We present an entirely linear all-optical method of dispersion enhancement using coupled cavities that leads to a substantial increase in system transmission in comparison with atom-cavity systems. This is achieved by tuning the system to an anomalous dispersion condition by under-coupling at least one of the cavities to the other. The intracavity anomalous dispersion is then associated with a dip in reflection (and in turn with a peak in transmission) rather than with an absorption resonance as in the case of the atomic vapor. We find that in contrast with the atom-cavity system where mode reshaping always contributes to the mode pushing, in coupled cavity systems reshaping of the mode profile can either contribute to or oppose the mode pushing, and even reverse it under appropriate conditions leading to a reduced scale factor in transmission. We demonstrate a method for further optimizing the transmission of both atom-cavity and coupled-cavity systems, but show that this leads to a more rectangular mode profile and a reduction in the scale factor bandwidth. We also derive the cavity scale factor in reflection for both atom-cavity and coupled cavity systems and show that in reflection the reshaping of the mode profile can either contribute to or oppose the mode pushing, but cannot reverse it.
We present an entirely linear all-optical method of dispersion enhancement using coupled cavities that leads to a substantial increase in system transmission in comparison with atom-cavity systems. This is achieved by tuning the system to an anomalous dispersion condition by under-coupling at least one of the cavities to the other. The intracavity anomalous dispersion is then associated with a dip in reflection (and in turn with a peak in transmission) rather than with an absorption resonance as in the case of the atomic vapor. We find that in contrast with the atom-cavity system where mode reshaping always contributes to the mode pushing, in coupled cavity systems reshaping of the mode profile can either contribute to or oppose the mode pushing, and even reverse it under appropriate conditions leading to a reduced scale factor in transmission. We demonstrate a method for further optimizing the transmission of both atom-cavity and coupled-cavity systems, but show that this leads to a more rectangular mode profile and a reduction in the scale factor bandwidth. We also derive the cavity scale factor in reflection for both atom-cavity and coupled cavity systems and show that in reflection the reshaping of the mode profile can either contribute to or oppose the mode pushing, but cannot reverse it.
We present an entirely linear all-optical method of dispersion enhancement that relies on mode coupling between the orthogonal polarization modes of a single optical cavity, eliminating the necessity of using an atomic medium to produce the required anomalous dispersion, which decreases the dependence of the scale factor on temperature and increases signal-to-noise by reducing absorption and nonlinear effects. The use of a single cavity results in common mode rejection of the noise and drift that would be present in a system of two coupled cavities. We show that the scale-factor-to-mode-width ratio is increased above unity for this system and demonstrate tuning of the scale factor by (i) directly varying the mode coupling via rotation of an intracavity half wave plate, and (ii) coherent control of the cavity reflectance which is achieved simply by varying the incident polarization superposition. These tuning methods allow us to achieve unprecedented enhancements in the scale factor and in the scale-factor-to-mode-width ratio by closely approaching the critical anomalous dispersion condition.
We have measured mode pushing by the dispersion of a rubidium vapor in a Fabry-Perot cavity and have shown that the scale factor and sensitivity of a passive cavity can be strongly enhanced by the presence of such an anomalous dispersion medium. The enhancement is the result of the atom-cavity coupling, which provides a positive feedback to the cavity response. The cavity sensitivity can also be controlled and tuned through a pole by a second, optical pumping, beam applied transverse to the cavity. Alternatively, the sensitivity can be controlled by the introduction of a second counter-propagating input beam that interferes with the first beam, coherently increasing the cavity absorptance. We show that the pole in the sensitivity occurs when the sum of the effective group index and an additional cavity delay factor that accounts for mode reshaping goes to zero, and is an example of an exceptional point, commonly associated with coupled non- Hermitian Hamiltonian systems. Additionally we show that a normal dispersion feature can decrease the cavity scale factor and can be generated through velocity selective optical pumping.
The pushing of the modes of a Fabry-Perot cavity by an intracavity rubidium cell is measured. The scale factor of the modes is increased by the anomalous dispersion and is inversely proportional to the sum of the effective group index and an additional cavity delay factor that arises from the variation of the Rb absorption over a free spectral range. This additional positive feedback further increases the effect of the anomalous dispersion and goes to zero at the lasing threshold. The mode width does not grow as fast as the scale factor as the intracavity absorption is increased resulting in enhanced measurement sensitivities. For absorptions larger than the scale factor pole, the atom-cavity response is multivalued and mode splitting occurs.
We analyze the effect of a highly dispersive element placed inside a modulated optical cavity on the frequency and amplitude of the modulation to determine the conditions for cavity self-stabilization and enhanced gyroscopic sensitivity. Hence, we model cavity rotation or instability by an arbitrary AM/FM modulation, and the dispersive element as a phase and amplitude filter. We find that anomalous dispersion may be used to self-stabilize a laser cavity, provided the magnitude of the group index of refraction is smaller than the phase index of refraction in the cavity. The optimal stabilization is found to occur when the group index is zero. Group indices with magnitudes larger than the phase index (both normal and anomalous dispersion) are found to enhance the sensitivity of a laser gyroscope to rotation. Furthermore, our results indicate that atomic media, even coherent superpositions in multilevel atoms, are not useful for these applications, because the amplitude and phase filters work against one another, i.e., decreasing the modulation frequency increases its amplitude and vice versa, with one exception: negative group indices whose magnitudes are larger than the phase index result in negative, but enhanced, beat frequencies. On the other hand, for optical resonators the dispersion reversal associated with critical coupling enables the amplitude and phase filters to work together under a greater variety of circumstances than for atomic media. We find that for single over-coupled resonators, or in the case of under-coupled coupled-resonator-induced absorption, the absorption and normal dispersion on-resonance increase the contrast and frequency of the beat-note, respectively, resulting in a substantial enhancement of the gyroscopic response. Moreover, for cavity self-stabilization, we propose the use of a variety of coupled-resonator induced transparency that is accompanied by anomalous dispersion.
Linear absorption and dispersion properties, as well as Kerr nonlinear index, of three-level atomic systems can be greatly modified under the condition of electromagnetically induced transparency (EIT). By placing such EIT atoms in a vapor cell inside an optical ring cavity, the cavity transmission spectrum can be altered and controlled. We show that the cavity transmission linewidth can be narrowed substantially comparing to the empty cavity linewidth due to the sharp normal (linear) dispersion associated with the EIT resonance (which can be considered as photons traveling with a slower speed inside the optical cavity). On the other hand, the Kerr nonlinear dispersion has the opposite slope comparing to the linear dispersion near the EIT resonance, which can be used to balance the linear dispersion and lead to total anomalous dispersion for the intracavity atomic medium (with ``superluminal photon speed'' inside the optical cavity). Such anomalous dispersion in the intracavity medium makes the cavity transmission linewidth broader than the empty cavity linewidth. Under certain parameters, the so called ``white-light cavity'' condition can be satisfied, which makes the cavity transmission linewidth very broad and, at the same time, have high cavity transmission. Such modified and controlled cavity transmission linewidths can have many interesting applications in frequency locking, cavity ring-down spectroscopy, nonlinear optical spectroscopy, cavity-QED, and even recycling cavity of the gravitational-wave detector.