Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

Laser with a saturable absorber

Thomas Erneux, P. Glorieux

Published Apr 29, 2010• 0 citations
Publisher

Abstract

In a laser with a saturable absorber (LSA), two spatially separated cells are placed in the laser cavity as shown in Figure 8.1. The roles of the two cells are quite different: one of them is pumped so that the atoms have a positive population inversion (active or amplifying medium); the other one is left with a negative population inversion (passive or absorbing medium). As these two media are in general different, they saturate at different power levels. The most interesting case corresponds to the situation where the absorber saturates more easily than the active medium, introducing nonlinear losses inside the cavity. This new nonlinearity is responsible for two phenomena. An LSA may exhibit optical bistability, i.e. two distinct stable steady states may coexist for a range of values of a parameter. It may also produce pulsating intensity oscillations which have been called “passive Q-switching” (PQS) in contrast to “active Q-switching” experiments such as the “gain switching” experiments discussed in Section 1.3.2. The interest in LSAs varied very much over time, with peaks in the late 1960s for their large intensity pulses, in the mid 1980s for their chaotic outputs, and in the late 1990s for the design of compact microlasers. Historically, physicists trying to explain the irregular intensity pulses delivered by the ruby laser suspected the possible destabilizing role of a saturable absorber. Shimoda proposed that the nonlinear losses generated by a saturable absorber could explain this phenomenon.

DOI
10.1017/cbo9780511776908.009

Related papers

Analytic Studies of the Laser With a Saturable Absorber

Thomas Erneux

In the laser with a saturable absorber (LSA), the spontaneous and stimulated emissions build up in the laser cavity but are restrained by the intracavity absorber. As a result, two new modes of operation are observed: optical bistability and time-periodic intensity pulses. These two behaviors are not observed in the usual laser under normal conditions. Thus, the LSA is an example of an active system displaying optical bistability. (See Ref. 1 for a general review).

International Meeting on Instabilities and Dynamics of Lasers and Nonlinear Optical Systems•Jan 1, 1985•0 citations

Single- and two-mode models

Luigi A. Lugiato, Franco Prati, Massimo Brambilla

In the first section we discuss the stationary solutions for a laser with an injected signal, the active counterpart of the optical bistability analyzed in Chapter 11. Next, in Section 13.2 we consider another very interesting system, namely a laser with a saturable absorber, a free-running laser in which the optical cavity contains a passive medium in addition to the active medium. The single-mode model for this system can be constructed by combining the single-mode models for the free-running laser and for optical bistability. The discussion is then focussed on its stationary states. In Section 13.3 we return to the single-mode model for optical bistability and, by introducing an appropriate “cubic limit” on the parameters in play, we derive a cubic model for dispersive optical bistability with two-level atoms. The stationary equation for such a model formally coincides with that derived and discussed for a Kerr medium in Section 11.2. In the last section we start from the equations for a quadratic nonlinear medium in the degenerate configuration derived in Chapter 6 and combine them with the appropriate boundary conditions for the two field envelopes in play, assuming that the quadratic medium is contained in a ring cavity as happens in an optical parametric oscillator or in second-harmonic generation in a cavity. Next, by introducing the low-transmission limit and the single-mode limit we derive a two-mode model that describes the dynamics of a degenerate optical parametric oscillator or of second-harmonic generation in a cavity. Finally, for the case of a parametric oscillator we illustrate extensively the stationary solutions of the equations. A laser with an injected signal From a technical point of view, this system is interesting because of the possibility of stabilizing the frequency and the phase of separate lasers by taking advantage of the known affinity of nonlinear oscillators to lock onto a periodic forcing element. In 1972 Spencer and Lamb [125] predicted the possibility of bistable behavior in a laser with an injected signal before the surge of interest in optical bistability in the passive configuration.

Cambridge University Press eBooks•Feb 28, 2015•0 citations

OPTICAL BISTABILITY IN A TRIMODALE LASER CONTAINING A SATURABLE ABSORBER

S. Djabi, H. Boudoukha, M. Djabi

A simple mathematical model to describe the action of a saturable absorber in a laser cavity (LSA) was developed. The approach considered here takes in a phenomenological way into account the essential physical processes which makes it possible to determine the principal parameters in a LSA and their influences on the optical bistability. We will study theoretically optical bistability in a trimodale laser containing a saturable absorber in the case that the active medium and absorber show a homogeneous broadening. We determine the densities of photons as function of the pumping of the active medium and analyze the linear stability of the solutions obtained.

