Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Transactions on Fundamentals of Electronics Communications and Computer Sciences

Selection of Test Patterns in an Iterative Erasure and Error Decoding Algorithm for Non-binary Block Codes

Hitoshi Tokushige, I. Hisadomi, Tadao Kasami

Published Nov 1, 2006• 2 citations
Publisher

Abstract

This letter considers an iterative decoding algorithm for non-binary linear block codes in which erasure and error decoding is performed for input words given by the sums of a hard-decision received sequence and given test patterns. We have proposed a new selection method of test patterns for the iterative decoding algorithm. Simulation results have shown that the decoding algorithm with test patterns by the proposed selection method provides better error performance than a conventional iterative decoding algorithm with the same number of the error and erasure decoding iterations over an additive white Gaussian noise channel using binary phase-shift keying modulation.

DOI
10.1093/ietfec/e89-a.11.3355

Related papers

A test pattern selection method for a joint bounded-distance and encoding-based decoding algorithm of binary codes [Transactions Letters

Hitoshi Tokushige, Marc C. Foss, Tadao Kasami

For binary linear block codes, this letter deals with a class of decoding algorithms which utilize bounded-distance and encoding-based decodings with input sequences that are calculated from a received sequence and given test patterns. We propose a new method for selecting the test patterns by simulation. The effectiveness of the decoding algorithm whose test patterns are selected by the proposed method is also shown by simulation.

IEEE Transactions on Communications•Jun 1, 2010•4 citations

On soft-decision iterative decoding algorithms by using algebraic decoding for RS codes

Hitoshi Tokushige, I. Hisadomi, Tadao Kasami

We consider an iterative decoding algorithm by using algebraic decoding for non-binary codes. In the decoding algorithm, algebraic decoding are carried out with respect to successively chosen input words, called the search centers. We present a new method for selecting sequences of search centers of algebraic decoding. Over the AWGN channel using BPSK signaling, we show simulation results on the error performances of the iterative decoding algorithms whose search centers are given by the proposed method, abbreviated IAD, for Reed-Solomon codes. From the simulation results, IAD provides considerably better error performance than GMD and CGA decoding with the same number of iterations.

Globecom•Mar 22, 2004•3 citations

Study on Iterative Soft-Decision Decoding Algorithms for Binary Linear Block Codes

卓也 甲本

For iterative soft-decision decoding algorithms for binary linear block codes, error performance and computational complexity are very important factors.In this thesis, suÆcient conditions of the optimality of decoded codeword and a suÆcient condition which is used for ruling-out some useless iterations of bounded distance decoding which reduces the computational complexity of iterative soft-decision decoding algorithms are shown.New iterative soft-decision decoding algorithms which uses the suÆcient conditions of the optimality of decoded codeword to achievegood error performance with small computational complexity are also shown.First, the suÆcient conditions are derived based on: (1) partial knowledge of the distance pro le of the code, and (2) previously generated candidate codewords.When the numberof previously generated candidate codewords is greater than 1, the conditions presented here are less stringent than those derived by Taipale and Pursley [4] and Kaneko et.al.[5].The condition based on three previously generated candidate codewords is the rst such s u Æ c i e n t condition that has ever been derived.It is shown by computer simulation that these suÆcient condions reduce the computational complexity of iterative decoding algorithms without degradation of error performance.Second, a suÆcient condition to rule-out some useless test error patterns is derived.In an iterative decoding algorithm, such as Chase Type-II decoding algorithm[2] and its improved versions, candidate codewords for a received vector are generated

•Mar 24, 1999•1 citation

An efficient information set algorithm for soft-decision decoding of linear block codes

Dulte José de Barros, B.G. Dorsch

This paper presents an approach to soft-decision decoding for a (n, k) binary linear block code. This approach achieves near-optimal to optimal performance for any signal-to-noise ratio value. The proposed decoding is based on the reordering of the received symbols according to their reliability measure and can be applied to any binary linear code. The basic idea is to generate a sequence of codewords such that there will be a high probability that the next codeword is closer to the received vector. In this algorithm the information provided by the soft-decisions is used to generate information sets utilized in decoding. A fast procedure checks whether a given set of k positions is an information set. A sequence of codewords is reconstructed using a sequence of information sets. Each codeword reconstructed is compared with the received word and the closest one is selected. Hence, the decoding algorithm is an iterative procedure designed to enhance the performance of the usual soft-decision decoding, since with each iteration of the procedure, real vectors successively closer to the received vector are examined. A high performance stop rule is utilized to reduce the number of generated information sets, stopping the decoding process when a codeword is closest to the received sequence.

