Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physica Scripta

Observation of Qubit State with a dc-SQUID and Dissipation Effect in the SQUID

Hideaki Takayanagi, Hirotaka Tanaka, Shiro Saito, Hayato Nakano

Published Jan 1, 2002• 10 citations
Publisher

Abstract

Two states of a flux qubit with three Josephson junctions were shown in a single measurement with a dc-SQUID. The qubit is an aluminum superconductor loop surrounded by a dc-SQUID for readout. It has two states, which have persistent currents flowing in opposite directions. The readout data for three samples with different junction sizes suggest that the probability distribution for the double-well potential depends on the ratio of E J / E C , where E J is the Josephson energy and E C is the charging energy. The probability distribution was estimated by calculating the wavefunctions and energy levels for the measured samples. We measured the retrapping current of a dc-SQUID without the qubit as a function of the magnetic field. It was found that the relative phase relation for the magnetic field dependence of the retrapping current jumped from 0 to π at E J ≈ E C . This jump can be explained phenomenologically by taking into account the two kinds of dissipation arising from ac currents flowing through the lead and along the SQUID loop. The fact that the jump occurred at E J ≈ E C strongly suggests that the quantum nature of the electromagnetic environment needs to be taken into account in order to understand the origin of the dissipation.

DOI
10.1238/physica.topical.102a00095

Related papers

π -phase jump of magnetic-field dependence of retrapping current in dc SQUID’s

Shiro Saito, Hirotaka Tanaka, H. Nakano +2 more

We measured the retrapping current of a small-capacitance underdamped dc superconducting quantum interference device (SQUID) at low temperatures as a function of magnetic field. We found that the relative phase relation between the magnetic-field dependence of the retrapping current and that of the switching current jumped from 0 to $\ensuremath{\pi}$ at ${E}_{\mathrm{J}}\ensuremath{\sim}{E}_{\mathrm{C}},$ where ${E}_{\mathrm{J}}$ and ${E}_{\mathrm{C}}$ are the Josephson energy and the charging energy of a Cooper pair. This phenomenon cannot be reproduced by a model that approximates the SQUID as a single junction with a controllable switching current. It can be explained phenomenologically by taking into account two kinds of dissipation that arise from ac currents flowing through the lead and along the SQUID's loop.

Physical review. B, Condensed matter•Oct 29, 2002•0 citations

Single-Shot Readout of Macroscopic Quantum Superposition State in a Superconducting Flux Qubit

Hirotaka Tanaka, Shiro Saito, Hayato Nakano +3 more

Single-shot readout experiments were performed on the two lowest-energy states of a superconducting qubit with three Josephson junctions embedded in a superconducting loop. We measured the qubit state via switching current Isw of a current-biased dc-SQUID, a quantum detector surrounding the qubit loop. The qubit signals were measured in a small Isw regime of the SQUID, typically less than 100 nA, where the Isw distribution is particularly narrow. The obtained single-shot data indicate that the qubit state is readout, through the flux generated by the qubit persistent-current, as energy eigenstates rather than current eigenstates.

arXiv:cond-mat/0407299•Jul 12, 2004•8 citations

A theoretical analysis of flux-qubit measurements with a dc-SQUID

Nakano, H., Hirotaka Tanaka, Shiro Saito +3 more

The readout process of a superconducting flux-qubit is theoretically analyzed in terms of the quantum dynamics of a qubit-SQUID coupled system during measurement. The quantity directly observed by the measurement is the switching current (Isw) of the dc-SQUID placed around the qubit ring. In order to clarify the relation between the Isw and the qubit state, we calculated the time evolution of the density operator of the qubit-SQUID system while increasing the SQUID bias current until switching events occur and obtained the switching current distributions. This clarifies what information of the qubit is obtained by a dc-SQUID switching current measurement under specific conditions, for example, when the qubit eigenstate is a superposition of two different flux states.

