Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Effect of inhomogeneous broadening on a DPAL based superluminal laser for precision sensing

Tony Abi-Salloum, J. Yablon, S. Tseng, M. S. Shahriar

Published Feb 7, 2012• 0 citations
Publisher

Abstract

In several applications such as optical gyroscopes, gravitational wave detection, and vibrometry, the precision sensing of the effective length of the optical cavity is key. In this work we show how an active single mode laser with a negatively dispersive medium can enhance the sensitivity of measuring the alteration of the length of the cavity in the practical case of a warm medium. We also state how a Rubidium based Diode Pump Alkali Laser satisfies the requirements of the proposed model.

DOI
10.1117/12.914723

Related papers

Superluminal Raman laser with enhanced cavity length sensitivity

Zifan Zhou, Minchuan Zhou, M. S. Shahriar

We demonstrate experimentally a superluminal ring laser based on optically pumped Raman gain, and a self-pumped Raman depletion for producing anomalous dispersion, employing two isotopes of rubidium. By fitting the experiment data with the theoretical model, we infer that the spectral sensitivity of the superluminal Raman laser to cavity length change is enhanced by a factor of more than a thousand, compared to a conventional laser.

Optics Express•Oct 1, 2019•17 citations

Single Pumped Superluminal Laser

Yael Sternfeld, Zifan Zhou, M. S. Shahriar +1 more

Superluminal lasers operate under the condition in which the average group velocity in the cavity exceeds the vacuum speed of light, or alternatively, the group index is between 0 and 1 [1]. It has been shown in previous works that the sensitivity of the lasing frequency of such a laser with respect to a change in its optical roundtrip due to an external perturbation is expected to be substantially larger than that of a conventional laser, with an enhancement factor which is inversely proportional the group index [2]. This property makes superluminal lasers highly attractive for various sensing applications, primarily for challenging tasks such as gravitational wave detection and navigation grade rotation sensing. The realization of superluminal lasers requires the presence of a narrow dip in the center of a broad gain profile. The depth and width of the dip must be tailored carefully to produce the required dispersion profile yielding the enhanced sensitivity.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 26, 2023•0 citations

Ultra-precise rotation sensing with a superluminal ring laser

H. Yum, J. Yablon, K. Salit +3 more

We show that group velocity of light far exceeding the vacuum speed can be realized when a medium that produces a narrow band dip in the gain profile is placed inside a ring laser. The dip leads to an effective negative dispersion, which can be tuned to produce a very small group index. The rotational sensitivity of the ring laser is enhanced by a factor equaling the inverse of the group index. For a realistic system, the enhancement factor can be as high as 1.8*105. In order to realize such a device, the background gain can be produced by using, for example, an optically pumped Ti:Sapphire crystal, a semiconductor optical amplifier, or a diode pumped alkali laser. The narrow dip can be produced, for example, by a Rb cell configured for Raman depletion. Here, we present the theoretical model behind such a superluminal laser, and describe a preliminary experiment for realizing such a device.

Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ...•Nov 1, 2010•1 citation

Superluminal ring laser as a Holy-Grail of precision metrology: Rotation sensing, accelerometry, fiber-optic sensing and gravitational wave detection

M. S. Shahriar

A superluminal ring laser (SRL) is a laser in which the group velocity of light far exceeds, by a factor as large as a million, the vacuum speed of light, without violating special relativity or causality. This behavior results from the so-called fast light effect, corresponding to critically tuned anomalous dispersion. The anomalous dispersion is produced by adding inside the ring cavity an auxiliary medium that produces a narrow dip in the broad-band gain profile produced by the main gain medium. In an SRL, the change in the laser frequency, as a function of a change in the cavity length, is enhanced by a factor of nearly a million, when compared to that of a conventional ring laser. This effect can be used for enhancing the sensitivity of many devices, including a gyroscope, and accelerometer, and a fiber optic sensor. It can also be configured to realize a novel type of gravitational wave detector. We have realized an SRL using a buffer gas loaded Rb vapor cell, pumped on the D1 line, as the main gain medium, and an additional Rb vapor cell for producing the anomalous dispersion via Raman induced pump depletion. In this talk, the author will describe the behavior of this SRL, and outline the various applications we are pursuing, including rotation sensing and accelerometry for inertial navigation under GPS-denied conditions, and gravitational wave detection. He will also describe a fiber-optic based SRL, employing dual peaked Brillouin gain, for ultra-sensitive, general purpose fiber optic sensing.

Journal of Physical Chemistry & Biophysics•Oct 29, 2014•0 citations

An Inhomogeneously Broadened Superluminal Ring Laser for Rotation Sensing and Accelerometry

J. Yablon, S. Tseng, M. Salit +1 more

We show how a superluminal ring laser can be realized using an inhomogeneously broadened gain medium with the addition of a dip in the gain profile, for application to enhanced precision rotation sensing and accelerometry.

