Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Optical data encryption using time-dependent dynamics of refractive index changes in LiNbO_3

Daniel Sando, Esa A. Jaatinen

Published Aug 12, 2013• 6 citations
Publisher

Abstract

We present a method for optical encryption of information, based on the time-dependent dynamics of writing and erasure of refractive index changes in a bulk lithium niobate medium. Information is written into the photorefractive crystal with a spatially amplitude-modulated laser beam which when overexposed significantly degrades the stored data making it unrecognizable. We show that the degradation can be reversed and that a one-to-one relationship exists between the degradation and recovery rates. It is shown that this simple relationship can be used to determine the erasure time required for decrypting the scrambled index patterns. In addition, this method could be used as a straightforward general technique for determining characteristic writing and erasure rates in photorefractive media.

DOI
10.1364/oe.21.019510

Related papers

Encrypted optical storage with wavelength-key and random phase codes

Osamu Matoba, Bahram Javidi

An encrypted optical memory system that uses a wavelength code as well as input and Fourier-plane random phase codes is proposed. Original data are illuminated by a coherent light source with a specified wavelength and are then encrypted with two random phase codes before being stored holographically in a photorefractive material. Successful decryption requires the use of a readout beam with the same wavelength as that used in the recording, in addition to the correct phase key in the Fourier plane. The wavelength selectivity of the proposed system is evaluated numerically. We show that the number of available wavelength keys depends on the correlation length of the phase key in the Fourier plane. Preliminary experiments of encryption and decryption of optical memory in a LiNbO(3):Fe photorefractive crystal are demonstrated.

Applied Optics•Nov 10, 1999•92 citations

Optical storage using refractive index changes induced by two-step excitation

Dietrich von der Linde, Alexander M. Glass, K. F. Rodgers

Multiphoton excitation allows reversible photorefractive recording without the disadvantage of erasure during readout. The light intensity required for two-photon storage can be drastically reduced if two-step excitation via long†lived real intermediate states is used. Experimental results for LiNbO3:Cr3+ and LiTaO3:Cr3+ demonstrate the advantages of the two-step process. The energy and intensity requirements for optical two-step recording are within reach of presently available repetitively pulsed lasers.

Journal of Applied Physics•Jan 1, 1976•81 citations

High performance encryption method and all-optical authentic memory with photorefractive crystal

Akifumi Mita, Atsushi Okamoto, Noriyasu Tsuji +1 more

We propose an all-optical encryption memory using the photorefractive four wave mixing and random phase masks. In our encryption method, the image data are encrypted to white noise by the phase shift patterns added on the signal beam with the image data and the reference beam through the random phase masks. Only reading beam with the phase-conjugated distribution of the reference beam can restore the encrypted data. If the encrypted data are read out by incorrect phase pattern, the output data can't be obtained because of the wavefront mismatch between the recorded hologram and the reading beam. We evaluate the encryption and decryption process by analyzing the diffraction efficiency with consideration of the angular spectrum. We show that high performance encryption that high contrast and high gradation image data can be decrypted accurately and the output data are perfectly dark by using the incorrect decryption key can be realized theoretically.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 17, 2002•1 citation

Dynamics of refractive-index grating formation in a Kerr medium

Ragini Saxena, Pochi Yeh

Light-induced change in the index of refraction of a Kerr medium is well known.1 Illumination with a spatially periodic light intensity leads to the formation of an index grating in the Kerr medium. We make a comparative study of the response time and power requirement for index grating formation in photorefractive and Kerr media. We examine the conditions in which the index grating in the Kerr medium will be spatially shifted from the light intensity that induces it. Two-beam coupling via Bragg diffraction from the nonlocal index grating is studied.2 The coupling constant is found to depend on the relaxation mechanism of the atoms in the Kerr media and the frequency detunings of the two beams from the line center.

Annual Meeting Optical Society of America•Jan 1, 1988•0 citations

Data encryption of optical fibre communication using pseudo-random spatial light modulation

Marcin Kowalski, M. Życzkowski

Abstract We propose and study a new technique for securing fibre data communication. The paper presents a method for optical encryption of information transmitted with a traditional fibre link. The encryption method uses a spatial light modulator which converts light pulses representing original data into pseudo-random patterns. A linear combination of light pulses with pseudo-random patterns provides a required encryption performance. The main element of the encryptor is the spatial light modulator which comprises a matrix of cells selectively transmitting or blocking the light beam depending on the pseudo-random configuration of cells. The encrypted information is transmitted through the optical fibre. The decryption process relies on a computational solving of linear program or greedy pursuit. We present a brief description of the method, theoretical analysis and results of numerical simulation. A physical model concept of the method is also presented.

