We demonstrate the slow group-velocity propagation of electromagnetic pulses through a narrow transmission band of a simple coaxial photonic crystal. The narrow transmission band was formed by creating a defect in a periodic coaxial cable filter which resulted in a narrow-frequency passband within an otherwise forbidden band stop region. Strong normal dispersion within this region causes the group velocity of the pulse to be slowed well below the speed of light and below the expected propagation speed in a coaxial cable. This phenomenon is essentially similar to the much-studied slow light propagation observed in atomic vapors through regions of strong dispersion. The simplicity with which this phenomenon can be observed in a one-dimensional coaxial photonic crystal makes this a versatile experiment for such studies. Group velocities of 0.30c, where c is the speed of light in a vacuum, were observed.
We demonstrate the slow group-velocity propagation of electromagnetic pulses through a narrow transmission band of a simple coaxial photonic crystal. The narrow transmission band was formed by creating a defect in a periodic coaxial cable filter which resulted in a narrow-frequency passband within an otherwise forbidden band stop region. Strong normal dispersion within this region causes the group velocity of the pulse to be slowed well below the speed of light and below the expected propagation speed in a coaxial cable. This phenomenon is essentially similar to the much-studied slow light propagation observed in atomic vapors through regions of strong dispersion. The simplicity with which this phenomenon can be observed in a one-dimensional coaxial photonic crystal makes this a versatile experiment for such studies. Group velocities of 0.30c, where c is the speed of light in a vacuum, were observed.
We have studied the dispersion of ultrafast pulses in a photonic crystal waveguide as a function of optical frequency, in both experiment and theory. With phase-sensitive and time-resolved near-field microscopy, the light was probed inside the waveguide in a non-invasive manner. The effect of dispersion on the shape of the pulses was determined. As the optical frequency decreased, the group velocity decreased. Simultaneously, the measured pulses were broadened during propagation, due to an increase in group velocity dispersion. On top of that, the pulses exhibited a strong asymmetric distortion as the propagation distance increased. The asymmetry increased as the group velocity decreased. The asymmetry of the pulses is caused by a strong increase of higher order dispersion. As the group velocity was reduced to 0.116(9) .c, we found group velocity dispersion of -1.1(3) .10(6) ps(2)/km and third order dispersion of up to 1.1(4) .10(5) ps(3)/km. We have modelled our interferometric measurements and included the full dispersion of the photonic crystal waveguide. Our mathematical model and the experimental findings showed a good correspondence. Our findings show that if the most commonly used slow light regime in photonic crystals is to be exploited, great care has to be taken about higher-order dispersion.
The propagation of a pulse through one-dimensional photonic crystals that contain a dispersive and absorptive defect layer doped with two-level atoms is discussed. The dynamical evolution of the pulse inside the photonic crystal is presented. Superluminal negative group velocity (the peak appears at the exit end before it reaches the input end) is discovered. Although the group velocity is larger than c and even negative, the velocity of energy propagation never exceeds the vacuum light speed. The appearance of the superluminal advance or subluminal delay of the pulse peak inside the photonic crystal or at the exit end is due to the wave interference from Bragg reflections.
The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.
Recently,there has been interest in modifying the group velocity of optical pulses,resulting in stopped,slow,and fast(superluminal)light.According to the physical theory,fast appears in the anomalous medium,and then it so called light medium.There are many experimeuts to produce fast light,this situation opens up new perspectives for the so called dispersion engineering.For example,signal propagating with a group velocity that exceeds the speed of light in vacuum(c) is intriguing for scientists.And then,the traveling of short wave pulses,microwave pulses and light pulses with group velocity vg,whose values exceed infinity,so called negative group velocity(NGV) propagation.Such circumstance occurs when the peak of a pulse traveling through DUT,exits before the peak of the input pulse has reached the beginning of DUT.This effect is counterintuitive,but it is a discover under the experimental basis.When the group velocity of light in a material is negative,it is the NGV medium. Although NGV are possible particularly in gain systems,there have been some experimental demonstrations of that phenomenon in passive systems,such as the coaxial cables,waveguides,micro-strip lines,and optical fibers,etc.If the experimental configuration used with a higher impedance mismatch,then it permits larger group delays,and a corresponding NGV.If n is the effective refraction index of the medium,we wantfn |f/ndn/df|1 to obtain the NGV. Many experiments showed the group velocity can surpass the light speed c,but scientists still lack the further understanding of the results.In 2001,Scientists obtained the formula v-e=|T|2vg,where v-e is average energy velocity,T is transmission coeficient of the system.If we want v-ec,the condition is vgc|T|-2.Hence it can be concluded that only vg/c is very large,the energy velocity can surpass c.This demonstration opens the door to interesting possibilities. The definition of signal velocity by Brillouin,mathemalical meaning exceeds physical meaning.We argue that undistorted wave group(wave packet) propagation are the first consideration.According to this viewpoint,the theoretical analysis show that superluminal propagation(i.e.superluminal communication) was observed by authors of many NGV researchers.……The superluminal group velocity wave propagation,the negative group velocity wave propagation——each of the two cases has its own use.Now,scientists do research works in these fields: such as optical communication,squeezed light and quantum entanglement.The condusion tell us that,a hight efficiency and low-loss fast light scheme may explore potential applications.
Summary form only given. The propagation of light in a dispersive medium is characterized by the group velocity /spl nu//sub g/=c(n+/spl nu//sup dn//d/spl nu/)/sup .1/ where n is the refractive index and /spl nu/ the optical frequency. Depending on the sign and magnitude of /sup dn//d/spl nu/ in the medium, the group velocity can be positive, infinite or negative. The group velocity corresponds to the speed of the propagation of the maximum of an optical pulse travelling into the medium. This remains true whether the dispersion in the medium is normal (/sup dn//d/spl nu/>0) or anomalous (/sup dn//d/spl nu/<0). It has been demonstrated that coherently prepared atomic systems can exhibit steep dispersion leading to small absolute values of the group velocity (slow light). In recent work, we have demonstrated that narrow resonances arising from the coherent interaction of two optical fields with a closed atomic transition between two degenerate levels may correspond to a steep anomalous dispersion and thus to slow and negative group velocity. We report on the experimental study of the propagation of an amplitude modulated wave in a medium presenting negative group velocity.