•Jan 28, 2015•1 citation

A nonlinear passive ring cavity: optical bistability

Luigi A. Lugiato, Franco Prati, Massimo Brambilla

In Chapter 9 we discussed the case of a nonlinear cavity containing an active medium. In this framework, the outstanding phenomenon which arises is laser emission, and we calculated the stationary solutions for the ring laser. In this chapter, instead, we turn our attention to the passive nonlinear cavity and in this framework the outstanding phenomenon is optical bistability , i.e. the existence of two distinct stable stationary states that coexist for the same fixed values of the parameters in play. This phenomenon can arise also in the case of an active system contained in a cavity, as we have already noted in Section 9.1 and as we will discuss further in connection with the laser with injected signal, but it became popular from the studies of nonlinear passive optical cavities in the 1970s and 1980s. In contrast to the laser case, in the passive configuration we use an input coherent field, which is injected into the cavity. We discussed this case in Chapter 8 and derived a general equation for the transmission of the cavity (Eq. (8.23)), which we used for an empty cavity and for a linear cavity in Sections 8.4 and 8.5, respectively. In this chapter we will discuss the full nonlinear configuration. It is customary to identify two extreme cases of optical bistability called absorptive optical bistability and dispersive or refractive optical bistability . In both cases an essential ingredient to obtain the bistable behavior is the feedback action exerted by the mirrors of the cavity. In the purely absorptive configuration, in which there is exact resonance among the frequencies of the input field, of the atoms and of the cavity, the other essential ingredient is the saturable nonlinearity of the absorption. In the dispersive case, instead, the main feature is the nonlinearity of the refractive index. These two cases will be illustrated in Sections 11.1 and 11.2, respectively, both “exactly” and in the low-transmission limit.

Cambridge University Press eBooks•Feb 28, 2015•0 citations

Investigations of intensity fluctuations in the laser with a saturable absorber

Mansour Mortazavi, Surendra Singh

The equation of motion for the slowly varying field amplitude of the laser containing an intracavity saturable absorber (LSA) is where a is the net gain (pump parameter) and b is a saturation parameter of the laser. In our experiment the absorber saturates faster than the amplifier and the parameter b is positive. q(t) is a complex Gaussian white noise random process representing spontaneous emission noise. From Eq. (1) we obtain for the steady-state probability density of light intensity I = | E |2. From this equation various moments of light intensity can be calculated and compared with experimentally measured quantities. For b > 0 the LSA exhibits bistability and a first order phase transition occurs at a = -3b2/16. For negative values of b there is a continuous transition at a = 0. Experiments were carried out on a He—Ne laser with an intracavity Ne absorber cell. The laser was operated close to the center of the absorption line. Slow drifts of light intensity were controlled by an electronic feedback loop. The parameter b was varied by changing the current in the absorber tube. Pump parameter a was then varied by changing passive losses in the cavity by means of an adjustable knife edge. The main beam from the LSA was allowed to fall on a detector/am- plifier combination. The voltage output from the detector was digitized by a multichannel analyzer and a histogram of voltage amplitudes was built up. Since the voltage output from the detector is directly proportional to the light intensity incident on the detector, voltage histogram is a direct representative of the intensity probability distribution. From the measured histogram moments of light intensity were calculated. These results are compared with the theoretical predictions.

Annual Meeting Optical Society of America•Jan 1, 1990•0 citations

ANALYTICAL MODEL FOR OPTICAL BISTABILITY IN LASER WITH SATURABLE ABSORBER

Smail Djabi, H. Boudoukha, Saïd Meguellati

In this paper, we develop a theoretical model that accurately describes the nonlinear phenomenon of optical bistability in Fabry-Perot laser containing a saturable absorber "LSA". We present an analytical model for optical bistability in a LSA. The physics of optical bistability in a classical optical resonant system such as Fabry-Perot etalon has been well-established, and can be described by simple analytical models. The photon intensities were determined as a function of the pumping rate of the active medium, and we analyzed the linear stability of the stationary solutions obtained.

