Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Frontiers in Optics

Quantum State Reconstruction with a Single-element SSPD at Telecommunication Wavelengths

Jelmer J. Renema, G. Frucci, M. J. A. de Dood, Andrea Fiore, Martin P. van Exter

Published Jan 1, 2012• 0 citations
Publisher

Abstract

We demonstrate high fidelity quantum state reconstruction of coherent and thermal states of light using a single NbN superconducting single photon detector (SSPD). SSPDs outperform commonly used avalanche photodiodes for the task of quantum state reconstruction.
DOI
10.1364/ls.2012.ltu1j.3

Related papers

Recent advances in superconducting NbN single-photon detector development

Alexander A. Korneev, Alexander V. Divochiy, Yu. B. Vachtomin +14 more

Superconducting single-photon detector (SSPD) is a planar nanostructure patterned from 4-nm-thick NbN film deposited on sapphire substrate. The sensitive element of the SSPD is 100-nm-wide NbN strip. The device is operated at liquid helium temperature. Absorption of a photon leads to a local suppression of superconductivity producing subnanosecond-long voltage pulse. In infrared (at 1550 nm and longer wavelengths) SSPD outperforms avalanche photodiodes in terms of detection efficiency (DE), dark counts rate, maximum counting rate and timing jitter. Efficient single-mode fibre coupling of the SSPD enabled its usage in many applications ranging from single-photon sources research to quantum cryptography. Recently we managed to improve the SSPD performance and measured 25% detection efficiency at 1550 nm wavelength and dark counts rate of 10 s-1. We also improved photon-number resolving SSPD (PNR-SSPD) which realizes a spatial multiplexing of incident photons enabling resolving of up to 4 simultaneously absorbed photons. Another improvement is the increase of the photon absorption using a λ/4 microcavity integrated with the SSPD. And finally in our strive to increase the DE at longer wavelengths we fabricated SSPD with the strip almost twice narrower compared to the standard 100 nm and demonstrated that in middle infrared (about 3 μm wavelength) these devices have DE several times higher compared to the traditional SSPDs.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 30, 2011•4 citations

Tomography and state reconstruction with superconducting single-photon detectors

J. J. Renema, G. Frucci, M. J. A. de Dood +3 more

We investigate the performance of a single-element superconducting single-photon detector (SSPD) for quantum state reconstruction. We perform quantum state reconstruction, using the measured photon counting behavior of the detector. Standard quantum state reconstruction assumes a linear response; this simple model fails for SSPDs, which are known to show a nonlinear response intrinsic to the detection mechanism. We quantify the photon counting behavior of the SSPD by a sparsity-based detector tomography technique and use this to perform quantum state reconstruction of both thermal and coherent states. We find that the nonlinearities inherent in the detection process enhance the ability of the detector to do state reconstruction compared to a linear detector with similar efficiency for detecting single photons.

arXiv:1206.5145•Physical Review A•Dec 21, 2012•12 citations

Middle-Infrared to Visible-Light Ultrafast Superconducting Single-Photon Detectors

Gregory N Gol'tsman, Olga V. Minaeva, Alexander A. Korneev +16 more

We present an overview of the state-of-the-art of NbN superconducting single-photon detectors (SSPDs). Our devices exhibit quantum efficiency (QE) of up to 30% in near-infrared wavelength and 0.4% at 5 mum, with a dark-count rate that can be as low as 10-4s-1. The SSPD structures integrated with lambda/4 microcavities achieve a QE of 60% at telecommunication, 1550-nm wavelength. We have also developed a new generation of SSPDs that possess the QE of large-active-area devices, but, simultaneously, are characterized by low kinetic inductance that allows achieving short response times and the GHz-counting rate with picosecond timing jitter. The improvements presented in the SSPD development, such as fiber-coupled SSPDs, make our detectors most attractive for high-speed quantum communications and quantum computing.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•92 citations

