The quantum effects on a cavity mode of the electromagnetic field caused by measuring one of its quadrature components is analyzed. We consider three measurement schemes: an intracavity quantum-nondemolition coupling to another mode, simple homodyne detection, and balanced homodyne detection. It is shown that, for suitable initial conditions, the first scheme has an effect which approaches that of a projective collapse of the state vector for long measurement times. However, the two homodyne schemes (which are shown to be equivalent for large local-oscillator amplitudes) do not approximate a projective measurement in any limit. In particular, it is shown that homodyne measurement cannot produce a squeezed state from a classical initial state. All three schemes are analyzed in terms of ``quantum trajectories'' which link measurement theory with stochastic quantum-jump processes.
The quantum effects on a cavity mode of the electromagnetic field caused by measuring one of its quadrature components is analyzed. We consider three measurement schemes: an intracavity quantum-nondemolition coupling to another mode, simple homodyne detection, and balanced homodyne detection. It is shown that, for suitable initial conditions, the first scheme has an effect which approaches that of a projective collapse of the state vector for long measurement times. However, the two homodyne schemes (which are shown to be equivalent for large local-oscillator amplitudes) do not approximate a projective measurement in any limit. In particular, it is shown that homodyne measurement cannot produce a squeezed state from a classical initial state. All three schemes are analyzed in terms of ``quantum trajectories'' which link measurement theory with stochastic quantum-jump processes.
We suggest an interferometric scheme assisted by squeezing and linear feedback to realize the whole class of field-quadrature quantum nondemolition measurements, from Von Neumann projective measurement to a fully nondestructive noninformative one. In our setup, the signal under investigation is mixed with a squeezed probe in an interferometer and, at the output, one of the two modes is revealed through homodyne detection. The second beam is then amplitude-modulated according to the outcome of the measurement, and finally squeezed according to the transmittivity of the interferometer. Using strongly squeezed or antisqueezed probes respectively, one achieves either a projective measurement, i.e., homodyne statistics arbitrarily close to the intrinsic quadrature distribution of the signal, and conditional outputs approaching the corresponding eigenstates, or a fully nondestructive one, characterized by an almost uniform homodyne statistics, and by an output state arbitrarily close to the input signal. By varying the squeezing between these two extremes, or simply by tuning the internal phase shift of the interferometer, the whole set of intermediate cases may also be obtained. In particular, an optimal quantum nondemolition measurement of quadrature may be achieved, which minimizes the information gain versus state disturbance tradeoff.
The balanced homodyne detector is the paradigm of phase-sensitive detection schemes in quantum optics. We study the effects of a quantum local oscillator in a coherent state for this detector when it is coupled to a single signal mode. We calculate explicit general expressions for the output statistics of the difference current of this detector (applicable even to non-classical states), and compare them to the statistics of the so-called quadrature-phase amplitude. We show that the naive condition that the number of quanta in the local oscillator be much larger than the number in the signal is not sufficient to ensure that the homodyne detector approximates an ideal detectorof the quadrature-phase amplitude, further, we derive explicit conditions for this approximation to be achieved when the signal is a coherent state or a superposition of coherent states.
We use the quantum trajectory (stochastic wave function) approach to simulate the dynamics of a cavity QED system. The system consists of one atom interacting on resonance with one mode of a coherently driven optical cavity. We simulate a variety of different measurements on this system. The simulation of direct photoelectric detection produces trajectories that illustrate the collapse of the wave function in delayed photon coincidence measurements. It also allows us to calculate waiting-time distributions, photoelectron counting distributions, and the mean transmitted intensity as a function of the excitation frequency and field strength. A simulation with frequency filtering of the stochastic wave fuction gives results for optical spectra. From a simulation of homodyne detection we obtain trajectories showing the fluctuations in the quadrature phase amplitudes of the intracavity field and the atomic dipole. These simulations are used to calculate spectra of squeezing. We show that when the cavity is excited near one of the "vacuum" Rabi resonances, the composite atom-cavity system behaves like a two-state system. Under these conditions the optical spectrum shows Mollow sidebands caused by a dynamic Stark shift of the Jaynes-Cummings eigenstates. Thus, in this measurement we are observing the "dressing" of the (one-quantum) dressed states.
The double-homodyne and the heterodyne detection schemes for phase shifts between two synchronous modes of the electromagnetic field are analyzed in the framework of quantum estimation theory. The probability operator-valued measures (POM's) of the detectors are evaluated and compared with the ideal one in the limit of strong local reference oscillator. The present operational approach leads to a reasonable definition of phase measurement, whose sensitivity is actually related to the output r.m.s. noise of the photodetector. We emphasize that the simple-homodyne scheme does not correspond to a proper phase-shift measurements as it is just a zero-point detector. The sensitivity of all detection schemes are optimized at fixed energy with respect to the input state of radiation. It is shown that the optimal sensitivity can be actually achieved using suited squeezed states.
