Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Infrared Millimeter and Terahertz Waves

Superconductor-Insulator-Superconductor Mixers for the 2 mm Band (129-174 GHz)

A. Navarrini, Anne Laure Fontana, Doris Maier, Patrice Serres, Dominique Billon-Pierron

Published May 20, 2014• 7 citations
Publisher
DOI
10.1007/s10762-014-0076-x

Related papers

Micromachined metallic substrates as a technological platform for superconductor–insulator–superconductor tunnel devices

C López, Alexey Pavolotsky, François Joint +3 more

Abstract Millimeter (mm) and sub-mm superconducting structures, such as waveguides and mixers on substrate chips, are pivotal in sensing applications but often suffer from dielectric losses in the substrate at these wavelengths. To address this challenge, we introduce a method for fabricating Superconductor Insulator Superconductor (SIS) mixers that significantly mitigates theses losses by employing micromachined metallic substrates. This approach not only broadens the applicability of SIS devices, including THz mixers, but also demonstrates a novel broadband SIS mixer design for the band of 211–375 GHz. Our design features an electroplated Au substrate for effective waveguide-to-substrate transition and twin SIS junctions using Nb–Al/AlN–Nb technology We validate the viability and integrity of the SIS junction on metallic substrate with cryogenic transport measurements. Our results confirm the stability and quality of the junctions across junction sizes ranging from 0.5 µ m 2 to 3.8 µ m 2 highlighting the potential of our method to enhance the performances and reliability of SIS mixers for THz applications. This work proves the feasibility of our novel fabrication approach and lays the groundwork for future advancements in superconducting technology.

Superconductor Science and Technology•Jun 27, 2025•2 citations

Investigation of NbN-based superconductor-insulator-superconductor mixer at 870 GHz

Lianhao He, Duo Cao, Fangting Lin +1 more

•Jan 1, 2025•0 citations

Demonstration of a Single-Chip Dual-Polarization Sideband-Separation SIS Mixer At 2 Mm Band

Wenlei Shan, Shohei Ezaki, Yoshinori Uzawa

Large-format heterodyne focal plane arrays require highly integrated receiver architectures while maintaining low noise and sufficient sideband rejection, which remains challenging for superconducting SIS mixers at millimeter wavelengths. In this work, we demonstrate, for the first time, a monolithic dual-polarization sideband-separating superconductor-insulator-superconductor (SIS) mixer operating at 2 mm wavelengths (125-163 GHz) on a silicon-on-insulator substrate. The integrated SIS mixer achieves a sideband rejection ratio exceeding 10 dB over the 4-8 GHz intermediate-frequency (IF) band across most of the radio-frequency (RF) range, with a minimum single-sideband (SSB) receiver noise temperature as low as approximately 60 K. As a key building block of the hybrid planar integration (HPI) architecture, this result verifies the feasibility of highly integrated large-format heterodyne focal plane arrays, providing a practical path toward substantially expanding the field of view of millimeter and submillimeter-wave radio telescopes.

arXiv:2606.14124•IEEE Transactions on Terahertz Science and Technology•Jan 1, 2026•1 citation

A quantum mixer at 350 GHz based on superconductor-insulator-superconductor (SIS) junctions.

Cornelia E. Honingh

•Jan 1, 1993•2 citations

The IF Output Impedance of SIS Mixers

Patrice Serres, A. Navarrini, Yves Bortolotti +1 more

In this paper, we describe a measurement setup to characterize the intermediate frequency (IF) impedance of cryogenically cooled superconductor-insulator-superconductor (SIS) mixers. A setup based on a commercial vector network analyzer (VNA), a circulator and a low noise amplifier (LNA) has allowed to increase the dynamic of the VNA and to perform accurate one-port measurements across a high dynamic range of the SIS mixers IF band. The mixers were biased in three different regions of their unpumped IV curve to obtain three known impedances which are close to the classical calibration SOLT standards (Short, Open, Load, Thru): the reference plane was located at the SIS junction itself and the calibration procedure allowed to calibrate out all IF circuitry of the measurement setup, including the on-chip SIS mixer intrinsic capacitance and inductance without requiring to thermally cycle and open the cryostat to locate and measure the different calibration standards. Thus, the devised method provides a simple and direct measurement of the SIS mixers IF impedance which can be used for quick, accurate and highly repeatable IF characterization of any type of millimeter and sub-millimeter wave SIS mixers. The measurement method is described and the experimental results of the IF output impedances of 3 mm band DSB and SSB mixers with 4 GHz wide IFs (across 4-8 GHz) are presented and compared with simulated predictions obtained from combining Tucker's SIS mixer theory and accurate electromagnetic modeling of the mixer structure.