Spectroscopy With Nanostructured Superconducting Single Photon Detectors

Elisabeth Reiger, Dong Pan, Wojtek Slysz +10 more

Superconducting single-photon detectors (SSPDs) are nanostructured devices made from ultrathin superconducting films. They are typically operated at liquid helium temperature and exhibit high detection efficiency, in combination with very low dark counts, fast response time, and extremely low timing jitter, within a broad wavelength range from ultraviolet to mid-infrared (up to 6mum). SSPDs are very attractive for applications such as fiber-based telecommunication, where single-photon sensitivity and high photon-counting rates are required. We review the current state-of-the-art in the SSPD research and development, and compare the SSPD performance to the best semiconducting avalanche photodiodes and other superconducting photon detectors. Furthermore, we demonstrate that SSPDs can also be successfully implemented in photon-energy-resolving experiments. Our approach is based on the fact that the size of the hotspot, a nonsuperconducting region generated upon photon absorption, is linearly dependent on the photon energy. We introduce a statistical method, where, by measuring the SSPD system detection efficiency at different bias currents, we are able to resolve the wavelength of the incident photons with a resolution of 50 nm.

IEEE Journal of Selected Topics in Quantum Electronics•Jul 1, 2007•29 citations

Single-Photonics at Telecom Wavelengths Using Superconducting Nanostructured Detectors

Andrea Fiore, Francesco Marsili, David Bitauld +4 more

We report on superconducting single-photon detectors (SSPDs) based on NbN nanowires and their application to single-photon measurements at telecom wavelengths. The detectors are realized by patterning ultra thin (3 - 5 nm-thick) NbN films into meanders of 100 nm-wide wires. The films are deposited by DC magnetron sputtering at relatively low temperatures (≈500 °C) on MgO and GaAs substrates (as compared to the approach of high-temperature deposition on sapphire). In 5 nm-thick films, TCsas high as 10 K and 11 K have been obtained on GaAs and MgO, respectively (Fig. 1). SSPDs have been fabricated by a two-mask process using electron beam lithography and reactive ion etching on 3.5nm thick NbN films deposited under optimal conditions on MgO. The detectors are 5 × 5 μm2in size, and composed of a 100 μm long, 100 nm wide nanowire folded in a meander pattern with filling factor of 40%. Typical room temperature resistivity ρ is of 190 μΩ·cm, and I-V curves at 4.2 K show a critical current density JCof about 6 MA·cm-2, which are state of the art values. Quantum efficiency (QE) was measured illuminating the detectors mounted in a liquid He bath through an optical fiber. Quantum efficiencies >10% are measured at 4.2 K, comparable to best results on sapphire substrates. In particular, SSPDs show a large increase in sensitivity, temporal resolution and maximum counting frequencies as compared to InGaAs avalanche photodiodes.

International Conference on Transparent Optical Networks•Jul 1, 2007•0 citations

Single-photon experiments at telecommunication wavelengths using nanowire superconducting detectors

C. Zinoni, Blandine Alloing, Lianhe H. Li +7 more

The authors report fiber-coupled superconducting single-photon detectors with specifications that exceed those of avalanche photodiodes, operating at telecommunication wavelength, in sensitivity, temporal resolution, and repetition frequency. The improved performance is demonstrated by measuring the intensity correlation function g(2)(τ) of single-photon states at 1300nm produced by single semiconductor quantum dots.