IEEE International Symposium on Information Theory (ISIT)•Nov 22, 2002•1 citation

The Stopping Set Property and the Iterative Decoding Perfor- mance of Binary Block Codes on BSC and AWGN Channel

Zhijie Ren

In the field of Error Correcting Coding (ECC), the concept of ''stopping set'' recently became a hot topic. A stopping set for a parity-check matrix is the set of bits which would cause the iterative decoding progress in Binary Erasure Channel (BEC) to ''stop'' when it is erased. It has already been proved in several papers that the decoding performance under iterative decoding algorithm of any linear block code in BEC is determined by their stopping set performance, in particular, their size and number. And it is commonly assumed by the coding researchers that those codes which have better stopping set performance would also perform better in other channels. In this thesis, the decoding performance of linear block codes, in particular, Hamming Codes, the original LDPC code proposed by Gallager and FG-LDPC codes is studied in Binary Symmetric Channel (BSC) and Additive White Gaussian Noise (AWGN) channel. Three iterative decoding algorithms, respectively Bit-Flipping algorithm, Weighted Bit-Flipping algorithm and Sum Product Algorithm are used. To emphasize the influence of stopping set property, the parity-check matrix for each code is modified by adding linearly dependent rows to the original parity-check matrix, or removing rows from it. These modifications are made in order to change the stopping set property of the codes. The performance of the modified parity-check matrices is thus analyzed, by comparing them to the original ones, using both theoretical analysis and simulation. The results show that the stopping set performance of linear block codes is not a crucial factor to their performances on other channels as it is in BEC. Sometimes the linear block codes of a better stopping set property do perform better in other channels, but sometimes the performance barely changes or even degrades. More precisely, the decoding performance of a certain parity-check matrix is determined by the type of codes, the type of channel and the decoding algorithm, rather than its stopping set property.

•Sep 26, 2011•1 citation

A low-weight trellis-based iterative soft-decision decoding algorithm for binary linear block codes

Takuya Koumoto, T. Takata, Tadao Kasami +1 more

This paper presents a new low-weight trellis-based soft-decision iterative decoding algorithm for binary linear block codes. The algorithm is devised based on a set of optimality conditions and the generation of a sequence of candidate codewords for an optimality test. The initial candidate codeword is generated by a simple decoding method. The subsequent candidate codewords, if needed, are generated by a chain of low-weight trellis searches, one at a time. Each search is conducted through a low-weight trellis diagram centered around the latest candidate codeword and results in an improvement over the previous candidate codewords that have been already tested. This improvement is then used as the next candidate codeword for a test of optimality. The decoding iteration stops whenever a candidate codeword is found to satisfy a sufficient condition on optimality or the latest low-weight trellis search results in a repetition of a previously generated candidate codeword. A divide-and-conquer technique is also presented for codes that are not spanned by their minimum-weight codewords. The proposed decoding algorithm has been applied to some well-known codes of lengths 48, 64, and 128. Simulation results show that the proposed algorithm achieves either practically optimal error performance for the example codes of length 48 and 64 or near optimal error performance for the (128, 29, 32) RM code with a significant reduction in computational decoding complexity.