This is a theoretical thesis in the area of quantum measurement theory. Due to the extensive breadth of this field we choose to narrow our focus to examine a particular problem - the quantum Zeno effect (defined below). Quantum measurement theory is introduced in Chap. 1, using the terminology of effects and operations. This approach allows an operational definition of such terms as a state vector, an ensemble, and a measurement device (for instance), and a consideration of interactions between quantum systems and inaccurate measurement devices. We further introduce the quantum trajectories approach to consider the evolution of an individual quantum system subject to measurement. The quantum Zeno effect is introduced in Chap. 2. Any quantum treatment of a measurement interaction must consider the measurement backaction onto the measured system and this backaction will disrupt the free evolution of the system. The quantum Zeno effect occurs in the strong measurement limit where the measurement backaction totally freezes the evolution of the system, thus rendering the measurement useless. The effect is introduced via projective measurements of two level systems subject to measurement of level populations. At this stage we are able to discuss the main questions addressed by this thesis, and present its structure in Chap. 2. We then develop a new measurement model for the interaction between a system and a measurement device in Chap. 3. Our motivation in doing this is to better model the usual laboratory meter, and in our approach the meter dynamics are such that it relaxes towards an appropriate readout of the system parameter of interest. The irreducible quantum noise of the meter introduces fluctuations that drive the stochastic dynamical collapse of the system wavefunction. In our model, the measured system dynamics (if treated selectively) are described by a stochastic, nonlinear Schroedinger equation. A double well system subject to position measurement provides a natural first application for this model. This is done in Chap. 4 where we monitor the coherent tunnelling of a particle from one well to the other. The advantage afforded by considering this system is that it displays differing regimes where the measurement observable (position) is approximated as possessing either, respectively, a continuous or a discrete eigenvalue structure. Thus, we use this one model to explore the quantum Zeno effect in both measurement regimes. The above treatment is of a theoretical measurement model. In Chap. 5 we turn to consider a recent experimental test of the quantum Zeno effect which examined the dynamics of a two level atom subject to pulsed measurements of atomic level populations. We treat a slightly modified experiment in a fully continuous measurement regime. By first unravelling the optical Bloch equations, and second, using the quantum trajectories approach we demonstrate the existence of certain measurement regimes where there is a quantum Zeno effect, and other regimes where no measurement of the atomic populations is being effected at all. Through these results we demonstrate the importance of making a full analysis of the system-detector interaction before any conclusions can be made. In the remainder of the thesis we propose further possible tests of the quantum Zeno effect. In Chap. 6 the evolution of a Rydberg atom exchanging one photon with a single cavity mode subject to measurement is examined. The measurement is made by monitoring the photon number occupancy of the cavity mode using a beam of Rydberg atoms configured so as to perform phase sensitive detection. In the limit of frequent monitoring we show that the free oscillation of the atomic inversion is disrupted, and the atom is trapped close to its initial state. This is the quantum Zeno effect. In Chap. 7 we realize the Zeno effect on two possible systems. We consider first, a two level Jaynes-Cumming atom interacting with a cavity mode, and second, two electromagnetic modes configured as a multi-level parametric frequency converter. These systems interact with another cavity mode via a quadratic coupling system based on four wave mixing, and constructed to be a quantum nondemolition measurement of the photon number. This mode is damped to the environment thus effecting a measurement of the system populations. Again we show that this interaction, can manifest the quantum Zeno effect. Our explicit modelling of the system-detector interaction enables us to show how the effect depends on the resolution time of the detector. Finally, we consider a proposed measurement of the square of the quadrature phase of an electromagnetic mode in Chap. 8. Here, a three mode interaction mediated by a second order nonlinear susceptibility is considered. One mode, the pump, is prepared in a feedback generated photon number state to give insight into the role of pump noise. The other two modes are treated as an angular momentum system, and we show that photon counting on the two mode rotation system effects the above mentioned measurement. In addition, this measurement provides a direct measure of the second order squeezing of the signal. With that we finish our investigation of the quantum Zeno effect using the techniques of quantum measurement theory. However, in the epilogue [Chap. 9] we note that no thesis in quantum measurement theory would be complete without some consideration of the ``meaning attributed to the theory. In the epilogue we take a novel historical approach and examine the method by which metaphysical theories are formed to draw conclusions regarding quantum metaphysics.
We discuss a balanced homodyne detection scheme with imperfect detectors in the framework of the operational approach to quantum measurement. We show that a realistic homodyne measurement is described by a family of operational observables that depends on the experimental setup, rather than a single field quadrature operator. We find an explicit form of this family, which fully characterizes the experimental device and is independent of a specific state of the measured system. We also derive operational homodyne observables for the setup with a random phase, which has been recently applied in an ultrafast measurement of the photon statistics of a pulsed diode laser. The operational formulation directly gives the relation between the detected noise and the intrinsic quantum fluctuations of the measured field. We demonstrate this with two examples: the operational uncertainty relation for the field quadratures, and the homodyne detection of suppressed fluctuations in photon statistics.