arXiv:cond-mat/0406622•Jun 25, 2004•2 citations

Flux qubit in a dc SQUID with the 4 π period Josephson effect

Wenchao Huang, Qifeng Liang, Dao‐Xin Yao +1 more

We propose a superconducting flux qubit in a dc SQUID structure, formed by a conventional insulator Josephson junction and a topological nanowire Josephson junction with Majorana bound states. The zero-energy Majorana bound states transport 4 π period Josephson currents in the nanowire junction. The interplay between this 4 π period Josephson effect and the convectional 2 π period Josephson effect in the insulator junction induces a double-well potential energy landscape in the SQUID. As a result, the two lowest-energy levels of the SQUID are isolated from the other levels. These two levels show counterpropagating supercurrents, thus can be used as a flux qubit. We reveal that this flux qubit has the merits of stability to external noises, tolerance to the deviation of system parameters, and scalability to large numbers. Furthermore, we demonstrate how to couple this flux qubit with the Majorana qubit by tuning the junction parameters, and how to use this coupling to manipulate the Majorana qubit.

Europhysics Letters (EPL)•May 1, 2015•3 citations

dc SQUID Phase Qubit

Tauno Palomaki

This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.

•Aug 6, 2008•2 citations

Superconducting quantum interference device with frequency-dependent damping: Readout of flux qubits

Timothy L. Robertson, B. L. T. Plourde, T. Hime +4 more

Recent experiments on superconducting flux qubits, consisting of a superconducting loop interrupted by Josephson junctions, have demonstrated quantum coherence between two different quantum states. The state of the qubit is measured with a superconducting quantum interference device (SQUID). Such measurements require the SQUID to have high resolution while exerting minimal backaction on the qubit. By designing shunts across the SQUID junctions appropriately, one can improve the measurement resolution without increasing the backaction significantly. Using a path-integral approach to analyze the Caldeira-Leggett model, we calculate the narrowing of the distribution of the switching events from the zero-voltage state of the SQUID for arbitrary shunt admittances, focusing on shunts consisting of a capacitance ${C}_{s}$ and resistance ${R}_{s}$ in series. To test this model, we fabricated a dc SQUID in which each junction is shunted with a thin-film interdigitated capacitor in series with a resistor, and measured the switching distribution as a function of temperature and applied magnetic flux. After accounting for the damping due to the SQUID leads, we found good agreement between the measured escape rates and the predictions of our model. We analyze the backaction of a shunted symmetric SQUID on a flux qubit. For the given parameters of our SQUID and realistic parameters for a flux qubit, at the degeneracy point we find a relaxation time of $113\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, which limits the decoherence time to $226\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$. Based on our analysis of the escape process, we determine that a SQUID with purely capacitive shunts should have narrow switching distributions and no dissipation.