IEEE Transactions on Terahertz Science and Technology•Jan 1, 2014•6 citations

Heterodyne mixing at 70 GHz with superconductor-insulator-superconductor tunnel junctions

Hans J. Hartfuss, K. H. Gundlach

International Journal of Infrared and Millimeter Waves•Sep 1, 1981•8 citations
Abstract Millimeter (mm) and sub-mm superconducting structures, such as waveguides and mixers on substrate chips, are pivotal in sensing applications but often suffer from dielectric losses in the substrate at these wavelengths. To address this challenge, we introduce a method for fabricating Superconductor Insulator Superconductor (SIS) mixers that significantly mitigates theses losses by employing micromachined metallic substrates. This approach not only broadens the applicability of SIS devices, including THz mixers, but also demonstrates a novel broadband SIS mixer design for the band of 211–375 GHz. Our design features an electroplated Au substrate for effective waveguide-to-substrate transition and twin SIS junctions using Nb–Al/AlN–Nb technology We validate the viability and integrity of the SIS junction on metallic substrate with cryogenic transport measurements. Our results confirm the stability and quality of the junctions across junction sizes ranging from 0.5 µ m 2 to 3.8 µ m 2 highlighting the potential of our method to enhance the performances and reliability of SIS mixers for THz applications. This work proves the feasibility of our novel fabrication approach and lays the groundwork for future advancements in superconducting technology.
Large-format heterodyne focal plane arrays require highly integrated receiver architectures while maintaining low noise and sufficient sideband rejection, which remains challenging for superconducting SIS mixers at millimeter wavelengths. In this work, we demonstrate, for the first time, a monolithic dual-polarization sideband-separating superconductor-insulator-superconductor (SIS) mixer operating at 2 mm wavelengths (125-163 GHz) on a silicon-on-insulator substrate. The integrated SIS mixer achieves a sideband rejection ratio exceeding 10 dB over the 4-8 GHz intermediate-frequency (IF) band across most of the radio-frequency (RF) range, with a minimum single-sideband (SSB) receiver noise temperature as low as approximately 60 K. As a key building block of the hybrid planar integration (HPI) architecture, this result verifies the feasibility of highly integrated large-format heterodyne focal plane arrays, providing a practical path toward substantially expanding the field of view of millimeter and submillimeter-wave radio telescopes.
In this paper, we describe a measurement setup to characterize the intermediate frequency (IF) impedance of cryogenically cooled superconductor-insulator-superconductor (SIS) mixers. A setup based on a commercial vector network analyzer (VNA), a circulator and a low noise amplifier (LNA) has allowed to increase the dynamic of the VNA and to perform accurate one-port measurements across a high dynamic range of the SIS mixers IF band. The mixers were biased in three different regions of their unpumped IV curve to obtain three known impedances which are close to the classical calibration SOLT standards (Short, Open, Load, Thru): the reference plane was located at the SIS junction itself and the calibration procedure allowed to calibrate out all IF circuitry of the measurement setup, including the on-chip SIS mixer intrinsic capacitance and inductance without requiring to thermally cycle and open the cryostat to locate and measure the different calibration standards. Thus, the devised method provides a simple and direct measurement of the SIS mixers IF impedance which can be used for quick, accurate and highly repeatable IF characterization of any type of millimeter and sub-millimeter wave SIS mixers. The measurement method is described and the experimental results of the IF output impedances of 3 mm band DSB and SSB mixers with 4 GHz wide IFs (across 4-8 GHz) are presented and compared with simulated predictions obtained from combining Tucker's SIS mixer theory and accurate electromagnetic modeling of the mixer structure.