Frontiers in Optics•Jan 1, 2011•1 citation

Enhanced sensing in a double-Raman superluminal ring laser

Tony Abi-Salloum, M. S. Shahriar

We investigate the feasibility of realizing a superluminal ring laser with enhanced sensitivity by using the gain produced via double-Raman pumping in an inverted three-level system. If the laser cavity is tuned to the center between the two gain peaks produced in such a system, it is expected to experience an effective negative dispersion, which can be tuned to the condition necessary for enhancing the sensitivity of the laser frequency to a change in the cavity length. Using a model of two idealized, independent Lorentzian gains, we solve the laser equations to show the enhancement of sensitivity. We then extend our analysis to calculate the gain profile in a real lambda system. Unlike the idealized system mentioned above, where the dual gain peaks are modeled as two adjacent Lorentzians in a manner that ignores the relative coherence between the Raman pumps, we present a more accurate model where this coherence is not neglected. As such, the Hamiltonian remains time dependent after making the rotating wave transformation. Using an approximation --- valid for practical systems --- where higher order terms in the density matrix are neglected, we determine the gain experienced by a weak probe beam. Numerical techniques are needed to incorporate the resulting gain and dispersion profiles into the laser equation to determine accurately the behavior of the superluminal laser. This work will be carried out in the near future. Experimental realization of a superluminal laser based on this approach may prove to be easier than other approaches proposed previously.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 6, 2013•0 citations
In several applications such as optical gyroscopes, gravitational wave detection, and vibrometry, the precision sensing of the effective length of the optical cavity is key. In this work we show how an active single mode laser with a negatively dispersive medium can enhance the sensitivity of measuring the alteration of the length of the cavity in the practical case of a warm medium. We also state how a Rubidium based Diode Pump Alkali Laser satisfies the requirements of the proposed model.
Superluminal lasers operate under the condition in which the average group velocity in the cavity exceeds the vacuum speed of light, or alternatively, the group index is between 0 and 1 [1]. It has been shown in previous works that the sensitivity of the lasing frequency of such a laser with respect to a change in its optical roundtrip due to an external perturbation is expected to be substantially larger than that of a conventional laser, with an enhancement factor which is inversely proportional the group index [2]. This property makes superluminal lasers highly attractive for various sensing applications, primarily for challenging tasks such as gravitational wave detection and navigation grade rotation sensing. The realization of superluminal lasers requires the presence of a narrow dip in the center of a broad gain profile. The depth and width of the dip must be tailored carefully to produce the required dispersion profile yielding the enhanced sensitivity.
We show that group velocity of light far exceeding the vacuum speed can be realized when a medium that produces a narrow band dip in the gain profile is placed inside a ring laser. The dip leads to an effective negative dispersion, which can be tuned to produce a very small group index. The rotational sensitivity of the ring laser is enhanced by a factor equaling the inverse of the group index. For a realistic system, the enhancement factor can be as high as 1.8*105. In order to realize such a device, the background gain can be produced by using, for example, an optically pumped Ti:Sapphire crystal, a semiconductor optical amplifier, or a diode pumped alkali laser. The narrow dip can be produced, for example, by a Rb cell configured for Raman depletion. Here, we present the theoretical model behind such a superluminal laser, and describe a preliminary experiment for realizing such a device.
A superluminal ring laser (SRL) is a laser in which the group velocity of light far exceeds, by a factor as large as a million, the vacuum speed of light, without violating special relativity or causality. This behavior results from the so-called fast light effect, corresponding to critically tuned anomalous dispersion. The anomalous dispersion is produced by adding inside the ring cavity an auxiliary medium that produces a narrow dip in the broad-band gain profile produced by the main gain medium. In an SRL, the change in the laser frequency, as a function of a change in the cavity length, is enhanced by a factor of nearly a million, when compared to that of a conventional ring laser. This effect can be used for enhancing the sensitivity of many devices, including a gyroscope, and accelerometer, and a fiber optic sensor. It can also be configured to realize a novel type of gravitational wave detector. We have realized an SRL using a buffer gas loaded Rb vapor cell, pumped on the D1 line, as the main gain medium, and an additional Rb vapor cell for producing the anomalous dispersion via Raman induced pump depletion. In this talk, the author will describe the behavior of this SRL, and outline the various applications we are pursuing, including rotation sensing and accelerometry for inertial navigation under GPS-denied conditions, and gravitational wave detection. He will also describe a fiber-optic based SRL, employing dual peaked Brillouin gain, for ultra-sensitive, general purpose fiber optic sensing.
We investigate the feasibility of realizing a superluminal ring laser with enhanced sensitivity by using the gain produced via double-Raman pumping in an inverted three-level system. If the laser cavity is tuned to the center between the two gain peaks produced in such a system, it is expected to experience an effective negative dispersion, which can be tuned to the condition necessary for enhancing the sensitivity of the laser frequency to a change in the cavity length. Using a model of two idealized, independent Lorentzian gains, we solve the laser equations to show the enhancement of sensitivity. We then extend our analysis to calculate the gain profile in a real lambda system. Unlike the idealized system mentioned above, where the dual gain peaks are modeled as two adjacent Lorentzians in a manner that ignores the relative coherence between the Raman pumps, we present a more accurate model where this coherence is not neglected. As such, the Hamiltonian remains time dependent after making the rotating wave transformation. Using an approximation --- valid for practical systems --- where higher order terms in the density matrix are neglected, we determine the gain experienced by a weak probe beam. Numerical techniques are needed to incorporate the resulting gain and dispersion profiles into the laser equation to determine accurately the behavior of the superluminal laser. This work will be carried out in the near future. Experimental realization of a superluminal laser based on this approach may prove to be easier than other approaches proposed previously.