Physical Review B•Jul 11, 2005•23 citations
Two states of a flux qubit with three Josephson junctions were shown in a single measurement with a dc-SQUID. The qubit is an aluminum superconductor loop surrounded by a dc-SQUID for readout. It has two states, which have persistent currents flowing in opposite directions. The readout data for three samples with different junction sizes suggest that the probability distribution for the double-well potential depends on the ratio of E J / E C , where E J is the Josephson energy and E C is the charging energy. The probability distribution was estimated by calculating the wavefunctions and energy levels for the measured samples. We measured the retrapping current of a dc-SQUID without the qubit as a function of the magnetic field. It was found that the relative phase relation for the magnetic field dependence of the retrapping current jumped from 0 to π at E J ≈ E C . This jump can be explained phenomenologically by taking into account the two kinds of dissipation arising from ac currents flowing through the lead and along the SQUID loop. The fact that the jump occurred at E J ≈ E C strongly suggests that the quantum nature of the electromagnetic environment needs to be taken into account in order to understand the origin of the dissipation.
We measured the retrapping current of a small-capacitance underdamped dc superconducting quantum interference device (SQUID) at low temperatures as a function of magnetic field. We found that the relative phase relation between the magnetic-field dependence of the retrapping current and that of the switching current jumped from 0 to $\ensuremath{\pi}$ at ${E}_{\mathrm{J}}\ensuremath{\sim}{E}_{\mathrm{C}},$ where EJ{E}_{\mathrm{J}}EJ​ and EC{E}_{\mathrm{C}}EC​ are the Josephson energy and the charging energy of a Cooper pair. This phenomenon cannot be reproduced by a model that approximates the SQUID as a single junction with a controllable switching current. It can be explained phenomenologically by taking into account two kinds of dissipation that arise from ac currents flowing through the lead and along the SQUID's loop.
Single-shot readout experiments were performed on the two lowest-energy states of a superconducting qubit with three Josephson junctions embedded in a superconducting loop. We measured the qubit state via switching current Isw of a current-biased dc-SQUID, a quantum detector surrounding the qubit loop. The qubit signals were measured in a small Isw regime of the SQUID, typically less than 100 nA, where the Isw distribution is particularly narrow. The obtained single-shot data indicate that the qubit state is readout, through the flux generated by the qubit persistent-current, as energy eigenstates rather than current eigenstates.
The readout process of a superconducting flux-qubit is theoretically analyzed in terms of the quantum dynamics of a qubit-SQUID coupled system during measurement. The quantity directly observed by the measurement is the switching current (Isw) of the dc-SQUID placed around the qubit ring. In order to clarify the relation between the Isw and the qubit state, we calculated the time evolution of the density operator of the qubit-SQUID system while increasing the SQUID bias current until switching events occur and obtained the switching current distributions. This clarifies what information of the qubit is obtained by a dc-SQUID switching current measurement under specific conditions, for example, when the qubit eigenstate is a superposition of two different flux states.
We propose a superconducting flux qubit in a dc SQUID structure, formed by a conventional insulator Josephson junction and a topological nanowire Josephson junction with Majorana bound states. The zero-energy Majorana bound states transport 4 π period Josephson currents in the nanowire junction. The interplay between this 4 π period Josephson effect and the convectional 2 π period Josephson effect in the insulator junction induces a double-well potential energy landscape in the SQUID. As a result, the two lowest-energy levels of the SQUID are isolated from the other levels. These two levels show counterpropagating supercurrents, thus can be used as a flux qubit. We reveal that this flux qubit has the merits of stability to external noises, tolerance to the deviation of system parameters, and scalability to large numbers. Furthermore, we demonstrate how to couple this flux qubit with the Majorana qubit by tuning the junction parameters, and how to use this coupling to manipulate the Majorana qubit.
This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.
Recent experiments on superconducting flux qubits, consisting of a superconducting loop interrupted by Josephson junctions, have demonstrated quantum coherence between two different quantum states. The state of the qubit is measured with a superconducting quantum interference device (SQUID). Such measurements require the SQUID to have high resolution while exerting minimal backaction on the qubit. By designing shunts across the SQUID junctions appropriately, one can improve the measurement resolution without increasing the backaction significantly. Using a path-integral approach to analyze the Caldeira-Leggett model, we calculate the narrowing of the distribution of the switching events from the zero-voltage state of the SQUID for arbitrary shunt admittances, focusing on shunts consisting of a capacitance Cs{C}_{s}Cs​ and resistance Rs{R}_{s}Rs​ in series. To test this model, we fabricated a dc SQUID in which each junction is shunted with a thin-film interdigitated capacitor in series with a resistor, and measured the switching distribution as a function of temperature and applied magnetic flux. After accounting for the damping due to the SQUID leads, we found good agreement between the measured escape rates and the predictions of our model. We analyze the backaction of a shunted symmetric SQUID on a flux qubit. For the given parameters of our SQUID and realistic parameters for a flux qubit, at the degeneracy point we find a relaxation time of $113\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, which limits the decoherence time to $226\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$. Based on our analysis of the escape process, we determine that a SQUID with purely capacitive shunts should have narrow switching distributions and no dissipation.