Journal of Nonlinear Optical Physics & Materials•Sep 1, 2011•1 citation
In a laser with a saturable absorber (LSA), two spatially separated cells are placed in the laser cavity as shown in Figure 8.1. The roles of the two cells are quite different: one of them is pumped so that the atoms have a positive population inversion (active or amplifying medium); the other one is left with a negative population inversion (passive or absorbing medium). As these two media are in general different, they saturate at different power levels. The most interesting case corresponds to the situation where the absorber saturates more easily than the active medium, introducing nonlinear losses inside the cavity. This new nonlinearity is responsible for two phenomena. An LSA may exhibit optical bistability, i.e. two distinct stable steady states may coexist for a range of values of a parameter. It may also produce pulsating intensity oscillations which have been called “passive Q-switching” (PQS) in contrast to “active Q-switching” experiments such as the “gain switching” experiments discussed in Section 1.3.2. The interest in LSAs varied very much over time, with peaks in the late 1960s for their large intensity pulses, in the mid 1980s for their chaotic outputs, and in the late 1990s for the design of compact microlasers. Historically, physicists trying to explain the irregular intensity pulses delivered by the ruby laser suspected the possible destabilizing role of a saturable absorber. Shimoda proposed that the nonlinear losses generated by a saturable absorber could explain this phenomenon.
In the first section we discuss the stationary solutions for a laser with an injected signal, the active counterpart of the optical bistability analyzed in Chapter 11. Next, in Section 13.2 we consider another very interesting system, namely a laser with a saturable absorber, a free-running laser in which the optical cavity contains a passive medium in addition to the active medium. The single-mode model for this system can be constructed by combining the single-mode models for the free-running laser and for optical bistability. The discussion is then focussed on its stationary states. In Section 13.3 we return to the single-mode model for optical bistability and, by introducing an appropriate “cubic limit” on the parameters in play, we derive a cubic model for dispersive optical bistability with two-level atoms. The stationary equation for such a model formally coincides with that derived and discussed for a Kerr medium in Section 11.2. In the last section we start from the equations for a quadratic nonlinear medium in the degenerate configuration derived in Chapter 6 and combine them with the appropriate boundary conditions for the two field envelopes in play, assuming that the quadratic medium is contained in a ring cavity as happens in an optical parametric oscillator or in second-harmonic generation in a cavity. Next, by introducing the low-transmission limit and the single-mode limit we derive a two-mode model that describes the dynamics of a degenerate optical parametric oscillator or of second-harmonic generation in a cavity. Finally, for the case of a parametric oscillator we illustrate extensively the stationary solutions of the equations. A laser with an injected signal From a technical point of view, this system is interesting because of the possibility of stabilizing the frequency and the phase of separate lasers by taking advantage of the known affinity of nonlinear oscillators to lock onto a periodic forcing element. In 1972 Spencer and Lamb [125] predicted the possibility of bistable behavior in a laser with an injected signal before the surge of interest in optical bistability in the passive configuration.
A simple mathematical model to describe the action of a saturable absorber in a laser cavity (LSA) was developed. The approach considered here takes in a phenomenological way into account the essential physical processes which makes it possible to determine the principal parameters in a LSA and their influences on the optical bistability. We will study theoretically optical bistability in a trimodale laser containing a saturable absorber in the case that the active medium and absorber show a homogeneous broadening. We determine the densities of photons as function of the pumping of the active medium and analyze the linear stability of the solutions obtained.
In Chapter 9 we discussed the case of a nonlinear cavity containing an active medium. In this framework, the outstanding phenomenon which arises is laser emission, and we calculated the stationary solutions for the ring laser. In this chapter, instead, we turn our attention to the passive nonlinear cavity and in this framework the outstanding phenomenon is optical bistability , i.e. the existence of two distinct stable stationary states that coexist for the same fixed values of the parameters in play. This phenomenon can arise also in the case of an active system contained in a cavity, as we have already noted in Section 9.1 and as we will discuss further in connection with the laser with injected signal, but it became popular from the studies of nonlinear passive optical cavities in the 1970s and 1980s. In contrast to the laser case, in the passive configuration we use an input coherent field, which is injected into the cavity. We discussed this case in Chapter 8 and derived a general equation for the transmission of the cavity (Eq. (8.23)), which we used for an empty cavity and for a linear cavity in Sections 8.4 and 8.5, respectively. In this chapter we will discuss the full nonlinear configuration. It is customary to identify two extreme cases of optical bistability called absorptive optical bistability and dispersive or refractive optical bistability . In both cases an essential ingredient to obtain the bistable behavior is the feedback action exerted by the mirrors of the cavity. In the purely absorptive configuration, in which there is exact resonance among the frequencies of the input field, of the atoms and of the cavity, the other essential ingredient is the saturable nonlinearity of the absorption. In the dispersive case, instead, the main feature is the nonlinearity of the refractive index. These two cases will be illustrated in Sections 11.1 and 11.2, respectively, both “exactly” and in the low-transmission limit.
The equation of motion for the slowly varying field amplitude of the laser containing an intracavity saturable absorber (LSA) is where a is the net gain (pump parameter) and b is a saturation parameter of the laser. In our experiment the absorber saturates faster than the amplifier and the parameter b is positive. q(t) is a complex Gaussian white noise random process representing spontaneous emission noise. From Eq. (1) we obtain for the steady-state probability density of light intensity I = | E |2. From this equation various moments of light intensity can be calculated and compared with experimentally measured quantities. For b > 0 the LSA exhibits bistability and a first order phase transition occurs at a = -3b2/16. For negative values of b there is a continuous transition at a = 0. Experiments were carried out on a He—Ne laser with an intracavity Ne absorber cell. The laser was operated close to the center of the absorption line. Slow drifts of light intensity were controlled by an electronic feedback loop. The parameter b was varied by changing the current in the absorber tube. Pump parameter a was then varied by changing passive losses in the cavity by means of an adjustable knife edge. The main beam from the LSA was allowed to fall on a detector/am- plifier combination. The voltage output from the detector was digitized by a multichannel analyzer and a histogram of voltage amplitudes was built up. Since the voltage output from the detector is directly proportional to the light intensity incident on the detector, voltage histogram is a direct representative of the intensity probability distribution. From the measured histogram moments of light intensity were calculated. These results are compared with the theoretical predictions.
In this paper, we develop a theoretical model that accurately describes the nonlinear phenomenon of optical bistability in Fabry-Perot laser containing a saturable absorber "LSA". We present an analytical model for optical bistability in a LSA. The physics of optical bistability in a classical optical resonant system such as Fabry-Perot etalon has been well-established, and can be described by simple analytical models. The photon intensities were determined as a function of the pumping rate of the active medium, and we analyzed the linear stability of the stationary solutions obtained.