bogoni +3 more

We present numerical results relative to a bistable optical device comprised of an asymmetric Fabry-Perot cavity embedding a nonlinear optical medium. Both the real and imaginary part of the third order nonlinear susceptibility are considered in our calculations. Optimized device operation, expressed in terms of the contrast ratio between the two stable states, is then discussed as a function of the different cavity parameters. The presented method can be a useful tool for designing practical devices with application in the field of all-optical switching, optical regeneration and optical signal processing.

•Jan 1, 2009•0 citations

Optical Bistability in a Nonlinear Resonator with Saturable Losses and Intensity-Dependent Refractive Index

S Bhargava, Claudio Porzi, Prasanta Kumar Datta +3 more

We present numerical results relative to a bistable optical device comprised of an asymmetric Fabry-Perot cavity embedding a nonlinear optical medium. Both the real and imaginary part of the third order nonlinear susceptibility are considered in our calculations. Optimized device operation, expressed in terms of the contrast ratio between the two stable states, is then discussed as a function of the different cavity parameters. The presented method can be a useful tool for designing practical devices with application in the field of all-optical switching, optical regeneration and optical signal processing.

International Conference on Communications•May 1, 2010•7 citations

Absorptive optical bistability in organic media under the influence of transverse effects

Eliška Jurisová, Jarmila Müllerová

The influence of transverse effects on optical bistability in Fabry-Perot cavity filled with saturable absorber was numerically investigated. A simple model of singlet absorption was used on numerically solving the relationships between the input and output light fields. The proposed model corresponds well to organic compounds considered as novel optical materials with third-order optical nonlinearities. The proposed optically bistable systems were demonstrated for two organic dyes of fluorescein and rhodamine 6G dispersed in transparent solid matrices. Their optically bistable behaviour was anticipated considering the homogeneous and Gaussian distribution of light energy in the radial direction. Most notable cases are discussed related to the changes of the Gaussian beam radii, positive feedback conditions in the Fabry-Perot cavity and considering linear and nonlinear absorption parameters of the organic media. The simulation results enabled us to establish numerically thresholds of Fabry-Perot mirror reflectance and Gaussian beam radius for both nonlinear organic materials, above which absorptive optical bistability can occur. The results can be helpful in design of optical switches for all-optical communication networks.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 24, 2010•1 citation

Optical bistability in an all-optical fiber nonlinear fabry-perot resonator with linear absorption

Shenping Li, K.T. Chan

An all-optical fiber nonlinear Fabry-Perot resonator is proposed. The steady-state model for describing this resonator is developed. The transmission and refection bistabilities are shown numerically. Our results show that the bistability in this system is similar to that in a normal nonlinear Fabry-Perot etalon, except that the characteristics of the bistability can be changed not only by the cavity length but also by the phase shifts of the fiber loop mirrors.

Fiber & Integrated Optics•Jan 1, 1997•3 citations

Transverse effects in switching of bistable Fabry–Perot etalons filled with a saturable medium

Ulf Olin, Olof Sahlén

A systematic variation of the Fresnel number has been performed when solving the nonlinear wave equation for a Fabry–Perot étalon filled with a saturable medium and including unsaturable background absorption. We show that the optimum Fresnel number for absorptive and defocusing bistability in media such as CdS, using the nonlinearity due to the bound exciton resonance, can be considerably greater than one and that bistability is completely lost for tight focusing.

Journal of the Optical Society of America B•Mar 1, 1987•18 citations

The Role Of Focusing For A Bistable Fabry-Perot Etalon With A Local Saturable Nonlinearity

Ulf Andersson, Olof Sahlén

The non-linear wave-equation has been solved numerically for a Fabry-Perot etalon, assuming a cylindrical symmetric gaussian input beam, a local mixed dispersive and absorptive saturable nonlinearity and an additional nonsaturable background absorption term. The role of focusing has been systematically investigated for both absorptive and dispersive bistability. Whole-beam switching occurs under tight focusing conditions. But, in the case of defocusing and absorptive bistability, a further reduction of spotsize results in loss of the hysteresis characteristics. Thus, thisposes a restriction on the minimum spotsize and, hence on the minimum input power, for bistable operation.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 8, 1987•0 citations
Large optical nonlinearities occur in a variety of multiple quantum-well and n-i-p-i materials in which the nonlinearity saturates and there is residual absorption. The conditions for bistability when such media are placed with a Fabry-Perot etalon are discussed. It is proved analytically that the ratio of the optically induced saturated index change to the linear loss per unit length must be larger than the wavelength divided by pi . It is shown, however, that practical devices require twice this value. It is found that there is a tradeoff in cavity design between minimizing the switching intensity and minimizing the required nonlinear phase change. Finally, approximate expressions for the switching intensity versus detuning are given.>
We present numerical results relative to a bistable optical device comprised of an asymmetric Fabry-Perot cavity embedding a nonlinear optical medium. Both the real and imaginary part of the third order nonlinear susceptibility are considered in our calculations. Optimized device operation, expressed in terms of the contrast ratio between the two stable states, is then discussed as a function of the different cavity parameters. The presented method can be a useful tool for designing practical devices with application in the field of all-optical switching, optical regeneration and optical signal processing.
We present numerical results relative to a bistable optical device comprised of an asymmetric Fabry-Perot cavity embedding a nonlinear optical medium. Both the real and imaginary part of the third order nonlinear susceptibility are considered in our calculations. Optimized device operation, expressed in terms of the contrast ratio between the two stable states, is then discussed as a function of the different cavity parameters. The presented method can be a useful tool for designing practical devices with application in the field of all-optical switching, optical regeneration and optical signal processing.
The influence of transverse effects on optical bistability in Fabry-Perot cavity filled with saturable absorber was numerically investigated. A simple model of singlet absorption was used on numerically solving the relationships between the input and output light fields. The proposed model corresponds well to organic compounds considered as novel optical materials with third-order optical nonlinearities. The proposed optically bistable systems were demonstrated for two organic dyes of fluorescein and rhodamine 6G dispersed in transparent solid matrices. Their optically bistable behaviour was anticipated considering the homogeneous and Gaussian distribution of light energy in the radial direction. Most notable cases are discussed related to the changes of the Gaussian beam radii, positive feedback conditions in the Fabry-Perot cavity and considering linear and nonlinear absorption parameters of the organic media. The simulation results enabled us to establish numerically thresholds of Fabry-Perot mirror reflectance and Gaussian beam radius for both nonlinear organic materials, above which absorptive optical bistability can occur. The results can be helpful in design of optical switches for all-optical communication networks.
The non-linear wave-equation has been solved numerically for a Fabry-Perot etalon, assuming a cylindrical symmetric gaussian input beam, a local mixed dispersive and absorptive saturable nonlinearity and an additional nonsaturable background absorption term. The role of focusing has been systematically investigated for both absorptive and dispersive bistability. Whole-beam switching occurs under tight focusing conditions. But, in the case of defocusing and absorptive bistability, a further reduction of spotsize results in loss of the hysteresis characteristics. Thus, thisposes a restriction on the minimum spotsize and, hence on the minimum input power, for bistable operation.