arXiv:physics/0610091•Applied Physics Letters•Jul 16, 2007•67 citations
Superconducting single-photon detector (SSPD) is a planar nanostructure patterned from 4-nm-thick NbN film deposited on sapphire substrate. The sensitive element of the SSPD is 100-nm-wide NbN strip. The device is operated at liquid helium temperature. Absorption of a photon leads to a local suppression of superconductivity producing subnanosecond-long voltage pulse. In infrared (at 1550 nm and longer wavelengths) SSPD outperforms avalanche photodiodes in terms of detection efficiency (DE), dark counts rate, maximum counting rate and timing jitter. Efficient single-mode fibre coupling of the SSPD enabled its usage in many applications ranging from single-photon sources research to quantum cryptography. Recently we managed to improve the SSPD performance and measured 25% detection efficiency at 1550 nm wavelength and dark counts rate of 10 s-1. We also improved photon-number resolving SSPD (PNR-SSPD) which realizes a spatial multiplexing of incident photons enabling resolving of up to 4 simultaneously absorbed photons. Another improvement is the increase of the photon absorption using a λ/4 microcavity integrated with the SSPD. And finally in our strive to increase the DE at longer wavelengths we fabricated SSPD with the strip almost twice narrower compared to the standard 100 nm and demonstrated that in middle infrared (about 3 μm wavelength) these devices have DE several times higher compared to the traditional SSPDs.
We investigate the performance of a single-element superconducting single-photon detector (SSPD) for quantum state reconstruction. We perform quantum state reconstruction, using the measured photon counting behavior of the detector. Standard quantum state reconstruction assumes a linear response; this simple model fails for SSPDs, which are known to show a nonlinear response intrinsic to the detection mechanism. We quantify the photon counting behavior of the SSPD by a sparsity-based detector tomography technique and use this to perform quantum state reconstruction of both thermal and coherent states. We find that the nonlinearities inherent in the detection process enhance the ability of the detector to do state reconstruction compared to a linear detector with similar efficiency for detecting single photons.
We present an overview of the state-of-the-art of NbN superconducting single-photon detectors (SSPDs). Our devices exhibit quantum efficiency (QE) of up to 30% in near-infrared wavelength and 0.4% at 5 mum, with a dark-count rate that can be as low as 10-4s-1. The SSPD structures integrated with lambda/4 microcavities achieve a QE of 60% at telecommunication, 1550-nm wavelength. We have also developed a new generation of SSPDs that possess the QE of large-active-area devices, but, simultaneously, are characterized by low kinetic inductance that allows achieving short response times and the GHz-counting rate with picosecond timing jitter. The improvements presented in the SSPD development, such as fiber-coupled SSPDs, make our detectors most attractive for high-speed quantum communications and quantum computing.
Superconducting single-photon detectors (SSPDs) are nanostructured devices made from ultrathin superconducting films. They are typically operated at liquid helium temperature and exhibit high detection efficiency, in combination with very low dark counts, fast response time, and extremely low timing jitter, within a broad wavelength range from ultraviolet to mid-infrared (up to 6mum). SSPDs are very attractive for applications such as fiber-based telecommunication, where single-photon sensitivity and high photon-counting rates are required. We review the current state-of-the-art in the SSPD research and development, and compare the SSPD performance to the best semiconducting avalanche photodiodes and other superconducting photon detectors. Furthermore, we demonstrate that SSPDs can also be successfully implemented in photon-energy-resolving experiments. Our approach is based on the fact that the size of the hotspot, a nonsuperconducting region generated upon photon absorption, is linearly dependent on the photon energy. We introduce a statistical method, where, by measuring the SSPD system detection efficiency at different bias currents, we are able to resolve the wavelength of the incident photons with a resolution of 50 nm.
We report on superconducting single-photon detectors (SSPDs) based on NbN nanowires and their application to single-photon measurements at telecom wavelengths. The detectors are realized by patterning ultra thin (3 - 5 nm-thick) NbN films into meanders of 100 nm-wide wires. The films are deposited by DC magnetron sputtering at relatively low temperatures (≈500 °C) on MgO and GaAs substrates (as compared to the approach of high-temperature deposition on sapphire). In 5 nm-thick films, TCsas high as 10 K and 11 K have been obtained on GaAs and MgO, respectively (Fig. 1). SSPDs have been fabricated by a two-mask process using electron beam lithography and reactive ion etching on 3.5nm thick NbN films deposited under optimal conditions on MgO. The detectors are 5 × 5 μm2in size, and composed of a 100 μm long, 100 nm wide nanowire folded in a meander pattern with filling factor of 40%. Typical room temperature resistivity ρ is of 190 μΩ·cm, and I-V curves at 4.2 K show a critical current density JCof about 6 MA·cm-2, which are state of the art values. Quantum efficiency (QE) was measured illuminating the detectors mounted in a liquid He bath through an optical fiber. Quantum efficiencies >10% are measured at 4.2 K, comparable to best results on sapphire substrates. In particular, SSPDs show a large increase in sensitivity, temporal resolution and maximum counting frequencies as compared to InGaAs avalanche photodiodes.