IEEE Transactions on Information Theory•Mar 1, 1999•13 citations
This letter considers an iterative decoding algorithm for non-binary linear block codes in which erasure and error decoding is performed for input words given by the sums of a hard-decision received sequence and given test patterns. We have proposed a new selection method of test patterns for the iterative decoding algorithm. Simulation results have shown that the decoding algorithm with test patterns by the proposed selection method provides better error performance than a conventional iterative decoding algorithm with the same number of the error and erasure decoding iterations over an additive white Gaussian noise channel using binary phase-shift keying modulation.
We consider an iterative decoding algorithm by using algebraic decoding for non-binary codes. In the decoding algorithm, algebraic decoding are carried out with respect to successively chosen input words, called the search centers. We present a new method for selecting sequences of search centers of algebraic decoding. Over the AWGN channel using BPSK signaling, we show simulation results on the error performances of the iterative decoding algorithms whose search centers are given by the proposed method, abbreviated IAD, for Reed-Solomon codes. From the simulation results, IAD provides considerably better error performance than GMD and CGA decoding with the same number of iterations.
For iterative soft-decision decoding algorithms for binary linear block codes, error performance and computational complexity are very important factors.In this thesis, suÆcient conditions of the optimality of decoded codeword and a suÆcient condition which is used for ruling-out some useless iterations of bounded distance decoding which reduces the computational complexity of iterative soft-decision decoding algorithms are shown.New iterative soft-decision decoding algorithms which uses the suÆcient conditions of the optimality of decoded codeword to achievegood error performance with small computational complexity are also shown.First, the suÆcient conditions are derived based on: (1) partial knowledge of the distance pro le of the code, and (2) previously generated candidate codewords.When the numberof previously generated candidate codewords is greater than 1, the conditions presented here are less stringent than those derived by Taipale and Pursley [4] and Kaneko et.al.[5].The condition based on three previously generated candidate codewords is the rst such s u Æ c i e n t condition that has ever been derived.It is shown by computer simulation that these suÆcient condions reduce the computational complexity of iterative decoding algorithms without degradation of error performance.Second, a suÆcient condition to rule-out some useless test error patterns is derived.In an iterative decoding algorithm, such as Chase Type-II decoding algorithm[2] and its improved versions, candidate codewords for a received vector are generated
This paper presents an approach to soft-decision decoding for a (n, k) binary linear block code. This approach achieves near-optimal to optimal performance for any signal-to-noise ratio value. The proposed decoding is based on the reordering of the received symbols according to their reliability measure and can be applied to any binary linear code. The basic idea is to generate a sequence of codewords such that there will be a high probability that the next codeword is closer to the received vector. In this algorithm the information provided by the soft-decisions is used to generate information sets utilized in decoding. A fast procedure checks whether a given set of k positions is an information set. A sequence of codewords is reconstructed using a sequence of information sets. Each codeword reconstructed is compared with the received word and the closest one is selected. Hence, the decoding algorithm is an iterative procedure designed to enhance the performance of the usual soft-decision decoding, since with each iteration of the procedure, real vectors successively closer to the received vector are examined. A high performance stop rule is utilized to reduce the number of generated information sets, stopping the decoding process when a codeword is closest to the received sequence.
In the field of Error Correcting Coding (ECC), the concept of ''stopping set'' recently became a hot topic. A stopping set for a parity-check matrix is the set of bits which would cause the iterative decoding progress in Binary Erasure Channel (BEC) to ''stop'' when it is erased. It has already been proved in several papers that the decoding performance under iterative decoding algorithm of any linear block code in BEC is determined by their stopping set performance, in particular, their size and number. And it is commonly assumed by the coding researchers that those codes which have better stopping set performance would also perform better in other channels. In this thesis, the decoding performance of linear block codes, in particular, Hamming Codes, the original LDPC code proposed by Gallager and FG-LDPC codes is studied in Binary Symmetric Channel (BSC) and Additive White Gaussian Noise (AWGN) channel. Three iterative decoding algorithms, respectively Bit-Flipping algorithm, Weighted Bit-Flipping algorithm and Sum Product Algorithm are used. To emphasize the influence of stopping set property, the parity-check matrix for each code is modified by adding linearly dependent rows to the original parity-check matrix, or removing rows from it. These modifications are made in order to change the stopping set property of the codes. The performance of the modified parity-check matrices is thus analyzed, by comparing them to the original ones, using both theoretical analysis and simulation. The results show that the stopping set performance of linear block codes is not a crucial factor to their performances on other channels as it is in BEC. Sometimes the linear block codes of a better stopping set property do perform better in other channels, but sometimes the performance barely changes or even degrades. More precisely, the decoding performance of a certain parity-check matrix is determined by the type of codes, the type of channel and the decoding algorithm, rather than its stopping set property.
This paper presents a new low-weight trellis-based soft-decision iterative decoding algorithm for binary linear block codes. The algorithm is devised based on a set of optimality conditions and the generation of a sequence of candidate codewords for an optimality test. The initial candidate codeword is generated by a simple decoding method. The subsequent candidate codewords, if needed, are generated by a chain of low-weight trellis searches, one at a time. Each search is conducted through a low-weight trellis diagram centered around the latest candidate codeword and results in an improvement over the previous candidate codewords that have been already tested. This improvement is then used as the next candidate codeword for a test of optimality. The decoding iteration stops whenever a candidate codeword is found to satisfy a sufficient condition on optimality or the latest low-weight trellis search results in a repetition of a previously generated candidate codeword. A divide-and-conquer technique is also presented for codes that are not spanned by their minimum-weight codewords. The proposed decoding algorithm has been applied to some well-known codes of lengths 48, 64, and 128. Simulation results show that the proposed algorithm achieves either practically optimal error performance for the example codes of length 48 and 64 or near optimal error performance for the (128, 29, 32) RM code with a significant reduction in computational decoding complexity.