Opto-Electronics Review•Jan 1, 2016•9 citations

Secure ultrafast communication with spatial-temporal converters

Osamu Matoba, Bahram Javidi

An encrypted database interfaced with an ultrafast secure data communication system using spatial-temporal converters is proposed. The original spatial signal is optically encrypted, and the encrypted signal is holographically stored in a storage medium such as photorefractive materials. The spatially encrypted signal is sampled to avoid the overlap of each datum at the receiver. The sampled data are converted into a temporal signal to transmit the information through an optical fiber. At the receiver the temporal signal is converted back into the spatially encrypted signal. Retrieval of the original data can be achieved when the correct phase key is used in the decryption system. We developed an expression for encrypted output and decrypted data. We numerically evaluate the effect of sampling the spatially encrypted signal on the quality of the decrypted data.

Applied Optics•Jun 10, 2000•19 citations
We present a method for optical encryption of information, based on the time-dependent dynamics of writing and erasure of refractive index changes in a bulk lithium niobate medium. Information is written into the photorefractive crystal with a spatially amplitude-modulated laser beam which when overexposed significantly degrades the stored data making it unrecognizable. We show that the degradation can be reversed and that a one-to-one relationship exists between the degradation and recovery rates. It is shown that this simple relationship can be used to determine the erasure time required for decrypting the scrambled index patterns. In addition, this method could be used as a straightforward general technique for determining characteristic writing and erasure rates in photorefractive media.
An encrypted optical memory system that uses a wavelength code as well as input and Fourier-plane random phase codes is proposed. Original data are illuminated by a coherent light source with a specified wavelength and are then encrypted with two random phase codes before being stored holographically in a photorefractive material. Successful decryption requires the use of a readout beam with the same wavelength as that used in the recording, in addition to the correct phase key in the Fourier plane. The wavelength selectivity of the proposed system is evaluated numerically. We show that the number of available wavelength keys depends on the correlation length of the phase key in the Fourier plane. Preliminary experiments of encryption and decryption of optical memory in a LiNbO(3):Fe photorefractive crystal are demonstrated.
Multiphoton excitation allows reversible photorefractive recording without the disadvantage of erasure during readout. The light intensity required for two-photon storage can be drastically reduced if two-step excitation via long†lived real intermediate states is used. Experimental results for LiNbO3:Cr3+ and LiTaO3:Cr3+ demonstrate the advantages of the two-step process. The energy and intensity requirements for optical two-step recording are within reach of presently available repetitively pulsed lasers.
We propose an all-optical encryption memory using the photorefractive four wave mixing and random phase masks. In our encryption method, the image data are encrypted to white noise by the phase shift patterns added on the signal beam with the image data and the reference beam through the random phase masks. Only reading beam with the phase-conjugated distribution of the reference beam can restore the encrypted data. If the encrypted data are read out by incorrect phase pattern, the output data can't be obtained because of the wavefront mismatch between the recorded hologram and the reading beam. We evaluate the encryption and decryption process by analyzing the diffraction efficiency with consideration of the angular spectrum. We show that high performance encryption that high contrast and high gradation image data can be decrypted accurately and the output data are perfectly dark by using the incorrect decryption key can be realized theoretically.
Light-induced change in the index of refraction of a Kerr medium is well known.1 Illumination with a spatially periodic light intensity leads to the formation of an index grating in the Kerr medium. We make a comparative study of the response time and power requirement for index grating formation in photorefractive and Kerr media. We examine the conditions in which the index grating in the Kerr medium will be spatially shifted from the light intensity that induces it. Two-beam coupling via Bragg diffraction from the nonlocal index grating is studied.2 The coupling constant is found to depend on the relaxation mechanism of the atoms in the Kerr media and the frequency detunings of the two beams from the line center.
Abstract We propose and study a new technique for securing fibre data communication. The paper presents a method for optical encryption of information transmitted with a traditional fibre link. The encryption method uses a spatial light modulator which converts light pulses representing original data into pseudo-random patterns. A linear combination of light pulses with pseudo-random patterns provides a required encryption performance. The main element of the encryptor is the spatial light modulator which comprises a matrix of cells selectively transmitting or blocking the light beam depending on the pseudo-random configuration of cells. The encrypted information is transmitted through the optical fibre. The decryption process relies on a computational solving of linear program or greedy pursuit. We present a brief description of the method, theoretical analysis and results of numerical simulation. A physical model concept of the method is also presented.
An encrypted database interfaced with an ultrafast secure data communication system using spatial-temporal converters is proposed. The original spatial signal is optically encrypted, and the encrypted signal is holographically stored in a storage medium such as photorefractive materials. The spatially encrypted signal is sampled to avoid the overlap of each datum at the receiver. The sampled data are converted into a temporal signal to transmit the information through an optical fiber. At the receiver the temporal signal is converted back into the spatially encrypted signal. Retrieval of the original data can be achieved when the correct phase key is used in the decryption system. We developed an expression for encrypted output and decrypted data. We numerically evaluate the effect of sampling the spatially encrypted signal on the quality of the decrypted data.